1746-IM8 - In Stock | Allen Bradley PLC SLC 500

1746-IM8

Rated 5 with 8 reviews

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.


credit cards accepted
better business bureau

1746-IM8

Revisions: Ser A 
Description: The Allen-Bradley/Rockwell Automation 1746-IM8 module is an input module that comes with 8 channels. It has been designed and manufactured as part of the Allen-Bradley SLC 500 series of I/O modules. The 1746-IM8 input module can operate in some hazardous environments, but it must be installed properly and used carefully in these environments to avoid electric shocks, fires, and explosions. Its voltage category is 200/240 Volts AC. The 1746-IM8 input module operates with 12 milliamps of input current at 240 Volts AC nominal voltage and its maximum inrush current is 1.8 Amps.
In Stock Ships Today
Request a quote for 1746-IM8

Description: The Allen-Bradley/Rockwell Automation 1746-IM8 module is an input module that comes with 8 channels. It has been designed and manufactured as part of the Allen-Bradley SLC 500 series of I/O modules. The 1746-IM8 input module can operate in some hazardous environments, but it must be installed properly and used carefully in these environments to avoid electric shocks, fires, and explosions. Its voltage category is 200/240 Volts AC. The 1746-IM8 input module operates with 12 milliamps of input current at 240 Volts AC nominal voltage and its maximum inrush current is 1.8 Amps.

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

disclaimer
credit cards
better business bureau
Revisions: Ser A 

Warranty: 1 year DO Supply Warranty Included
Shipping: Worldwide shipping via UPS, DHL, and TNT
Repairs: We offer repair service for the 1746-IM8.
Exchange: Exchange credit for your defective unit available.
Conditions: We sell preowned surplus and refurbished parts.

To speak to a sales representative for pricing & lead time:


Rated 5 with 8 reviews

    Technical Specifications for 1746-IM8

ManufacturerRockwell Automation
BrandAllen-Bradley
Part Number/Catalog No.1746-IM8
SeriesSLC 500
Module TypeDigital AC Input Module
Voltage Range170-265 Volts AC
Inputs8
Backplane Current (5 Volts DC)50 milliamps
Signal delay35 or 45 milliseconds
Off State Current2 milliamps
ApplicationsGeneral Purpose 125 Volts DC Inputs
I/O Connection1746-HT and 1746-HCA
Step Response100 milliseconds in, 2.5 milliseconds out
ManufacturerRockwell Automation
BrandAllen-Bradley
Part Number/Catalog No.1746-IM8
SeriesSLC 500
Module TypeDigital AC Input Module
Voltage Range170-265 Volts AC
Inputs8
Backplane Current (5 Volts DC)50 milliamps
Signal delay35 or 45 milliseconds
Off State Current2 milliamps
ApplicationsGeneral Purpose 125 Volts DC Inputs
I/O Connection1746-HT and 1746-HCA
Step Response100 milliseconds in, 2.5 milliseconds out
s

About 1746-IM8

The Allen Bradley SLC 500 Digital Input Module 1746-IM8 comes with 8 channels. This module has voltage category of 200/240 Volts AC. It operates in temperatures between -25 and 60 degrees Celsius (-13 to 140 degrees Fahrenheit), and its non-operating temperatures range from -40 to 85 degrees Celsius (-40 to 185 degrees Fahrenheit). The relative humidity of this unit lies between 5% and 95% without condensation. It's operating vibration is approximately 1.0 g at 5 to 2000 Hertz; it has a total heat dissipation of 3.1 Watt, with 0.35 Watts per point and a 30 g operating shock.



The 1746-IM8 has an operating range of 170 to 265 Volts AC at 47 to 63 Hertz. The backplane current at 5 Volts of this module is 50 mA, while the same current at 24 Volts is 0 mA. The 1746-IM8 is supplied as open type equipment, intended for use in industrial environments no more than Pollution 2 (as defined in EN / IEC0664-1) when applied in a Zone 2 environment. The enclosure should be accessible only by means of the appliance. Keep equipment connected at all times until power is cut and the area is secured.



 



Technical Description of 1746-IM8

The Allen-Bradley 1746-IM8 is a SLC 500 Digital AC Input Module. This Digital AC Input Module has a Voltage Range of 170-265 Volts AC and 8 Inputs with a Backplane Current (5 Volts DC) of 50 milliamps.

Repair Services for 1746-IM8

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your SLC 500 1746-IM8. All of our repairs come with a 1 Year Warranty. Please contact us for additional information.

