1771-OGC - In Stock | Allen Bradley PLC PLC 5

1771-OGC

Rated 4.3 with 15 reviews

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.


credit cards accepted
better business bureau

1771-OGC

Revisions: Ser A 
Description: Allen Bradley PLC 5 Digital DC Output Module, 8 Ouputs, 5.0-5.3 Volts DC Operating Voltage, 168 Miliamperes Backplane Current, Earlier Model
In Stock Ships Today
Request a quote for 1771-OGC

Description:

Allen Bradley PLC 5 Digital DC Output Module, 8 Ouputs, 5.0-5.3 Volts DC Operating Voltage, 168 Miliamperes Backplane Current, Earlier Model


DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

disclaimer
credit cards
better business bureau
Revisions: Ser A 

Warranty: 1 year DO Supply Warranty Included
Shipping: Worldwide shipping via UPS, DHL, and TNT
Repairs: We offer repair service for the 1771-OGC.
Exchange: Exchange credit for your defective unit available.
Conditions: We sell preowned surplus and refurbished parts.

To speak to a sales representative for pricing & lead time:


Rated 4.3 with 15 reviews

    Technical Specifications for 1771-OGC

ManufacturerRockwell Automation
BrandAllen-Bradley
Part Number/Catalog No.1771-OGC
Module TypeDigital DC Output Module
Number of Outputs8 Ouputs
Voltage Category5 Volts DC, TTL
DC Operating Voltage5.0-5.3 Volts
Backplane Current168 Miliamperes
Max Continuous Current Per Output0.02 Amperes (Sink) and 0.001 Amperes (Source)
Max Continuous Current Per ModuleN/A
Wiring Arm1771-WC
Model StatusEarlier Model
CoatingConformal Coat
Typical AC Signal Delay (Off)45 (+/- 15) ms
Typical DC Signal Delay (Off)50 ms
Wiring Arm1771-WH
Model StatusEarlier Model
ManufacturerRockwell Automation
BrandAllen-Bradley
Part Number/Catalog No.1771-OGC
Module TypeDigital DC Output Module
Number of Outputs8 Ouputs
Voltage Category5 Volts DC, TTL
DC Operating Voltage5.0-5.3 Volts
Backplane Current168 Miliamperes
Max Continuous Current Per Output0.02 Amperes (Sink) and 0.001 Amperes (Source)
Max Continuous Current Per ModuleN/A
Wiring Arm1771-WC
Model StatusEarlier Model
CoatingConformal Coat
Typical AC Signal Delay (Off)45 (+/- 15) ms
Typical DC Signal Delay (Off)50 ms
Wiring Arm1771-WH
Model StatusEarlier Model
s

About 1771-OGC

The 1771-OGC PLC 5 Transistor-Transistor Logic Output Module by is an output module by Allen-Bradley which has 8 sourcing/sinking outputs and it is installed in any available slot of the 1771 chassis. It has an operational output voltage ranging between 2 and 5.25V DC (High = True), and -0.2V DC and +0.8V DC (Low = True) Logic, and it requires a maximum 20mA (sink)/1mA (source) output current.  The 1771-OGC requires a 5V (+0.25V) DC separate power source with a maximum ripple less than 50mV, peak-to-peak, and 250mA output current for transmission of Transistor-Transistor Logic (TTL) signals. It has 1ms maximum signal delay time in its output, and when operational, it dissipates 7.5 BTU/hr of maximum heat. 

The 1771-OGC draws an overall backplane current of 168mA and offers 1 second tested 1500V AC circuit voltage isolation. It requires a Field Wiring Arm with a screw torque of 7 x 9 inch-pounds and it circuitry uses a 14-gauge stranded maximum Shielded Belden 8761 wire size with 3/64 inches thick insulation as circuit conductors. Keying of the module is achieved by connection of the top connector between pins 6 – 8 and pins 10 – 12, and is CE, UL, and CSA-certified. The 1771-OGC’s operational temperature ranges between 32 and 140 0F at 5-95% non-condensing relative humidity environment and is stored between -40 and 185 0F.



