1746-IM4 - In Stock | Allen Bradley PLC SLC 500

1746-IM4

Rated 4.5 with 16 reviews

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.


credit cards accepted
better business bureau

1746-IM4

Revisions: Ser A 
Description: The Allen-Bradley 1746-IM4 is a SLC 500 Digital AC Input Module. This Digital AC Input Module has a Voltage Range of 170-265 Volts AC and 4 Inputs with a Backplane Current (5 Volts DC) of 35 milliamps.
In Stock Ships Today
Request a quote for 1746-IM4

Description: The Allen-Bradley 1746-IM4 is a SLC 500 Digital AC Input Module. This Digital AC Input Module has a Voltage Range of 170-265 Volts AC and 4 Inputs with a Backplane Current (5 Volts DC) of 35 milliamps.

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

disclaimer
credit cards
better business bureau
Revisions: Ser A 

Warranty: 1 year DO Supply Warranty Included
Shipping: Worldwide shipping via UPS, DHL, and TNT
Repairs: We offer repair service for the 1746-IM4.
Exchange: Exchange credit for your defective unit available.
Conditions: We sell preowned surplus and refurbished parts.

To speak to a sales representative for pricing & lead time:


Rated 4.5 with 16 reviews

    Technical Specifications for 1746-IM4

ManufacturerRockwell Automation
BrandAllen-Bradley
Part Number/Catalog No.1746-IM4
SeriesSLC 500
Module TypeDigital AC Input Module
Voltage Range170-265 Volts AC
Inputs4
Backplane Current (5 Volts DC)35 milliamps
Signal delay35 or 45 milliseconds
Off State Current2 milliamps
ApplicationsGeneral Purpose 125 Volts DC Inputs
I/O Connection1746-HT and 1746-HCA
Step Response100 milliseconds in, 2.5 milliseconds out
ManufacturerRockwell Automation
BrandAllen-Bradley
Part Number/Catalog No.1746-IM4
SeriesSLC 500
Module TypeDigital AC Input Module
Voltage Range170-265 Volts AC
Inputs4
Backplane Current (5 Volts DC)35 milliamps
Signal delay35 or 45 milliseconds
Off State Current2 milliamps
ApplicationsGeneral Purpose 125 Volts DC Inputs
I/O Connection1746-HT and 1746-HCA
Step Response100 milliseconds in, 2.5 milliseconds out
s

About 1746-IM4

The 1746-IM4 SLC 500 AC Input Module by Allen-Bradley is an AC input module installed in the 1746 I/O chassis and it has four 200-240V AC inputs. It also has an operational AC voltage range between 170 and 265V AC at 47-63 Hz line frequency and it draws a Chassis backplane current of 0.035A at 5.0V DC and of 0.0A at 24V DC. The inputs signal in the module has a maximum circuit status transmission delay time of 35ms for ON condition and one of 45ms for OFF condition. In its OFF state, the 1746-IM4 module has a maximum 50V AC voltage loss in its circuit and the maximum leakage current in this state is 2.0mA. The 1746-IM4 has a nominal input current of 12mA at a nominal voltage of 240V AC and the maximum current surge on each output point is 1.6A with a 500µsec surge duration. 

The maximum wattage on each point of the 1746-IM4 module is 0.35W and the overall power dissipation in the module is 1.6W. It offers circuit isolation tested at 1500V AC between the backplane and the I/O. The 1746-IM4’s operating temperature ranges between 0 and 60 °C (32 and 140 °F) at 5-95% non-condensing humidity, and it is stored at a temperature range between -40 and 85 °C (-40 and 185 °F). It offers NEMA ICS 2-230 standard noise immunity and is UL-A196, CSA, and C-UL-certified for operation in hazardous environments. The 1746-IM4 is built to withstand an operational shock of 30G and a vibration of 2.5G at a 57-500 Hertz frequency.



Repair Services for 1746-IM4

Type Lead Time Price Action
Repair Service 2-4 weeks $297cartAdd to Cart

Our highly skilled technicians can repair your SLC 500 1746-IM4. All of our repairs come with a 1 Year Warranty. Please contact us for additional information.

Revisions for 1746-IM4

Please refer to the manual for more information about the 1746-IM4 such as the wiring diagrams, data sheets and migration or obsolescence details.