Revisions for 1746-IM8

Please refer to the manual for more information about the 1746-IM8 such as the wiring diagrams, data sheets and migration or obsolescence details.

Revision Part # Also Known as Availability
1746-IM8 Ser A
1746-IM8/A, Series A, Rev A Request Quote
Common misspellings:
  • l746-IM8
  • 17A6-IM8
  • 1746-IMb
  • 1746IM8
  • 1747-IM8

Reviews for 1746-IM8

I/O Rating

"The second highest amount of I/O offered for this type of discrete module. " -DO Supply Tech

Voltage Range

"Not the predominantly used range, but useful in processes that require a unique power source. " -DO Supply Tech

Fused

"This module is not protected by a fuse that is in line with the power source. " -DO Supply Tech

Dimensions For 1746-IM8

Size
Input Type
Panel Cutout Height in mm
Panel Cutout Width in mm
Terminal Height in mm
Terminal Width in mm
Terminal Overall Depth in mm
Terminal Mounted Depth in mm

Dimensions For 1746-IM8

Resolutions For 1746-IM8

About

Technical Specifications for 1746-IM8

ManufacturerRockwell Automation
BrandAllen-Bradley
Part Number/Catalog No.1746-IM8
SeriesSLC 500
Module TypeDigital AC Input Module
Voltage Range170-265 Volts AC
Inputs8
Backplane Current (5 Volts DC)50 milliamps
Signal delay35 or 45 milliseconds
Off State Current2 milliamps
ApplicationsGeneral Purpose 125 Volts DC Inputs
I/O Connection1746-HT and 1746-HCA
Step Response100 milliseconds in, 2.5 milliseconds out
ManufacturerRockwell Automation
BrandAllen-Bradley
Part Number/Catalog No.1746-IM8
SeriesSLC 500
Module TypeDigital AC Input Module
Voltage Range170-265 Volts AC
Inputs8
Backplane Current (5 Volts DC)50 milliamps
Signal delay35 or 45 milliseconds
Off State Current2 milliamps
ApplicationsGeneral Purpose 125 Volts DC Inputs
I/O Connection1746-HT and 1746-HCA
Step Response100 milliseconds in, 2.5 milliseconds out

About 1746-IM8

The Allen Bradley SLC 500 Digital Input Module 1746-IM8 comes with 8 channels. This module has voltage category of 200/240 Volts AC. It operates in temperatures between -25 and 60 degrees Celsius (-13 to 140 degrees Fahrenheit), and its non-operating temperatures range from -40 to 85 degrees Celsius (-40 to 185 degrees Fahrenheit). The relative humidity of this unit lies between 5% and 95% without condensation. It's operating vibration is approximately 1.0 g at 5 to 2000 Hertz; it has a total heat dissipation of 3.1 Watt, with 0.35 Watts per point and a 30 g operating shock.



The 1746-IM8 has an operating range of 170 to 265 Volts AC at 47 to 63 Hertz. The backplane current at 5 Volts of this module is 50 mA, while the same current at 24 Volts is 0 mA. The 1746-IM8 is supplied as open type equipment, intended for use in industrial environments no more than Pollution 2 (as defined in EN / IEC0664-1) when applied in a Zone 2 environment. The enclosure should be accessible only by means of the appliance. Keep equipment connected at all times until power is cut and the area is secured.



 



Technical Description of 1746-IM8

The Allen-Bradley 1746-IM8 is a SLC 500 Digital AC Input Module. This Digital AC Input Module has a Voltage Range of 170-265 Volts AC and 8 Inputs with a Backplane Current (5 Volts DC) of 50 milliamps.
Repairs
Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your SLC 500 1746-IM8. All of our repairs come with a 1 Year Warranty. Please contact us for additional information.

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your SLC 500 1746-IM8. All of our repairs come with a 1 Year Warranty. Please contact us for additional information.

Revisions

Please refer to the manual for more information about the 1746-IM8 such as the wiring diagrams, data sheets and migration or obsolescence details.

Revision Part # Also Known as Availability
1746-IM8 Ser A
1746-IM8/A, Series A, Rev A Request Quote

Common misspellings:
  • l746-IM8
  • 17A6-IM8
  • 1746-IMb
  • 1746IM8
PDF
Reviews

Reviews for 1746-IM8

I/O Rating

"The second highest amount of I/O offered for this type of discrete module. " -DO Supply Tech

Voltage Range

"Not the predominantly used range, but useful in processes that require a unique power source. " -DO Supply Tech

Fused

"This module is not protected by a fuse that is in line with the power source. " -DO Supply Tech