DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The Woodhead SST-PB3-SLC SST PB3 In Chassis Module is used in conjunction with the Allen-Bradley SLC 500 series. It has 1 Channel and 1 Port .
DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Warranty: | 1 year DO Supply Warranty Included |
Shipping: | Worldwide shipping via UPS, DHL, and TNT |
Repairs: | We offer repair service for the SST-PB3-SLC. |
Exchange: | Exchange credit for your defective unit available. |
Conditions: | We sell preowned surplus and refurbished parts. |
Part Number | SST-PB3-SLC |
Manufacturer | Woodhead |
Product Type | SST PB3 In Chassis Module |
Applicable Allen-Bradley Series | SLC 500 |
Channel | 1 |
Port | 1 |
Network Connection Type | PROFIBUS D-Sub Female (9 pin) |
Slave | PROFIBUS DPV0 |
Weight | 430 g |
Part Number | SST-PB3-SLC |
Manufacturer | Woodhead |
Product Type | SST PB3 In Chassis Module |
Applicable Allen-Bradley Series | SLC 500 |
Channel | 1 |
Port | 1 |
Network Connection Type | PROFIBUS D-Sub Female (9 pin) |
Slave | PROFIBUS DPV0 |
Weight | 430 g |
The Woodhead SST-PB3-SLC module is a PROFIBUS communication module that is compatible with Rockwell Automation SLC 500 series modules. The module has the ability to maximize the network flexibility by using the SST communication module for rapid communication to the PROFIBUS network. The module has a data space of 2064 bytes of input and 2064 bytes of output. This module is a cost-effective solution for connecting different CPUs in the PROFIBUS network. The SST-PB3-SLC module uses a single port and single channel for communication. The module is applicable with the SLC 500 series from Allen-Bradley. The communication module weighs 430 grams.
The SST-PB3-SLC module runs with 750 milliamps current and 5 Volts DC. During installation, the power should be turned off to avoid electrical damage. If there is electrical noise in the installation area, an additional isolation transformer should be installed near the module. The internal communication activity of the module can be seen on the front panel through an LED. The COMM LED will turn green when there is no network present. For a network error, the LED will turn red. The SST-PB3-SLC module can be configured and programmed by using the configuration tool. The module comes with a watchdog timer feature which runs after the module has been reset or fully powered up. A default time of 1000 milliseconds is used for the watchdog timer period which verifies the communication with the SLC processor. The scanner will fault if it does not get an I/O update within this time frame.
Type | Lead Time | Price | Action |
---|---|---|---|
Repair Service | 2-4 weeks | Ask | ![]() |
Our highly skilled technicians can repair your SST-PB3-SLC. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.
Please refer to the manual for more information about the SST-PB3-SLC such as the wiring diagrams, data sheets and migration or obsolescence details.
Revision Part # | Also Known as | Availability |
SST-PB3-SLC Ser A
|
SST-PB3-SLC/A, Series A, Rev A | Request Quote |
Size | |
Input Type | |
Panel Cutout Height | in mm |
Panel Cutout Width | in mm |
Terminal Height | in mm |
Terminal Width | in mm |
Terminal Overall Depth | in mm |
Terminal Mounted Depth | in mm |
Part Number | SST-PB3-SLC |
Manufacturer | Woodhead |
Product Type | SST PB3 In Chassis Module |
Applicable Allen-Bradley Series | SLC 500 |
Channel | 1 |
Port | 1 |
Network Connection Type | PROFIBUS D-Sub Female (9 pin) |
Slave | PROFIBUS DPV0 |
Weight | 430 g |
Part Number | SST-PB3-SLC |
Manufacturer | Woodhead |
Product Type | SST PB3 In Chassis Module |
Applicable Allen-Bradley Series | SLC 500 |
Channel | 1 |
Port | 1 |
Network Connection Type | PROFIBUS D-Sub Female (9 pin) |
Slave | PROFIBUS DPV0 |
Weight | 430 g |
The Woodhead SST-PB3-SLC module is a PROFIBUS communication module that is compatible with Rockwell Automation SLC 500 series modules. The module has the ability to maximize the network flexibility by using the SST communication module for rapid communication to the PROFIBUS network. The module has a data space of 2064 bytes of input and 2064 bytes of output. This module is a cost-effective solution for connecting different CPUs in the PROFIBUS network. The SST-PB3-SLC module uses a single port and single channel for communication. The module is applicable with the SLC 500 series from Allen-Bradley. The communication module weighs 430 grams.
The SST-PB3-SLC module runs with 750 milliamps current and 5 Volts DC. During installation, the power should be turned off to avoid electrical damage. If there is electrical noise in the installation area, an additional isolation transformer should be installed near the module. The internal communication activity of the module can be seen on the front panel through an LED. The COMM LED will turn green when there is no network present. For a network error, the LED will turn red. The SST-PB3-SLC module can be configured and programmed by using the configuration tool. The module comes with a watchdog timer feature which runs after the module has been reset or fully powered up. A default time of 1000 milliseconds is used for the watchdog timer period which verifies the communication with the SLC processor. The scanner will fault if it does not get an I/O update within this time frame.
Type | Lead Time | Price | Action |
---|---|---|---|
Repair Service | 2-4 weeks | Ask | ![]() |
Our highly skilled technicians can repair your SST-PB3-SLC. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.
Type | Lead Time | Price | Action |
---|---|---|---|
Repair Service | 2-4 weeks | Ask | ![]() |
Our highly skilled technicians can repair your SST-PB3-SLC. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.
Please refer to the manual for more information about the SST-PB3-SLC such as the wiring diagrams, data sheets and migration or obsolescence details.
Revision Part # | Also Known as | Availability |
SST-PB3-SLC Ser A
|
SST-PB3-SLC/A, Series A, Rev A | Request Quote |