2706-PCNETM | Allen Bradley InView

2706-PCNETM

Rated 4.9 with 12 reviews

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.


credit cards accepted
better business bureau

2706-PCNETM

Description: The 2706-PCNETM module is a ControlNet module for the InView message display unit. It is connected to the TB1 terminal block of the display unit.
Available Now
Request a quote for 2706-PCNETM

Description:

The 2706-PCNETM module is a ControlNet module for the InView message display unit. It is connected to the TB1 terminal block of the display unit.


DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

disclaimer
credit cards
better business bureau

Warranty: 1 year DO Supply Warranty Included
Shipping: Worldwide shipping via UPS, DHL, and TNT
Repairs: We offer repair service for the 2706-PCNETM.
Exchange: Exchange credit for your defective unit available.
Conditions: We sell preowned surplus and refurbished parts.

To speak to a sales representative for pricing & lead time:


Rated 4.9 with 12 reviews

    Technical Specifications for 2706-PCNETM

BrandAllen-Bradley / