1746-OW4 - In Stock | Allen Bradley PLC SLC 500

1746-OW4

Rated 4.6 with 7 reviews

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.


credit cards accepted
better business bureau

1746-OW4

Revisions: Ser A 
Description: The Allen-Bradley 1746-OW4 is a SLC 500 Digital Contact Output Module. This Digital Contact Output Module has an Operating Voltage of 5-265 Volt AC or 5-125 Volts DC and 4 N.O. Relay Contact Outputs. It is intended for Relay Contact Outputs Applications.
In Stock Ships Today
Request a quote for 1746-OW4

Description: The Allen-Bradley 1746-OW4 is a SLC 500 Digital Contact Output Module. This Digital Contact Output Module has an Operating Voltage of 5-265 Volt AC or 5-125 Volts DC and 4 N.O. Relay Contact Outputs. It is intended for Relay Contact Outputs Applications.

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

disclaimer
credit cards
better business bureau
Revisions: Ser A 

Warranty: 1 year DO Supply Warranty Included
Shipping: Worldwide shipping via UPS, DHL, and TNT
Repairs: We offer repair service for the 1746-OW4.
Exchange: Exchange credit for your defective unit available.
Conditions: We sell preowned surplus and refurbished parts.

To speak to a sales representative for pricing & lead time:


Rated 4.6 with 7 reviews

    Technical Specifications for 1746-OW4

ManufacturerRockwell Automation
BrandAllen-Bradley
Part Number/Catalog No.1746-OW4
SeriesSLC 500
Module TypeDigital Contact Output Module
Operating Voltage5-265 Volt AC or 5-125 Volts DC
Outputs4
Output TypesN.O. Relay Contact
Current/Output (120 VAC) 1.5 amps
Current/Output (24VDC)1.2 amps
Backplane Current45 milliamps
ApplicationsRelay Contact Outputs
Step Response60 milliseconds in, 2.5 milliseconds out
ManufacturerRockwell Automation
BrandAllen-Bradley
Part Number/Catalog No.1746-OW4
SeriesSLC 500
Module TypeDigital Contact Output Module
Operating Voltage5-265 Volt AC or 5-125 Volts DC
Outputs4
Output TypesN.O. Relay Contact
Current/Output (120 VAC) 1.5 amps
Current/Output (24VDC)1.2 amps
Backplane Current45 milliamps
ApplicationsRelay Contact Outputs
Step Response60 milliseconds in, 2.5 milliseconds out
s

About 1746-OW4

The Allen-Bradley 1746-OW4 is a relay contact output module. It has 4 relay contact outputs and no relay contact inputs. It has 4 common points. It is an AC/DC relay output module that is suitable for any application of relay contact type outputs. The relay contact module is vulnerable to chemical exposure because it may degrade the sealing materials. Therefore, the 1746-OW4 is recommended to inspect the module periodically to avoid any degradation and to quickly replace the module if there is any degradation. 

The 1746-OW4 module has 2 ranges of operating voltages: 5-125V DC and 5-265V DC. The signal delay for both the ON and the OFF state is 10 ms. The backplane current consumption of this module at both 5V DC and 24V DC is 0.045A for each. The minimum load current of this module is 1 mA at 5V DC. Please refer to the user manual to learn more about the continuous current per point in this module. The maximum thermal dissipation of the 1746-OW4 module is only 1.9 W. The heat dissipation per point for the 1746-OW4 is 0.133 W. This module also has a maximum continuous current per module of 8A. 

Please disconnect the power to the module before you do any wiring or installation. Always refer to the user manual during the installation process, to prevent accidents. 



Repair Services for 1746-OW4

Type Lead Time Price Action
Repair Service 2-4 weeks $83cartAdd to Cart

Our highly skilled technicians can repair your SLC 500 1746-OW4. All of our repairs come with a 1 Year Warranty. Please contact us for additional information.

Revisions for 1746-OW4

Please refer to the manual for more information about the 1746-OW4 such as the wiring diagrams, data sheets and migration or obsolescence details.

