Free UPS Ground on All Orders!
Request a
Fast Quote
Account
Cart
Quote
+1 (919) 205-4392
Allen Bradley PLC 5 1771-RTP4

Product image is representative; revision or series may vary. Contact us to request a specific version.

1771-RTP4

|
Need a Specific Revision?

The 1771-RTP4 remote termination panel or RTP is an Allen-Bradley PLC 5 series general-use remote termination panel. It supports all applications except for thermocouple applications. The 1771-RTP4 remote termination panel has straight-thru wiring. This RTP can be used with current input devices and also with voltage input devices as long as the voltage input devices are accompanied by a resistor. The 1771-RTP4 remote termination panel can support up to 8 I/O modules at a time.

In Stock
Ships from Raleigh, NC
2 Year DO Supply Warranty
Not an Authorized Distributor: DO Supply is not an authorized distributor for listed manufacturers or tradenames and therefore the manufacturer's warranty does not apply. All of our products come with DO Supply's 2-year warranty.
Learn more
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Technical specifications for 1771-RTP4

ManufacturerAllen Bradley
CategoryPLCs
Product LinePLC 5
Part Number1771-RTP4
UPC612598116751
Weight0.50 lbs (0.23 kg)
Module TypeRemote Termination Panels and Cables
Number of I/O Modules8 I/O Modules
Cold-Junction-Compensation for Thermocouple InputNo
Usage for Current InputsYes
Usage for Voltage InputsYes, with resistor
Wiring Arm1771-WF
Frequency47-63 Hertz
Fuse3 Amperes, 250 Volts, Normal-Blow
Cabling1771-PSCC Remote 5.5 ft
ParalleledN/A
LocationStand-Alone
View as PDF
Request a Repair

The 1771-RTP4 PLC 5 Remote Termination Panel by Allen-Bradley is an electrical device used with the N-series High-Resolution Analog I/O modules to provide a Remote Termination System and the panel itself is designed for mounting on the Standard DIN 1 and DIN 3 mounting rails. The 1771-RTP4 has a field wiring connector and it establishes a connection to the N-Series I/O modules via the two 1.8m (6ft)-long 1771-NC6 Pre-fabricated cables and it has a maximum of 8 I/O connections. It is an 8-channel termination panel with voltage inputs, RTD, and voltage outputs, and it can be used for most applications except thermocouples. Mounting of the 1771-RTP4 is done via the Asymmetrical and Symmetrical 1 or 3 DIN rails, and it is designed to reduce additional cost by eliminating wiring between a Terminal Strip and a Wiring Arm and it makes the removal or replacement of an I/O possible without disturbing the current loop. The entire 1771-RTP4 Termination Panel weighs approximately 0.2Kg (0.5lb), and has dimensions of 75mm x 138mm x 58mm (3.0in x 5.3in x 3.0in).

Revision Part #Also known as
1771-RTP4 Ser A1771-RTP4/A, Series A, Rev A
Don't see your particular revision? Contact us now.