Free UPS Ground on All Orders!
Request a
Fast Quote
Account
Cart
Quote
+1 (919) 205-4392
Allen Bradley PLC 5 1771-NT2

Product image is representative; revision or series may vary. Contact us to request a specific version.

1771-NT2

|
Need a Specific Revision?

The 1771-NT2 input module is a thermocouple type of input module with 8 channels. It has been designed and manufactured by Allen-Bradley in the PLC 5 product line. The 1771-NT2 thermocouple input module supports thermocouple inputs that are Type B, E, J, K, R, S, and T thermocouple inputs, and it also supports Type C and Type N thermocouple inputs, which not every PLC 5 thermocouple input module can support. This input module is open-type equipment, which means that it does not have a protective enclosure. The 1771-NT2 thermocouple input module should not be used at temperatures higher than 60 degrees Celsius or at non-condensing relative humidity levels higher than 95%.

In Stock
Ships from Raleigh, NC
2 Year DO Supply Warranty
Not an Authorized Distributor: DO Supply is not an authorized distributor for listed manufacturers or tradenames and therefore the manufacturer's warranty does not apply. All of our products come with DO Supply's 2-year warranty.
Learn more
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Technical specifications for 1771-NT2

ManufacturerAllen Bradley
CategoryPLCs
Product LinePLC 5
Part Number1771-NT2
UPC612598123339
Weight1.75 lbs (0.79 kg)
Module TypeN-Series Analog I/O Module
Number of Inputs8 Inputs
Input TypesTC/Milivolt
Input Resolution-5/+55 Milivolts (0.95 Microvolt/bit); B, R, S, Thermocouple (0.03 Celsius/bit, 0.06 Milivolt/bit); E, J, K, T, Thermocouple (0.1 Celsius/bit, 0.2 Fahrenheit/bit); C Thermocouple (0.07 Celsius/bit, 0.1 Fahrenheit/bit); N Thermocouple (0.03 Celsius/bit, 0.
Number of Outputs0 Outputs
Output TypeN/A
Output ResolutionN/A
RTP Choice1771-RTP1
Backplane Current1.5 Amperes
Data FormatBDC or Natural Binary
Typical AC Signal Delay (Off)45 (+/- 15) ms
Typical DC Signal Delay (Off)50 ms
Wiring Arm1771-WH
MountingRack Mountable
View as PDF
Request a Repair

The Allen Bradley High-resolution Isolated Analog Module 1771-NT2 has 0.01% typical accuracy based on 65,000 count capability over Full Scale Range (FSR). This module has programmable reset values for outputs; it selects the best reset value specified by the application requirements, with each channel being configured independently. The 1771-NT2 was designed for demanding applications including process control; it has a 16-bit resolution, an Input Bandwidth of 9 Hertz, and a maximum update time of  25 milliseconds.

The 1771-NT2 has an underrange threshold of -5.5 mV while its overrange threshold is +56.0 mV. Its normal mode rejection  is (50/60 Hertz) of 50dB/60dB (minimum) with a common mode rejection at (60 Hertz) of 150dB (typical). Dissipating power at 5 Volts of 5 Watts, its maximum backplane current is 1 A.

The relative humidity of this unit is generally between 5% and 95% without condensation; its operating temperature usually lies between 0 and 60 degrees Celsius (32 to 140 degrees Fahrenheit) while its nonoperating temperature hangs between -40 and 85 degrees Celsius (-40 to 185 degrees Fahrenheit).

The 1771-NT2 is manufactured as open type equipment: its expected use is in an industrial environment no greater than Pollution 2 (as defined in EN / IEC0664-1) when applied in a Zone 2 environment, and its enclosure should be accessible only by means of the appliance. It is advisable to use IOCONFIG to configure this module.

Revision Part #Also known as
1771-NT2 Ser A1771-NT2/A, Series A, Rev A
1771-NT2 Ser B1771-NT2/B, Series B, Rev B
1771-NT2 Ser C1771-NT2/C, Series C, Rev C
Don't see your particular revision? Contact us now.