1746sc-OAP8I - In Stock | Allen Bradley PLC SLC 500

1746sc-OAP8I

Rated 4.6 with 7 reviews

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.


credit cards accepted
better business bureau

1746sc-OAP8I

Revisions: Ser A Ser B 
Description: The Spectrum 1746sc-OAP8I Isolated AC Triac Output Module has 8 Outputs and a Triac Output Type. It has a 120/240V AC Voltage and a 0.375 Output Current Rating per Module.
In Stock Ships Today
Request a quote for 1746sc-OAP8I

Description: The Spectrum 1746sc-OAP8I Isolated AC Triac Output Module has 8 Outputs and a Triac Output Type. It has a 120/240V AC Voltage and a 0.375 Output Current Rating per Module.

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

disclaimer
credit cards
better business bureau
Revisions: Ser A Ser B 

Warranty: 1 year DO Supply Warranty Included
Shipping: Worldwide shipping via UPS, DHL, and TNT
Repairs: We offer repair service for the 1746sc-OAP8I.
Exchange: Exchange credit for your defective unit available.
Conditions: We sell preowned surplus and refurbished parts.

To speak to a sales representative for pricing & lead time:


Rated 4.6 with 7 reviews

    Technical Specifications for 1746sc-OAP8I

ManufacturerRockwell Automation
BrandAllen-Bradley
Part Number/Catalog No.1746sc-OAP8I
Product TypeIsolated AC Triac Output Module
Rockwell Automation Compatible SeriesSLC 500
Outputs8
Output TypeTriac
Voltage120 to 240 Volts AC
Output Current Rating per Module0.375 Amps
Isolation Voltage1500 Volts AC
Power Dissipation9.85 W maximum
ManufacturerRockwell Automation
BrandAllen-Bradley
Part Number/Catalog No.1746sc-OAP8I
Product TypeIsolated AC Triac Output Module
Rockwell Automation Compatible SeriesSLC 500
Outputs8
Output TypeTriac
Voltage120 to 240 Volts AC
Output Current Rating per Module0.375 Amps
Isolation Voltage1500 Volts AC
Power Dissipation9.85 W maximum
s

About 1746sc-OAP8I

The 1746sc-OAP8I is an isolated AC Triac Output Module. It has been created and manufactured by Spectrum. It runs with a 120 to 240 Volts AC power supply. It gives an output current of 0.375 Amps per module. This module comes with 8 outputs. The 1746sc-OAP8I  is compatible with several different Rockwell Automation devices. The isolation voltage for this module is 1500 Volts AC and it dissipates a power rating of 9.85 Watts maximum. The module has a factory-rated operating temperature in the range of 0 to 60 degrees Celsius. A proper humid environment is necessary for running the device in an optimal manner.



The 1746sc-OAP8I has a wide operating range for increased versatility. It is used with high inductive loads, motor starters, and relays, and it does not require back EMF surge suppression for inductive loads. It can be considered as a replacement for the relay output module. It is a robust device and it is built to perform under rigorous conditions. This module is made to work with a wide range of devices from limit switches to proximity switches. It can also be used to monitor relays or the motor outputs. This module has been certified with different standards like the UL, CE, and EMC standards. The 1746sc-OAP8I is being widely used in industrial and commercial areas. Using this module, other circuits will not be affected if there is overloading or noise in 1 circuit. Different power sources can also be connected to the same module without hampering other components due to the voltage differences.



Repair Services for 1746sc-OAP8I

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 1746sc-OAP8I. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Revisions for 1746sc-OAP8I

Please refer to the manual for more information about the 1746sc-OAP8I such as the wiring diagrams, data sheets and migration or obsolescence details.

Revision Part # Also Known as Availability
1746sc-OAP8I Ser A
1746sc-OAP8I/A, Series A, Rev A Request Quote
1746sc-OAP8I Ser B
1746sc-OAP8I/B, Series B, Rev B Request Quote
Common misspellings:
  • l746sc-OAP8I
  • 17A6sc-OAP8I
  • 1746sc-0AP8I
  • 1746sc-OAPbI
  • 1746scOAP8I
  • 1747sc-OAP8I

Dimensions For 1746sc-OAP8I

Size
Input Type
Panel Cutout Height in mm
Panel Cutout Width in mm
Terminal Height in mm
Terminal Width in mm
Terminal Overall Depth in mm
Terminal Mounted Depth in mm

Dimensions For 1746sc-OAP8I

Resolutions For 1746sc-OAP8I

About

Technical Specifications for 1746sc-OAP8I

ManufacturerRockwell Automation
BrandAllen-Bradley
Part Number/Catalog No.1746sc-OAP8I
Product TypeIsolated AC Triac Output Module
Rockwell Automation Compatible SeriesSLC 500
Outputs8
Output TypeTriac
Voltage120 to 240 Volts AC
Output Current Rating per Module0.375 Amps
Isolation Voltage1500 Volts AC
Power Dissipation9.85 W maximum
ManufacturerRockwell Automation
BrandAllen-Bradley
Part Number/Catalog No.1746sc-OAP8I
Product TypeIsolated AC Triac Output Module
Rockwell Automation Compatible SeriesSLC 500
Outputs8
Output TypeTriac
Voltage120 to 240 Volts AC
Output Current Rating per Module0.375 Amps
Isolation Voltage1500 Volts AC
Power Dissipation9.85 W maximum

About 1746sc-OAP8I

The 1746sc-OAP8I is an isolated AC Triac Output Module. It has been created and manufactured by Spectrum. It runs with a 120 to 240 Volts AC power supply. It gives an output current of 0.375 Amps per module. This module comes with 8 outputs. The 1746sc-OAP8I  is compatible with several different Rockwell Automation devices. The isolation voltage for this module is 1500 Volts AC and it dissipates a power rating of 9.85 Watts maximum. The module has a factory-rated operating temperature in the range of 0 to 60 degrees Celsius. A proper humid environment is necessary for running the device in an optimal manner.



The 1746sc-OAP8I has a wide operating range for increased versatility. It is used with high inductive loads, motor starters, and relays, and it does not require back EMF surge suppression for inductive loads. It can be considered as a replacement for the relay output module. It is a robust device and it is built to perform under rigorous conditions. This module is made to work with a wide range of devices from limit switches to proximity switches. It can also be used to monitor relays or the motor outputs. This module has been certified with different standards like the UL, CE, and EMC standards. The 1746sc-OAP8I is being widely used in industrial and commercial areas. Using this module, other circuits will not be affected if there is overloading or noise in 1 circuit. Different power sources can also be connected to the same module without hampering other components due to the voltage differences.



Repairs
Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 1746sc-OAP8I. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 1746sc-OAP8I. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Revisions

Please refer to the manual for more information about the 1746sc-OAP8I such as the wiring diagrams, data sheets and migration or obsolescence details.

Revision Part # Also Known as Availability
1746sc-OAP8I Ser A
1746sc-OAP8I/A, Series A, Rev A Request Quote
1746sc-OAP8I Ser B
1746sc-OAP8I/B, Series B, Rev B Request Quote

Common misspellings:
  • l746sc-OAP8I
  • 17A6sc-OAP8I
  • 1746sc-0AP8I
  • 1746sc-OAPbI
  • 1746scOAP8I
PDF