1771-NT2 - In Stock | Allen Bradley PLC PLC 5

1771-NT2

Rated 4.6 with 8 reviews

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.


credit cards accepted
better business bureau

1771-NT2

Revisions: Ser A Ser B Ser C 
Description: The 1771-NT2 input module is a thermocouple type of input module with 8 channels. It has been designed and manufactured by Allen-Bradley in the PLC 5 product line. The 1771-NT2 thermocouple input module supports thermocouple inputs that are Type B, E, J, K, R, S, and T thermocouple inputs, and it also supports Type C and Type N thermocouple inputs, which not every PLC 5 thermocouple input module can support. This input module is open-type equipment, which means that it does not have a protective enclosure. The 1771-NT2 thermocouple input module should not be used at temperatures higher than 60 degrees Celsius or at non-condensing relative humidity levels higher than 95%.
In Stock Ships Today
Request a quote for 1771-NT2

Description: The 1771-NT2 input module is a thermocouple type of input module with 8 channels. It has been designed and manufactured by Allen-Bradley in the PLC 5 product line. The 1771-NT2 thermocouple input module supports thermocouple inputs that are Type B, E, J, K, R, S, and T thermocouple inputs, and it also supports Type C and Type N thermocouple inputs, which not every PLC 5 thermocouple input module can support. This input module is open-type equipment, which means that it does not have a protective enclosure. The 1771-NT2 thermocouple input module should not be used at temperatures higher than 60 degrees Celsius or at non-condensing relative humidity levels higher than 95%.

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

disclaimer
credit cards
better business bureau
Revisions: Ser A Ser B Ser C 

Warranty: 1 year DO Supply Warranty Included
Shipping: Worldwide shipping via UPS, DHL, and TNT
Repairs: We offer repair service for the 1771-NT2.
Exchange: Exchange credit for your defective unit available.
Conditions: We sell preowned surplus and refurbished parts.

To speak to a sales representative for pricing & lead time:


Rated 4.6 with 8 reviews

    Technical Specifications for 1771-NT2

ManufacturerRockwell Automation
BrandAllen-Bradley
Part Number/Catalog No.1771-NT2
Module TypeN-Series Analog I/O Module
Number of Inputs8 Inputs
Input TypesTC/Milivolt
Input Resolution-5/+55 Milivolts (0.95 Microvolt/bit); B, R, S, Thermocouple (0.03 Celsius/bit, 0.06 Milivolt/bit); E, J, K, T, Thermocouple (0.1 Celsius/bit, 0.2 Fahrenheit/bit); C Thermocouple (0.07 Celsius/bit, 0.1 Fahrenheit/bit); N Thermocouple (0.03 Celsius/bit, 0.
Number of Outputs0 Outputs
Output TypeN/A
Output ResolutionN/A
RTP Choice1771-RTP1
Backplane Current1.5 Amperes
Data FormatBDC or Natural Binary
Typical AC Signal Delay (Off)45 (+/- 15) ms
Typical DC Signal Delay (Off)50 ms
Wiring Arm1771-WH
MountingRack Mountable
ManufacturerRockwell Automation
BrandAllen-Bradley
Part Number/Catalog No.1771-NT2
Module TypeN-Series Analog I/O Module
Number of Inputs8 Inputs
Input TypesTC/Milivolt
Input Resolution-5/+55 Milivolts (0.95 Microvolt/bit); B, R, S, Thermocouple (0.03 Celsius/bit, 0.06 Milivolt/bit); E, J, K, T, Thermocouple (0.1 Celsius/bit, 0.2 Fahrenheit/bit); C Thermocouple (0.07 Celsius/bit, 0.1 Fahrenheit/bit); N Thermocouple (0.03 Celsius/bit, 0.
Number of Outputs0 Outputs
Output TypeN/A
Output ResolutionN/A
RTP Choice1771-RTP1
Backplane Current1.5 Amperes
Data FormatBDC or Natural Binary
Typical AC Signal Delay (Off)45 (+/- 15) ms
Typical DC Signal Delay (Off)50 ms
Wiring Arm1771-WH
MountingRack Mountable
s

About 1771-NT2

The Allen Bradley High-resolution Isolated Analog Module 1771-NT2 has 0.01% typical accuracy based on 65,000 count capability over Full Scale Range (FSR). This module has programmable reset values for outputs; it selects the best reset value specified by the application requirements, with each channel being configured independently. The 1771-NT2 was designed for demanding applications including process control; it has a 16-bit resolution, an Input Bandwidth of 9 Hertz, and a maximum update time of  25 milliseconds.



The 1771-NT2 has an underrange threshold of -5.5 mV while its overrange threshold is +56.0 mV. Its normal mode rejection  is (50/60 Hertz) of 50dB/60dB (minimum) with a common mode rejection at (60 Hertz) of 150dB (typical). Dissipating power at 5 Volts of 5 Watts, its maximum backplane current is 1 A.



The relative humidity of this unit is generally between 5% and 95% without condensation; its operating temperature usually lies between 0 and 60 degrees Celsius (32 to 140 degrees Fahrenheit) while its nonoperating temperature hangs between -40 and 85 degrees Celsius (-40 to 185 degrees Fahrenheit).



The 1771-NT2 is manufactured as open type equipment: its expected use is in an industrial environment no greater than Pollution 2 (as defined in EN / IEC0664-1) when applied in a Zone 2 environment, and its enclosure should be accessible only by means of the appliance. It is advisable to use IOCONFIG to configure this module.