Revision Part # Also Known as Availability
1746-IM4 Ser A
1746-IM4/A, Series A, Rev A Request Quote
Common misspellings:
  • l746-IM4
  • 17A6-IM4
  • 1746-IMA
  • 1746IM4
  • 1747-IM4

Reviews for 1746-IM4

I/O Rating

"The lowest amount of I/O offered. Depending on the application, this could still be the perfect amount. " -DO Supply Tech

Voltage Range

"Not the predominantly used range, but useful in processes that require a unique power source. " -DO Supply Tech

Fused

"This module is not protected by a fuse that is in line with the power source. " -DO Supply Tech

Dimensions For 1746-IM4

Size
Input Type
Panel Cutout Height in mm
Panel Cutout Width in mm
Terminal Height in mm
Terminal Width in mm
Terminal Overall Depth in mm
Terminal Mounted Depth in mm

Dimensions For 1746-IM4

Resolutions For 1746-IM4

About

Technical Specifications for 1746-IM4

ManufacturerRockwell Automation
BrandAllen-Bradley
Part Number/Catalog No.1746-IM4
SeriesSLC 500
Module TypeDigital AC Input Module
Voltage Range170-265 Volts AC
Inputs4
Backplane Current (5 Volts DC)35 milliamps
Signal delay35 or 45 milliseconds
Off State Current2 milliamps
ApplicationsGeneral Purpose 125 Volts DC Inputs
I/O Connection1746-HT and 1746-HCA
Step Response100 milliseconds in, 2.5 milliseconds out
ManufacturerRockwell Automation
BrandAllen-Bradley
Part Number/Catalog No.1746-IM4
SeriesSLC 500
Module TypeDigital AC Input Module
Voltage Range170-265 Volts AC
Inputs4
Backplane Current (5 Volts DC)35 milliamps
Signal delay35 or 45 milliseconds
Off State Current2 milliamps
ApplicationsGeneral Purpose 125 Volts DC Inputs
I/O Connection1746-HT and 1746-HCA
Step Response100 milliseconds in, 2.5 milliseconds out

About 1746-IM4

The 1746-IM4 SLC 500 AC Input Module by Allen-Bradley is an AC input module installed in the 1746 I/O chassis and it has four 200-240V AC inputs. It also has an operational AC voltage range between 170 and 265V AC at 47-63 Hz line frequency and it draws a Chassis backplane current of 0.035A at 5.0V DC and of 0.0A at 24V DC. The inputs signal in the module has a maximum circuit status transmission delay time of 35ms for ON condition and one of 45ms for OFF condition. In its OFF state, the 1746-IM4 module has a maximum 50V AC voltage loss in its circuit and the maximum leakage current in this state is 2.0mA. The 1746-IM4 has a nominal input current of 12mA at a nominal voltage of 240V AC and the maximum current surge on each output point is 1.6A with a 500µsec surge duration. 

The maximum wattage on each point of the 1746-IM4 module is 0.35W and the overall power dissipation in the module is 1.6W. It offers circuit isolation tested at 1500V AC between the backplane and the I/O. The 1746-IM4’s operating temperature ranges between 0 and 60 °C (32 and 140 °F) at 5-95% non-condensing humidity, and it is stored at a temperature range between -40 and 85 °C (-40 and 185 °F). It offers NEMA ICS 2-230 standard noise immunity and is UL-A196, CSA, and C-UL-certified for operation in hazardous environments. The 1746-IM4 is built to withstand an operational shock of 30G and a vibration of 2.5G at a 57-500 Hertz frequency.



Repairs
Type Lead Time Price Action
Repair Service 2-4 weeks $297cartAdd to Cart

Our highly skilled technicians can repair your SLC 500 1746-IM4. All of our repairs come with a 1 Year Warranty. Please contact us for additional information.

Type Lead Time Price Action
Repair Service 2-4 weeks $297cartAdd to Cart

Our highly skilled technicians can repair your SLC 500 1746-IM4. All of our repairs come with a 1 Year Warranty. Please contact us for additional information.

Revisions

Please refer to the manual for more information about the 1746-IM4 such as the wiring diagrams, data sheets and migration or obsolescence details.

Revision Part # Also Known as Availability
1746-IM4 Ser A
1746-IM4/A, Series A, Rev A Request Quote

Common misspellings:
  • l746-IM4
  • 17A6-IM4
  • 1746-IMA
  • 1746IM4
PDF
Reviews

Reviews for 1746-IM4

I/O Rating

"The lowest amount of I/O offered. Depending on the application, this could still be the perfect amount. " -DO Supply Tech

Voltage Range

"Not the predominantly used range, but useful in processes that require a unique power source. " -DO Supply Tech

Fused

"This module is not protected by a fuse that is in line with the power source. " -DO Supply Tech