Product image is representative; revision or series may vary. Contact us to request a specific version.
The Allen-Bradley 1785-KA3 module is a PLC 2 series communication adapter module and an interface module. Its backplane current rating is 1.2 Amps at 5 Volts DC. The 1785-KA3 communication and interface module allows a PLC 2 programmable controller to communicate with other devices over the Data Highway Plus network. This communication adapter module needs to be installed in a slot in an Allen-Bradley Bulletin 1771 I/O chassis. The 1785-KA3 communication and interface module draws its 1.2 Amps of required backplane current from the Bulletin 1771 I/O chassis.
We sell industrial automation parts backed by our free 2-Year DO Supply Warranty.
Same-day domestic and fast international shipping with UPS, FedEx, DHL, and more.
AMEX, Visa, MasterCard, Discover, wire transfer, net terms, and more.
Repairs and exchanges are available for all automation products.
Drop shipping, blind shipping, and account shipping with no extra fees.
| Manufacturer | Allen Bradley |
|---|---|
| Category | PLCs |
| Product Line | PLC 5 |
| Part Number | 1785-KA3 |
| Weight | 1.88 lbs (0.85 kg) |
| Module Type | Communication Adaptor Interface Module |
| Backplane Requirement | 1.2 Amperes at 5 Volts DC |
| Interface Ports | Data Highway, Data Highway Plus, and Allen-Bradley Industrial Terminal (Series 1784) |
| Operation | Process Messages |
| Communication w/ PLC Processor | Direct Connection to Channel 3 of PLC-5 Processor |
| LEDs | 1 Diagnosis/Status Per Channel |
| Max Modules Per System | 4 |
| Coating | Conformal Coat |
| Required External Power | None |
| Typical AC Signal Delay (Off) | 29 (+/- 8) ms |
| Typical DC Signal Delay (Off) | 30 (+/- 7) ms |
| Wiring Arm | 1771-WN |
The 1785-KA3 PLC-2 Family Communication Adapter Module by Allen Bradley is a communication adapter installed on any slot (except the furthest left) of the 1771 I/O chassis, which links the PLC-2 family processors to a Data Highway Plus (DH+) Network. The 1785-KA3 draws 1.2 A backplane current at 5 Volts DC. It has an interface port for connection to the PLC-2 Programmable Controller using the Data Highway Plus Processor cable and a Data Highway Plus drop-line, and for connection to the 1784-T50 Industrial Workstation using the Program Panel Interconnect Cable.
The 1785-KA3 has 3 sets of switches: the Data Highway Plus baud rate switch assembly, the write options switch assembly and the node address group switch. These switches determine the mode of connection with other nodes on the network.
This unit supports most PLC-2 family processors, and the module is keyed to the backplane by connecting the band between pins 4 and 6, 22 and 24 of the top connector. Its temperature range is between 0 and 60 degrees Celsius (32 to 140 degrees Fahrenheit) at 5% to 95% non-condensing relative humidity; its storage temperature is between -40 to 85 degrees Celsius (-40 to 185 degrees Fahrenheit).
| Revision Part # | Also known as | |
|---|---|---|
| 1785-KA3 Ser A | 1785-KA3/A, Series A, Rev A | |
| Don't see your particular revision? Contact us now. | ||
Allen Bradley PLC 5 Communication Adaptor Interface Module, 1.2 Amperes at 5 Volts DC Backplane Requirement