The 5110-A8A is an Allen Bradley Chassis 8 Slot Pyramid Integrator AB processor board. It is a chassis-based pyramid integrator that comes with up to 8 modules per chassis. The logic processor from Allen Bradley provides the users added functionality to Allen Bradley control systems. The 5110-A8A CHASSIS 8 SLOT Pyramid Integrator AB is compatible will the Allen Bradley Logic Processor Daughterboard pyramid integrator AB. The 5110-A8A can execute control functions from the different sources and it is able to perform ladder-logic programming. The 5110-A8A utilizes input data from a similar integrator modules belonging to the same chassis as well as other devices that are connected to the RM or KA through a DH+ or a DH- link. When installing and setting up the module, first verify that there is room for a module on the chassis. Note that on a single chassis it is possible to install up to eight modules. Before installing the 5110-A8A, switch off the power supply and then insert the pyramid integrator. Before powering the system, carefully verify that the module is seated firmly on the backplane of the chassis. Then secure the module into place in order to ensure that it doesn’t move. Use the thumbscrews to secure the module before you turn on the power supply.

With the 5110-A8A firmly placed in place, make sure that the power supply is properly installed unscrew the battery holder from the logic processor module and place the battery into a strong holder. Then screw back the battery into the holder without tightening the holder. The 5110-A8A allows the user to lower the support costs and offers the ongoing availability of automation replacement parts.