1734-OW4
This relay output module supports a range of functionalities with its four outputs. Each output uses normally-open isolated electromechanical relays, characterized by a maximum off-state leakage curre
The Allen-Bradley Point I/O 1734 modular system is designed to be different from the standard PLC controller configuration, signal acquisition, and actuator control assignment options. It is made to be an in-cabinet modular I/O platform whose modules can be stacked 1 to another and have 1 to 8 channels configured as analog or digital inputs or outputs. The system also has Ethernet, ControlNet, DeviceNet, or PROFIBUS adapters, RTD and thermocouple units, inputs for receiving signals from 5 Volts or 24 Volts rated encoders, I/O link masters, and RS-232 and RS-485 interface modules. The Point I/O 1734 system can exchange data with the PLCs whether they are installed in the same cabinet or whether they are serving as distributed I/O consoles that are positioned in extremely inaccessible and remote parts of the plant. This flexibility is further enhanced by the fact that safe and standard I/O modules can be installed in the same rack.
The Allen-Bradley Point I/O 1734 modular system in the Allen-Bradley/Rockwell Automation Integrated Architecture allows the users to diagnose each channel individually within any installed module when there is short-circuiting or disconnected wire, and it even supports alarm configuring by the users and filtering options. The system is software supported by the Studio 5000 application software and they have local autonomous control. The modules installed in the Point I/O 1734 system can be removed and inserted under power (RIUP), which is one of the most useful features for automated systems where it is vital to replace defective components. With 2 Ethernet ports, this modular I/O system can be configured as a part of a linear, star, and ring EtherNet/IP network topologies while processing up to 504 channels locally.
Browse available units in our catalog of Point I/O 1734.
This relay output module supports a range of functionalities with its four outputs. Each output uses normally-open isolated electromechanical relays, characterized by a maximum off-state leakage curre
Designed for industrial applications, this analog input module supports two distinct input channels, both with 16-bit high-resolution capability. It features an absolute accuracy of 0.1% at 25°C and o
The 1734-OE2V module features a total of two outputs and can deliver a current load of 3 mA on its voltage output. It converts digital signals to analog within a signed integer data format. Additional
This mounting base functions effectively within a temperature range from 0 to 40 degrees Celsius for operation, while storage conditions should not exceed 0 to 50 degrees Celsius. It is designed to ha
This module provides two outputs and operates as a digital to analog converter. Its outputs can handle resistive loads between 0 and 750 Ohms. It includes a logic side with multiple indicators for mod
This module supports non-isolated, single-ended inputs and includes status indicators for operational monitoring. Its absolute accuracy rating is 0.1% full scale at 25 degrees Celsius. The 1734-IR2 ut
This input module accommodates two user-configurable inputs with an input impedance of 100 kiloohms and an input resistance measuring 200 kiloohms. Data conversion employs a delta-sigma method while o
Designed to fit within the POINT I/O system, the 1734-FPD operates with a nominal input of 120/240V AC and 12/24V DC, with a DC input voltage range of 10 to 28.8V DC. This module is open-style and sup
This module supports eight outputs, forming a single group within its architecture. The device is designed for non-isolated sourcing and can handle a minimum on-state voltage of 10V DC, typically oper
This ASCII module operates on a nominal supply voltage of 24V DC and accommodates a voltage supply range of 10 to 28.8V DC. It supports one full duplex input and has a special keyswitch position set t