1745-E157

Rated 4.5 with 23 reviews

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.


credit cards accepted
better business bureau

1745-E157

Revisions: Ser A 
Description: The 1745-E157 expansion module has been designed and manufactured as part of the SLC 150 product series by Allen-Bradley/Rockwell Automation. It has 12 output terminals which are current sinking transistor outputs or NPN outputs. The 1745-E157 expansion module also has 20 digital inputs. Its memory is CMOS RAM. The 1745-E157 expansion module supports 8 Amps of nominal current and 2000 Volts of electrical isolation between the output contacts.
Available Now
Request a quote for 1745-E157

Description: The 1745-E157 expansion module has been designed and manufactured as part of the SLC 150 product series by Allen-Bradley/Rockwell Automation. It has 12 output terminals which are current sinking transistor outputs or NPN outputs. The 1745-E157 expansion module also has 20 digital inputs. Its memory is CMOS RAM. The 1745-E157 expansion module supports 8 Amps of nominal current and 2000 Volts of electrical isolation between the output contacts.

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

disclaimer
credit cards
better business bureau
Revisions: Ser A 

Warranty: 1 year DO Supply Warranty Included
Shipping: Worldwide shipping via UPS, DHL, and TNT
Repairs: We offer repair service for the 1745-E157.
Exchange: Exchange credit for your defective unit available.
Conditions: We sell preowned surplus and refurbished parts.

To speak to a sales representative for pricing & lead time:


Rated 4.5 with 23 reviews

    Technical Specifications for 1745-E157

ManufacturerRockwell Automation
BrandAllen-Bradley
Output Terminals12
Input Terminals20
Input TypeDigital
Input Power10 to 30 Volts DC
Comm Cable1745-c3
memoryCMOS RAM
ManufacturerRockwell Automation
BrandAllen-Bradley
Output Terminals12
Input Terminals20
Input TypeDigital
Input Power10 to 30 Volts DC
Comm Cable1745-c3
memoryCMOS RAM
s

About 1745-E157

The Allen-Bradley 1745-E157 SLC 150 is an I/O module in the SLC 150 I/O module series with 20 current sourcing optically-isolated 10 to 30 Volts DC inputs control with red LED indicators numbered A1-A10 and B1-B10. When used in conjunction with a processor unit, the 1745-E157 can achieve a maximum expansion of up to 112 I/O points. It also has 12 transistor-based and hard contact outputs with 12 red LED indicators. Its hard contact output has a contactor with 10 to 125 Volts DC and a current of 2.5 Amps rating at a resistance of 20 milliohms. The 1745-E157 has an electrical isolation of 2000 Volts tested between output contacts in control logic and uses the Bussman 3 Amps slow blow fuse for circuit protection.





The 1745-E157’s transistor base output has a voltage rating of 10 to 50 Volts DC and a current of 1 Amp which both gradually de-rate at 60 degrees Celsius to 0.5 Amps. It has a surge current of 2 Amps for 20 milliseconds which is repeatable every 2 seconds and a maximum load of 1.0mA at a current leakage of 0.1mA. The base outputs are optically-isolated from a voltage of 1500 Volts tested between control logic and output voltage, and it offers circuit protection through its San-OSOC ST4-2A standard fuse type. The 1745-E157 has a voltage rating between 10 and 30 Volts DC, with an OFF state voltage of 4 Volts at 1.0mA. It inputs also has an ON and OFF filter delay time of 4 to 8 milliseconds. The 1745-E157 has an input nominal current of 8.0 Amps and has an electrical-optical isolation voltage of 1500 Volts between the input voltage and control logic.



Technical Description of 1745-E157

1745-E157 by allen-bradley is part of the slc-150 series of PLCs. This part features 20 input terminals and 12 output terminals, and an input power range of 10-30 V

Repair Services for 1745-E157

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 1745-LP157. All of our repairs come with a 1 Year Warranty. Please contact us for additional information about our repair process.

Revisions for 1745-E157

Please refer to the manual for more information about the 1745-E157 such as the wiring diagrams, data sheets and migration or obsolescence details.

Revision Part # Also Known as Availability
1745-E157 Ser A
1745-E157/A, Series A, Rev A Request Quote
Common misspellings:
  • l745-E157
  • 17A5-E157
  • 1745-El57
  • 1745E157

Dimensions For 1745-E157

Size
Input Type
Panel Cutout Height in mm
Panel Cutout Width in mm
Terminal Height in mm
Terminal Width in mm
Terminal Overall Depth in mm
Terminal Mounted Depth in mm

Dimensions For 1745-E157

Resolutions For 1745-E157

About

Technical Specifications for 1745-E157

ManufacturerRockwell Automation
BrandAllen-Bradley
Output Terminals12
Input Terminals20
Input TypeDigital
Input Power10 to 30 Volts DC
Comm Cable1745-c3
memoryCMOS RAM
ManufacturerRockwell Automation
BrandAllen-Bradley
Output Terminals12
Input Terminals20
Input TypeDigital
Input Power10 to 30 Volts DC
Comm Cable1745-c3
memoryCMOS RAM

About 1745-E157

The Allen-Bradley 1745-E157 SLC 150 is an I/O module in the SLC 150 I/O module series with 20 current sourcing optically-isolated 10 to 30 Volts DC inputs control with red LED indicators numbered A1-A10 and B1-B10. When used in conjunction with a processor unit, the 1745-E157 can achieve a maximum expansion of up to 112 I/O points. It also has 12 transistor-based and hard contact outputs with 12 red LED indicators. Its hard contact output has a contactor with 10 to 125 Volts DC and a current of 2.5 Amps rating at a resistance of 20 milliohms. The 1745-E157 has an electrical isolation of 2000 Volts tested between output contacts in control logic and uses the Bussman 3 Amps slow blow fuse for circuit protection.





The 1745-E157’s transistor base output has a voltage rating of 10 to 50 Volts DC and a current of 1 Amp which both gradually de-rate at 60 degrees Celsius to 0.5 Amps. It has a surge current of 2 Amps for 20 milliseconds which is repeatable every 2 seconds and a maximum load of 1.0mA at a current leakage of 0.1mA. The base outputs are optically-isolated from a voltage of 1500 Volts tested between control logic and output voltage, and it offers circuit protection through its San-OSOC ST4-2A standard fuse type. The 1745-E157 has a voltage rating between 10 and 30 Volts DC, with an OFF state voltage of 4 Volts at 1.0mA. It inputs also has an ON and OFF filter delay time of 4 to 8 milliseconds. The 1745-E157 has an input nominal current of 8.0 Amps and has an electrical-optical isolation voltage of 1500 Volts between the input voltage and control logic.



Technical Description of 1745-E157

1745-E157 by allen-bradley is part of the slc-150 series of PLCs. This part features 20 input terminals and 12 output terminals, and an input power range of 10-30 V
Repairs
Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 1745-LP157. All of our repairs come with a 1 Year Warranty. Please contact us for additional information about our repair process.

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 1745-LP157. All of our repairs come with a 1 Year Warranty. Please contact us for additional information about our repair process.

Revisions

Please refer to the manual for more information about the 1745-E157 such as the wiring diagrams, data sheets and migration or obsolescence details.

Revision Part # Also Known as Availability
1745-E157 Ser A
1745-E157/A, Series A, Rev A Request Quote

Common misspellings:
  • l745-E157
  • 17A5-E157
  • 1745-El57
  • 1745E157
PDF