Technical Description of 1771-NT2

Allen Bradley PLC 5 N-Series Analog I/O Module, 8 Inputs, 0 Outputs, 1.5 Amperes Backplane Current, BDC or Natural Binary Data Format

Repair Services for 1771-NT2

Type Lead Time Price Action
Repair Service 2-4 weeks $1352cartAdd to Cart

Our highly skilled technicians can repair your 1771-NT2. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Revisions for 1771-NT2

Please refer to the manual for more information about the 1771-NT2 such as the wiring diagrams, data sheets and migration or obsolescence details.

Revision Part # Also Known as Availability
1771-NT2 Ser A
1771-NT2/A, Series A, Rev A Request Quote
1771-NT2/B, Series B, Rev B Request Quote
1771-NT2 Ser C
1771-NT2/C, Series C, Rev C Request Quote
Common misspellings:
  • l771-NT2
  • 177l-NT2
  • 1771NT2

Dimensions For 1771-NT2

Size
Input Type
Panel Cutout Height in mm
Panel Cutout Width in mm
Terminal Height in mm
Terminal Width in mm
Terminal Overall Depth in mm
Terminal Mounted Depth in mm

Dimensions For 1771-NT2

Resolutions For 1771-NT2

About

Technical Specifications for 1771-NT2

ManufacturerRockwell Automation
BrandAllen-Bradley
Part Number/Catalog No.1771-NT2
Module TypeN-Series Analog I/O Module
Number of Inputs8 Inputs
Input TypesTC/Milivolt
Input Resolution-5/+55 Milivolts (0.95 Microvolt/bit); B, R, S, Thermocouple (0.03 Celsius/bit, 0.06 Milivolt/bit); E, J, K, T, Thermocouple (0.1 Celsius/bit, 0.2 Fahrenheit/bit); C Thermocouple (0.07 Celsius/bit, 0.1 Fahrenheit/bit); N Thermocouple (0.03 Celsius/bit, 0.
Number of Outputs0 Outputs
Output TypeN/A
Output ResolutionN/A
RTP Choice1771-RTP1
Backplane Current1.5 Amperes
Data FormatBDC or Natural Binary
Typical AC Signal Delay (Off)45 (+/- 15) ms
Typical DC Signal Delay (Off)50 ms
Wiring Arm1771-WH
MountingRack Mountable
ManufacturerRockwell Automation
BrandAllen-Bradley
Part Number/Catalog No.1771-NT2
Module TypeN-Series Analog I/O Module
Number of Inputs8 Inputs
Input TypesTC/Milivolt
Input Resolution-5/+55 Milivolts (0.95 Microvolt/bit); B, R, S, Thermocouple (0.03 Celsius/bit, 0.06 Milivolt/bit); E, J, K, T, Thermocouple (0.1 Celsius/bit, 0.2 Fahrenheit/bit); C Thermocouple (0.07 Celsius/bit, 0.1 Fahrenheit/bit); N Thermocouple (0.03 Celsius/bit, 0.
Number of Outputs0 Outputs
Output TypeN/A
Output ResolutionN/A
RTP Choice1771-RTP1
Backplane Current1.5 Amperes
Data FormatBDC or Natural Binary
Typical AC Signal Delay (Off)45 (+/- 15) ms
Typical DC Signal Delay (Off)50 ms
Wiring Arm1771-WH
MountingRack Mountable

About 1771-NT2

The Allen Bradley High-resolution Isolated Analog Module 1771-NT2 has 0.01% typical accuracy based on 65,000 count capability over Full Scale Range (FSR). This module has programmable reset values for outputs; it selects the best reset value specified by the application requirements, with each channel being configured independently. The 1771-NT2 was designed for demanding applications including process control; it has a 16-bit resolution, an Input Bandwidth of 9 Hertz, and a maximum update time of  25 milliseconds.



The 1771-NT2 has an underrange threshold of -5.5 mV while its overrange threshold is +56.0 mV. Its normal mode rejection  is (50/60 Hertz) of 50dB/60dB (minimum) with a common mode rejection at (60 Hertz) of 150dB (typical). Dissipating power at 5 Volts of 5 Watts, its maximum backplane current is 1 A.



The relative humidity of this unit is generally between 5% and 95% without condensation; its operating temperature usually lies between 0 and 60 degrees Celsius (32 to 140 degrees Fahrenheit) while its nonoperating temperature hangs between -40 and 85 degrees Celsius (-40 to 185 degrees Fahrenheit).



The 1771-NT2 is manufactured as open type equipment: its expected use is in an industrial environment no greater than Pollution 2 (as defined in EN / IEC0664-1) when applied in a Zone 2 environment, and its enclosure should be accessible only by means of the appliance. It is advisable to use IOCONFIG to configure this module.



Technical Description of 1771-NT2

Allen Bradley PLC 5 N-Series Analog I/O Module, 8 Inputs, 0 Outputs, 1.5 Amperes Backplane Current, BDC or Natural Binary Data Format
Repairs
Type Lead Time Price Action
Repair Service 2-4 weeks $1352cartAdd to Cart

Our highly skilled technicians can repair your 1771-NT2. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Type Lead Time Price Action
Repair Service 2-4 weeks $1352cartAdd to Cart

Our highly skilled technicians can repair your 1771-NT2. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Revisions

Please refer to the manual for more information about the 1771-NT2 such as the wiring diagrams, data sheets and migration or obsolescence details.

Revision Part # Also Known as Availability
1771-NT2 Ser A
1771-NT2/A, Series A, Rev A Request Quote
1771-NT2/B, Series B, Rev B Request Quote
1771-NT2 Ser C
1771-NT2/C, Series C, Rev C Request Quote

Common misspellings:
  • l771-NT2
  • 177l-NT2
  • 1771NT2
PDF