Repair Services for 1771-OGC

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 1771-OGC. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Revisions for 1771-OGC

Please refer to the manual for more information about the 1771-OGC such as the wiring diagrams, data sheets and migration or obsolescence details.

Revision Part # Also Known as Availability
1771-OGC Ser A
1771-OGC/A, Series A, Rev A Request Quote
Common misspellings:
  • l771-OGC
  • 177l-OGC
  • 1771-0GC
  • 1771OGC

Dimensions For 1771-OGC

Size
Input Type
Panel Cutout Height in mm
Panel Cutout Width in mm
Terminal Height in mm
Terminal Width in mm
Terminal Overall Depth in mm
Terminal Mounted Depth in mm

Dimensions For 1771-OGC

Resolutions For 1771-OGC

About

Technical Specifications for 1771-OGC

ManufacturerRockwell Automation
BrandAllen-Bradley
Part Number/Catalog No.1771-OGC
Module TypeDigital DC Output Module
Number of Outputs8 Ouputs
Voltage Category5 Volts DC, TTL
DC Operating Voltage5.0-5.3 Volts
Backplane Current168 Miliamperes
Max Continuous Current Per Output0.02 Amperes (Sink) and 0.001 Amperes (Source)
Max Continuous Current Per ModuleN/A
Wiring Arm1771-WC
Model StatusEarlier Model
CoatingConformal Coat
Typical AC Signal Delay (Off)45 (+/- 15) ms
Typical DC Signal Delay (Off)50 ms
Wiring Arm1771-WH
Model StatusEarlier Model
ManufacturerRockwell Automation
BrandAllen-Bradley
Part Number/Catalog No.1771-OGC
Module TypeDigital DC Output Module
Number of Outputs8 Ouputs
Voltage Category5 Volts DC, TTL
DC Operating Voltage5.0-5.3 Volts
Backplane Current168 Miliamperes
Max Continuous Current Per Output0.02 Amperes (Sink) and 0.001 Amperes (Source)
Max Continuous Current Per ModuleN/A
Wiring Arm1771-WC
Model StatusEarlier Model
CoatingConformal Coat
Typical AC Signal Delay (Off)45 (+/- 15) ms
Typical DC Signal Delay (Off)50 ms
Wiring Arm1771-WH
Model StatusEarlier Model

About 1771-OGC

The 1771-OGC PLC 5 Transistor-Transistor Logic Output Module by is an output module by Allen-Bradley which has 8 sourcing/sinking outputs and it is installed in any available slot of the 1771 chassis. It has an operational output voltage ranging between 2 and 5.25V DC (High = True), and -0.2V DC and +0.8V DC (Low = True) Logic, and it requires a maximum 20mA (sink)/1mA (source) output current.  The 1771-OGC requires a 5V (+0.25V) DC separate power source with a maximum ripple less than 50mV, peak-to-peak, and 250mA output current for transmission of Transistor-Transistor Logic (TTL) signals. It has 1ms maximum signal delay time in its output, and when operational, it dissipates 7.5 BTU/hr of maximum heat. 

The 1771-OGC draws an overall backplane current of 168mA and offers 1 second tested 1500V AC circuit voltage isolation. It requires a Field Wiring Arm with a screw torque of 7 x 9 inch-pounds and it circuitry uses a 14-gauge stranded maximum Shielded Belden 8761 wire size with 3/64 inches thick insulation as circuit conductors. Keying of the module is achieved by connection of the top connector between pins 6 – 8 and pins 10 – 12, and is CE, UL, and CSA-certified. The 1771-OGC’s operational temperature ranges between 32 and 140 0F at 5-95% non-condensing relative humidity environment and is stored between -40 and 185 0F.



Repairs
Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 1771-OGC. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 1771-OGC. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Revisions

Please refer to the manual for more information about the 1771-OGC such as the wiring diagrams, data sheets and migration or obsolescence details.

Revision Part # Also Known as Availability
1771-OGC Ser A
1771-OGC/A, Series A, Rev A Request Quote

Common misspellings:
  • l771-OGC
  • 177l-OGC
  • 1771-0GC
  • 1771OGC
PDF