1745-E104 - In Stock | Allen Bradley PLC SLC 100

1745-E104

Rated 3.8 with 19 reviews

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.


credit cards accepted
better business bureau

1745-E104

Revisions: Ser A Ser B 
Description: The 1745-E104 module is manufactured by Allen-Bradley/Rockwell Automation for operation with programmable logic controllers or PLCs from the Allen-Bradley SLC 100 series. It is manufactured as an expansion module that can be used to add 6 outputs and 10 inputs to a PLC. The line terminals in the 1745-E104 expansion module are all color-coded, which makes them easy to identify. It can be mounted easily and securely on a DIN Rail and it connects to the PLC that it is working with through a ribbon cable that should be kept as short as possible to reduce the chances of signal loss or interference. The input voltage rating of the 1745-E104 expansion module is 10 to 30 Volts AC at 50 to 60 Hertz.
In Stock Ships Today
Request a quote for 1745-E104

Description: The 1745-E104 module is manufactured by Allen-Bradley/Rockwell Automation for operation with programmable logic controllers or PLCs from the Allen-Bradley SLC 100 series. It is manufactured as an expansion module that can be used to add 6 outputs and 10 inputs to a PLC. The line terminals in the 1745-E104 expansion module are all color-coded, which makes them easy to identify. It can be mounted easily and securely on a DIN Rail and it connects to the PLC that it is working with through a ribbon cable that should be kept as short as possible to reduce the chances of signal loss or interference. The input voltage rating of the 1745-E104 expansion module is 10 to 30 Volts AC at 50 to 60 Hertz.

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

disclaimer
credit cards
better business bureau
Revisions: Ser A Ser B 

Warranty: 1 year DO Supply Warranty Included
Shipping: Worldwide shipping via UPS, DHL, and TNT
Repairs: We offer repair service for the 1745-E104.
Exchange: Exchange credit for your defective unit available.
Conditions: We sell preowned surplus and refurbished parts.

To speak to a sales representative for pricing & lead time:


Rated 3.8 with 19 reviews

    Technical Specifications for 1745-E104

ManufacturerRockwell Automation
BrandAllen-Bradley
Output Termials6
Input Terminals10
Input TypeDigital
Input Power10-30 V
Comm Cable1745-c2
ManufacturerRockwell Automation
BrandAllen-Bradley
Output Termials6
Input Terminals10
Input TypeDigital
Input Power10-30 V
Comm Cable1745-c2
s

About 1745-E104

The SLC 1745-E104 expansion unit by Allen-Bradley is compatible with SLC 100 processor/100 processor units for a variety of applications. Running on 10-30V AC at 50-60Hz, the 1745-E104 can expand the number of main circuitry connections in a device up to a maximum number of 112 and the color-coded line terminals help in identification. Assigning addresses to the I/O combinations is easy when you match the address blocks to the SLC 100/150 units. There are also 5 diagnostic indicators for external/internal warnings in the expansion unit. A ribbon cable acts as an interfacing cable between the expansion and processor units.



Use the correct length of interconnecting cables as longer cables tend to result in signal loss. There are various indicators for process identification, e.g. a green LED for DC power and red LEDs for input/outputs. The installation is easy and maintenance requires little effort. There are provisions for easy installation and maintenance using screw mounting and DIN rail mounting.  



The 1745-E104 is connected to a processor unit using the ribbon cable. There are 3 available configurations in this series: basic, relay, and an analog input unit. Make sure that the wires are routed to minimize electrical noise effects. The 7 address blocks from the 112 I/O configurations are compatible with the expansion unit providing easy access to the terminal identification. Make sure all the modules within the expansion unit are having the constant power supply.



Technical Description of 1745-E104

1745-E104 by Allen Bradley is part of the SLC-100 series of PLCs. This part features 10 input terminals and 6 output terminals, and an input power range of 10-30 V

Repair Services for 1745-E104

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 1745-E104. All of our repairs come with a 1 Year Warranty. Please contact us for additional information about our repair process.

Revisions for 1745-E104

Please refer to the manual for more information about the 1745-E104 such as the wiring diagrams, data sheets and migration or obsolescence details.

Revision Part # Also Known as Availability
1745-E104 Ser A
1745-E104/A, Series A, Rev A Request Quote
1745-E104 Ser B
1745-E104/B, Series B, Rev B Request Quote
Common misspellings:
  • l745-E104
  • 17A5-E104
  • 1745-El04
  • 1745-E1o4
  • 1745-E10A
  • 1745E104

Dimensions For 1745-E104

Size
Input Type
Panel Cutout Height in mm
Panel Cutout Width in mm
Terminal Height in mm
Terminal Width in mm
Terminal Overall Depth in mm
Terminal Mounted Depth in mm

Dimensions For 1745-E104

Resolutions For 1745-E104

About

Technical Specifications for 1745-E104

ManufacturerRockwell Automation
BrandAllen-Bradley
Output Termials6
Input Terminals10
Input TypeDigital
Input Power10-30 V
Comm Cable1745-c2
ManufacturerRockwell Automation
BrandAllen-Bradley
Output Termials6
Input Terminals10
Input TypeDigital
Input Power10-30 V
Comm Cable1745-c2

About 1745-E104

The SLC 1745-E104 expansion unit by Allen-Bradley is compatible with SLC 100 processor/100 processor units for a variety of applications. Running on 10-30V AC at 50-60Hz, the 1745-E104 can expand the number of main circuitry connections in a device up to a maximum number of 112 and the color-coded line terminals help in identification. Assigning addresses to the I/O combinations is easy when you match the address blocks to the SLC 100/150 units. There are also 5 diagnostic indicators for external/internal warnings in the expansion unit. A ribbon cable acts as an interfacing cable between the expansion and processor units.



Use the correct length of interconnecting cables as longer cables tend to result in signal loss. There are various indicators for process identification, e.g. a green LED for DC power and red LEDs for input/outputs. The installation is easy and maintenance requires little effort. There are provisions for easy installation and maintenance using screw mounting and DIN rail mounting.  



The 1745-E104 is connected to a processor unit using the ribbon cable. There are 3 available configurations in this series: basic, relay, and an analog input unit. Make sure that the wires are routed to minimize electrical noise effects. The 7 address blocks from the 112 I/O configurations are compatible with the expansion unit providing easy access to the terminal identification. Make sure all the modules within the expansion unit are having the constant power supply.



Technical Description of 1745-E104

1745-E104 by Allen Bradley is part of the SLC-100 series of PLCs. This part features 10 input terminals and 6 output terminals, and an input power range of 10-30 V
Repairs
Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 1745-E104. All of our repairs come with a 1 Year Warranty. Please contact us for additional information about our repair process.

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 1745-E104. All of our repairs come with a 1 Year Warranty. Please contact us for additional information about our repair process.

Revisions

Please refer to the manual for more information about the 1745-E104 such as the wiring diagrams, data sheets and migration or obsolescence details.

Revision Part # Also Known as Availability
1745-E104 Ser A
1745-E104/A, Series A, Rev A Request Quote
1745-E104 Ser B
1745-E104/B, Series B, Rev B Request Quote

Common misspellings:
  • l745-E104
  • 17A5-E104
  • 1745-El04
  • 1745-E1o4
  • 1745-E10A
  • 1745E104
PDF