Revision Part # Also Known as Availability
1746-OW4 Ser A
1746-OW4/A, Series A, Rev A Request Quote
Common misspellings:
  • l746-OW4
  • 17A6-OW4
  • 1746-0W4
  • 1746-OWA
  • 1746OW4
  • 1747-OW4

Reviews for 1746-OW4

I/O Rating

"The lowest amount of I/O offered. Depending on the program, this could still be the perfect amount. " -DO Supply Tech

Voltage Range

"Typical operating range for most modules. This style shouldn't take any major modifications. " -DO Supply Tech

Fused

"This module is not protected by a fuse that is in line with the power source. " -DO Supply Tech

Dimensions For 1746-OW4

Size
Input Type
Panel Cutout Height in mm
Panel Cutout Width in mm
Terminal Height in mm
Terminal Width in mm
Terminal Overall Depth in mm
Terminal Mounted Depth in mm

Dimensions For 1746-OW4

Resolutions For 1746-OW4

About

Technical Specifications for 1746-OW4

ManufacturerRockwell Automation
BrandAllen-Bradley
Part Number/Catalog No.1746-OW4
SeriesSLC 500
Module TypeDigital Contact Output Module
Operating Voltage5-265 Volt AC or 5-125 Volts DC
Outputs4
Output TypesN.O. Relay Contact
Current/Output (120 VAC) 1.5 amps
Current/Output (24VDC)1.2 amps
Backplane Current45 milliamps
ApplicationsRelay Contact Outputs
Step Response60 milliseconds in, 2.5 milliseconds out
ManufacturerRockwell Automation
BrandAllen-Bradley
Part Number/Catalog No.1746-OW4
SeriesSLC 500
Module TypeDigital Contact Output Module
Operating Voltage5-265 Volt AC or 5-125 Volts DC
Outputs4
Output TypesN.O. Relay Contact
Current/Output (120 VAC) 1.5 amps
Current/Output (24VDC)1.2 amps
Backplane Current45 milliamps
ApplicationsRelay Contact Outputs
Step Response60 milliseconds in, 2.5 milliseconds out

About 1746-OW4

The Allen-Bradley 1746-OW4 is a relay contact output module. It has 4 relay contact outputs and no relay contact inputs. It has 4 common points. It is an AC/DC relay output module that is suitable for any application of relay contact type outputs. The relay contact module is vulnerable to chemical exposure because it may degrade the sealing materials. Therefore, the 1746-OW4 is recommended to inspect the module periodically to avoid any degradation and to quickly replace the module if there is any degradation. 

The 1746-OW4 module has 2 ranges of operating voltages: 5-125V DC and 5-265V DC. The signal delay for both the ON and the OFF state is 10 ms. The backplane current consumption of this module at both 5V DC and 24V DC is 0.045A for each. The minimum load current of this module is 1 mA at 5V DC. Please refer to the user manual to learn more about the continuous current per point in this module. The maximum thermal dissipation of the 1746-OW4 module is only 1.9 W. The heat dissipation per point for the 1746-OW4 is 0.133 W. This module also has a maximum continuous current per module of 8A. 

Please disconnect the power to the module before you do any wiring or installation. Always refer to the user manual during the installation process, to prevent accidents. 



Repairs
Type Lead Time Price Action
Repair Service 2-4 weeks $83cartAdd to Cart

Our highly skilled technicians can repair your SLC 500 1746-OW4. All of our repairs come with a 1 Year Warranty. Please contact us for additional information.

Type Lead Time Price Action
Repair Service 2-4 weeks $83cartAdd to Cart

Our highly skilled technicians can repair your SLC 500 1746-OW4. All of our repairs come with a 1 Year Warranty. Please contact us for additional information.

Revisions

Please refer to the manual for more information about the 1746-OW4 such as the wiring diagrams, data sheets and migration or obsolescence details.

Revision Part # Also Known as Availability
1746-OW4 Ser A
1746-OW4/A, Series A, Rev A Request Quote

Common misspellings:
  • l746-OW4
  • 17A6-OW4
  • 1746-0W4
  • 1746-OWA
  • 1746OW4
PDF
Reviews

Reviews for 1746-OW4

I/O Rating

"The lowest amount of I/O offered. Depending on the program, this could still be the perfect amount. " -DO Supply Tech

Voltage Range

"Typical operating range for most modules. This style shouldn't take any major modifications. " -DO Supply Tech

Fused

"This module is not protected by a fuse that is in line with the power source. " -DO Supply Tech