Free UPS Ground on All Orders!
+1 (919) 205-4392
Allen Bradley SLC 500 1746-OA8

Product image is representative; revision or series may vary. Contact us to request a specific version.

1746-OA8

|

The Allen-Bradley 1746-OA8 is an SLC 500 discrete AC output module. This module has Eight (8) output channels in Two (2) groups of Four (4) channels each. It delivers an output voltage range of 85-264VAC with frequency of 47-63 Hz. It has a backplane current of 185 mA @ 5VDC.

In Stock
Ships from Raleigh, NC
2 Year DO Supply Warranty
Not an Authorized Distributor: DO Supply is not an authorized distributor for listed manufacturers or tradenames and therefore the manufacturer's warranty does not apply. All of our products come with DO Supply's 2-year warranty.
Learn more
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Technical specifications for 1746-OA8

ManufacturerAllen Bradley
CategoryPLCs
Product LineSLC 500
Part Number1746-OA8
UPC662073521334
Weight0.44 lbs (0.20 kg)
Module TypeDiscrete AC output module
No. of groups2
No. of channels per group4
Nom Output Voltage120 / 240 VAC
Output Voltage Range85-264 VAC
Backplane current consumption185 mA
ON Signal delay, max. resistive load1 ms
OFF Signal delay, max. resistive load11 ms
Continuous current per point1.00 A at 30 °C (86 °F); 0.5 A at 60 °C (140 °F)
Continuous current per module8.0 A at 30 °C (86 °F); 4.0 A at 60 °C (140 °F)
On-state voltage drop, max1.5V at 1.0 A
Surge current per point10 A for 25 ms
Voltage Range85-265 Volts AC
Outputs8
Current/Output at 30 Celsius1 amp
Current/Output at 60 Celsius0.5 amp
Backplane Current (5 Volts)185 milliamps
Current/Module (30 Celsius)8 amps
ApplicationsGeneral Purpose
Step Response60 milliseconds in, 2.5 milliseconds out

The Allen-Bradley 1746-OA8 is an SLC 500 AC output module. This module is part of discrete output modules, used to energize electrical loads that operate at an operating voltage range of 85-264 VCA with frequency of 47-63 Hz. The module’s nominal output voltages are 120VAC and 240VAC and occupies a single slot of the 1746 chassis.

Each channel of the 1746-OA8 delivers a continuous output current of 1.0 A @ 30 °C (86 °F) or 0.50 A @ 60 °C (140 °F) while the maximum continuous output current per module is 8.0 A @ 30 °C (86 °F) and 4.0 A @ 60 °C (140 °F). Additionally, each channel has an ON signal delay of 1 ms for resistive load and maximum OFF delay signal of 11 ms for resistive load as well.

The 1746-OA8 draws backplane current amounting to 185 mA @ 5VDC with ON state output voltage drop of 1.50V @ 1.0 A. The module’s minimum load current is 10 mA with maximum OFF state leakage output current of 2 mA. The module’s maximum surge current per point is 10 A for 25 ms.

The 1746-OA8 fits to any available slot of the 1746 chassis except the first slot which is reserve for the SLC 500 processor.

For installation, the module must be attached to the chassis when power is not actively supplied as this module does not support Removal and Insertion Under Power (RIUP).

The 1746-OA8 has a maximum leakage current of 2mA in its OFF state and the minimum current load on each output point is 10mA. The maximum current on each output point is 1A which falls to 0.5A at 60 °C and the aggregate current on the 1746-OA8 module is 8A but it can fall to 4A at 60 °C. It has a drop voltage of 1.50V at 1A in its OFF state and the module has an output current surge of 10A for 25ms. The 1746-OA8’s factory-designated operational temperature falls between 0 and 60 °C (32 and 140 °F) and it must be used in 5-95% non-condensing relative humidity and stored at a temperature between 40 and 85 °C (-40 and 185 °F). It is built to withstand an operational vibration of 2.5G at 57-2000 Hertz and it can sustain a shock rating of 30G. The 1746-OA8 features NEMA standard ICS 2-230 Noise Immunity and is UL and CSA-certified.

Revision Part #Also known as
1746-OA8 Ser A1746-OA8/A, Series A, Rev A
1746-OA8 Ser B1746-OA8/B, Series B, Rev B
Don't see your particular revision? Contact us now.