5810-AXMT
This transceiver features a panel mount design, secured with a screw fastened faceplate. It utilizes a die-cast metal housing for durability and comes with a cable tap connector. The unit maintains op
In Stock Ships Today
4.7
Free UPS Ground on All Orders!
+1 (919) 205-4392
Allen Bradley Pyramid Integrator
The Allen Bradley AB Pyramid Integrator PLC System Module Processor Board and PLC-5 250.
Learn more
Browse Pyramid Integrator
Browse available units in our catalog of Pyramid Integrator.
5710-ID5A
With a memory capacity of 418 megabytes, this module utilizes a Small Computer System Interface (SCSI) for connections. It mounts in a chassis and supports a horsepower rating of 150. Designed for 3-p
Call
5.0
5250-LP1
This logic processor accommodates execution of logic control, data table memory, and SFC functions, alongside traditional ladder logic. It can handle up to 32 background programs and supports a maximu
Available
5.0
5250-LP
This logic processor features a memory capacity of 192K. It is designed to function within a temperature range of 0°C to 40°C for optimal performance. Additionally, it can tolerate up to 80% non-conde
In Stock Ships Tomorrow
5.0
5820-EI
This Ethernet interface module utilizes a maximum current draw of 5 A and can operate at a baud rate of 10 Mbps. It draws 2.5 Amperes from the PLC backplane, providing the necessary power requirement.
In Stock Ships Today
4.7
5710-ID5
This disk operates at input voltages between 110 and 220 VAC and utilizes a 32-bit 68020 microprocessor. It supports up to 1024 I/O points per scanner and provides memory configurations of 192KW or 34
Call
4.9
5130-RM1
This module supports a programming interface for the PLC-5/250 processor and connects with two DH/DH+ communication ports as well as one RS-232/RS-422 port. It features an operational temperature rang
In Stock Ships Today
5.0
5250-MLP1
This logic board features a memory capacity of 192K words and provides input interrupt capabilities at either 12 or 24 volts DC. It integrates communication through the DF1 protocol and is equipped wi
Available
4.7
5130-KA
With a total of three channels, the 5130-KA supports data transmission rates of 57.6 Kbits per second for DH links and offers flexibility for DH+ links at rates of 57.6, 115.2, or 230.4 Kbits. This de
In Stock Ships Today
4.7
5130-RM2
Operating at a voltage range of 3V DC at 3 Amps, 12V DC at 0.07 Amps, and -12V DC at 0.05 Amps, this module supports battery backup and includes LED indicators for status monitoring. It features conne
In Stock Ships Today
4.6
Showing 1-10 of
51
results
About Pyramid Integrator
The Pyramid Integrator series is a series of Allen-Bradley programmable logic controllers. The Pyramid Integrator series features up to 49 entries. The Allen-Bradley modular form programmable logic controllers consist of a CPU module with a separate I/O module. The Pyramid Integrator series features chassis-based units supporting up to 8 modules per chassis. The components under the Pyramid Integrator series provide the users with an added functionality on the control systems. The Allen-Bradley Pyramid Integrators are compatible with the logic processor daughterboard pyramid integrators. The Pyramid Integrators feature control functions from different sources and they support the ladder-logic programming. The units are programmed to source operational data from similar Pyramid Integrators, so long as these fall under the same chassis. For the Allen-Bradley Pyramid Integrators, a single chassis supports up to 8 modules.
When installing the Pyramid Integrators, ensure that the power is switched off, and check whether there is sufficient room for the specific module being installed. Before powering the application back up, it is important that the users verify that the module sits firmly on the backplane of the chassis. The module should then be secured in place, to ensure that there is no movement at all. When mounting an Allen-Bradley Pyramid Integrator, the users must ensure that they are using the mounting manual for that specific unit. Further, they must have the PI components, tools, and supplies that are required for installing the unit. The components should be mounted on the rack. Check to ensure that the rack or the panel-mounting procedure is followed correctly to ensure optimal performance.