1746-P5 - In Stock | Allen Bradley PLC SLC 500

1746-P5

Rated 4.3 with 13 reviews

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.


credit cards accepted
better business bureau

1746-P5

Revisions: Ser A 
Description: The 1746-P5 power supply module is designed by Allen-Bradley for powering up SLC 500 controller systems in industrial environments. It does not have a jumper for selecting different input voltage ratings like some of the other SLC 500 series power supplies do. The line voltage range for the 1746-P5 power supply module is 90 to 146 Volts DC. Additionally, its 24 Volts DC user power voltage range is from 18 to 30 Volts DC. The 1746-P5 power supply module can be operated safely in all non-hazardous environments as well as in certain types of hazardous ones and its operating temperature range is from 0 to 60 degrees Celsius.
In Stock Ships Today
Request a quote for 1746-P5

Description: The 1746-P5 power supply module is designed by Allen-Bradley for powering up SLC 500 controller systems in industrial environments. It does not have a jumper for selecting different input voltage ratings like some of the other SLC 500 series power supplies do. The line voltage range for the 1746-P5 power supply module is 90 to 146 Volts DC. Additionally, its 24 Volts DC user power voltage range is from 18 to 30 Volts DC. The 1746-P5 power supply module can be operated safely in all non-hazardous environments as well as in certain types of hazardous ones and its operating temperature range is from 0 to 60 degrees Celsius.

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

disclaimer
credit cards
better business bureau
Revisions: Ser A 

Warranty: 1 year DO Supply Warranty Included
Shipping: Worldwide shipping via UPS, DHL, and TNT
Repairs: We offer repair service for the 1746-P5.
Exchange: Exchange credit for your defective unit available.
Conditions: We sell preowned surplus and refurbished parts.

To speak to a sales representative for pricing & lead time:


Rated 4.3 with 13 reviews

    Technical Specifications for 1746-P5

ManufacturerRockwell Automation
BrandAllen-Bradley
Part Number/Catalog No.1746-P5
SeriesSLC 500
Module TypePower Supply
Input Voltage125 Volts DC
Input Voltage Range90-146 Volts DC
Input Power85 Watts
Inrush Current20 amps
Output Voltage Range18-30 Volts DC
FrequencyDC
Backplane Current (5 Volts)5 amps
Backplane Current (24 Volts DC)0.96 amps
Location1746 Chassis
Weight 0.8 pounds (0.4 kilograms)
Dimensions5.5 x 2.9 x 5.7 inches
Operating Temperature0-60 Celsius
ManufacturerRockwell Automation
BrandAllen-Bradley
Part Number/Catalog No.1746-P5
SeriesSLC 500
Module TypePower Supply
Input Voltage125 Volts DC
Input Voltage Range90-146 Volts DC
Input Power85 Watts
Inrush Current20 amps
Output Voltage Range18-30 Volts DC
FrequencyDC
Backplane Current (5 Volts)5 amps
Backplane Current (24 Volts DC)0.96 amps
Location1746 Chassis
Weight 0.8 pounds (0.4 kilograms)
Dimensions5.5 x 2.9 x 5.7 inches
Operating Temperature0-60 Celsius
s

About 1746-P5

The Allen-Bradley 1746-P5 is an SLC 500 power supply. Measuring 145 x 74 x 140 millimeters, it has an input voltage range of 90-146V DC and a nominal input voltage of 125V DC. It has a maximum inrush current of 20 A and a maximum real input power of 85 W. The internal current capacity of this power supply is 5 A at 5V DC and 0.96 A at 24V DC. The user-power current capacity of this power supply is 200 mA and the user-power voltage range is from 18-30V DC at 24V DC. The backplane and input terminal isolation of the 1746-P5 power supply is 1800V AC RMS for 1 second. It also has a CPU hold-up time of 20 ms for a full load and 3000 ms for no load. The ambient operating temperature range of this power supply is from 0-60 ËšC but the current capacity is derated by 5% when the temperature is above 55 ËšC. It also has a 5-95% non-condensing relative humidity range.



One power supply will support one chassis and the LED indicator allows you to monitor the operation of the power supply. The fuse protection of the power supply, which is soldered in place and non-replaceable, is only for protection against fire hazards caused by short-circuit conditions. It uses a 1746 chassis and has an open-type enclosure.



For user-power overcurrent conditions, the 1746-P5 Series A power supply will undergo a 24V DC user shutdown while the CPU continues its operations. The recovery procedure for this is to correct the overcurrent condition.



In undercurrent conditions, where the power supply receives an input voltage that is lower than the recommended operating voltage range, the SLC 500 controllers will continue to operate for a short time. It will cease its operations when the input voltage to the power supply is cut off or the power supply still receives a lower input voltage longer than the hold-up time.



Technical Description of 1746-P5

The Allen-Bradley 1746-P5 is a SLC 500 Power Supply. This Power Supply has an Input Voltage of 125 Volts DC and an Input Voltage Range of 90-146 Volts DC. It requires an Input Power of 85 Watts while providing an Output Voltage Range of 18-30 Volts DC.

Repair Services for 1746-P5

Type Lead Time Price Action
Repair Service 2-4 weeks $583cartAdd to Cart

Our highly skilled technicians can repair your SLC 500 1746-P5. All of our repairs come with a 1 Year Warranty. Please contact us for additional information.

Revisions for 1746-P5

Please refer to the manual for more information about the 1746-P5 such as the wiring diagrams, data sheets and migration or obsolescence details.

Revision Part # Also Known as Availability
1746-P5 Ser A
1746-P5/A, Series A, Rev A Request Quote
Common misspellings:
  • l746-P5
  • 17A6-P5
  • 1746P5
  • 1747-P5

Reviews for 1746-P5

Input Voltage

"A larger or smaller power source than normal may be required to use this Allen Bradley power supply. " -DO Supply Tech

Inrush Current

"This power supply is second best when it comes to handling inrush current " -DO Supply Tech

Compatible Processors

"Communicates with every rack mounted SLC processor, including the SLC 5/01 ,5/02, 5/03, 5/04, 5/05. " -DO Supply Tech

Dimensions For 1746-P5

Size
Input Type
Panel Cutout Height in mm
Panel Cutout Width in mm
Terminal Height in mm
Terminal Width in mm
Terminal Overall Depth in mm
Terminal Mounted Depth in mm

Dimensions For 1746-P5

Resolutions For 1746-P5

About

Technical Specifications for 1746-P5

ManufacturerRockwell Automation
BrandAllen-Bradley
Part Number/Catalog No.1746-P5
SeriesSLC 500
Module TypePower Supply
Input Voltage125 Volts DC
Input Voltage Range90-146 Volts DC
Input Power85 Watts
Inrush Current20 amps
Output Voltage Range18-30 Volts DC
FrequencyDC
Backplane Current (5 Volts)5 amps
Backplane Current (24 Volts DC)0.96 amps
Location1746 Chassis
Weight 0.8 pounds (0.4 kilograms)
Dimensions5.5 x 2.9 x 5.7 inches
Operating Temperature0-60 Celsius
ManufacturerRockwell Automation
BrandAllen-Bradley
Part Number/Catalog No.1746-P5
SeriesSLC 500
Module TypePower Supply
Input Voltage125 Volts DC
Input Voltage Range90-146 Volts DC
Input Power85 Watts
Inrush Current20 amps
Output Voltage Range18-30 Volts DC
FrequencyDC
Backplane Current (5 Volts)5 amps
Backplane Current (24 Volts DC)0.96 amps
Location1746 Chassis
Weight 0.8 pounds (0.4 kilograms)
Dimensions5.5 x 2.9 x 5.7 inches
Operating Temperature0-60 Celsius

About 1746-P5

The Allen-Bradley 1746-P5 is an SLC 500 power supply. Measuring 145 x 74 x 140 millimeters, it has an input voltage range of 90-146V DC and a nominal input voltage of 125V DC. It has a maximum inrush current of 20 A and a maximum real input power of 85 W. The internal current capacity of this power supply is 5 A at 5V DC and 0.96 A at 24V DC. The user-power current capacity of this power supply is 200 mA and the user-power voltage range is from 18-30V DC at 24V DC. The backplane and input terminal isolation of the 1746-P5 power supply is 1800V AC RMS for 1 second. It also has a CPU hold-up time of 20 ms for a full load and 3000 ms for no load. The ambient operating temperature range of this power supply is from 0-60 ËšC but the current capacity is derated by 5% when the temperature is above 55 ËšC. It also has a 5-95% non-condensing relative humidity range.



One power supply will support one chassis and the LED indicator allows you to monitor the operation of the power supply. The fuse protection of the power supply, which is soldered in place and non-replaceable, is only for protection against fire hazards caused by short-circuit conditions. It uses a 1746 chassis and has an open-type enclosure.



For user-power overcurrent conditions, the 1746-P5 Series A power supply will undergo a 24V DC user shutdown while the CPU continues its operations. The recovery procedure for this is to correct the overcurrent condition.



In undercurrent conditions, where the power supply receives an input voltage that is lower than the recommended operating voltage range, the SLC 500 controllers will continue to operate for a short time. It will cease its operations when the input voltage to the power supply is cut off or the power supply still receives a lower input voltage longer than the hold-up time.



Technical Description of 1746-P5

The Allen-Bradley 1746-P5 is a SLC 500 Power Supply. This Power Supply has an Input Voltage of 125 Volts DC and an Input Voltage Range of 90-146 Volts DC. It requires an Input Power of 85 Watts while providing an Output Voltage Range of 18-30 Volts DC.
Repairs
Type Lead Time Price Action
Repair Service 2-4 weeks $583cartAdd to Cart

Our highly skilled technicians can repair your SLC 500 1746-P5. All of our repairs come with a 1 Year Warranty. Please contact us for additional information.

Type Lead Time Price Action
Repair Service 2-4 weeks $583cartAdd to Cart

Our highly skilled technicians can repair your SLC 500 1746-P5. All of our repairs come with a 1 Year Warranty. Please contact us for additional information.

Revisions

Please refer to the manual for more information about the 1746-P5 such as the wiring diagrams, data sheets and migration or obsolescence details.

Revision Part # Also Known as Availability
1746-P5 Ser A
1746-P5/A, Series A, Rev A Request Quote

Common misspellings:
  • l746-P5
  • 17A6-P5
  • 1746P5
PDF
Reviews

Reviews for 1746-P5

Input Voltage

"A larger or smaller power source than normal may be required to use this Allen Bradley power supply. " -DO Supply Tech

Inrush Current

"This power supply is second best when it comes to handling inrush current " -DO Supply Tech

Compatible Processors

"Communicates with every rack mounted SLC processor, including the SLC 5/01 ,5/02, 5/03, 5/04, 5/05. " -DO Supply Tech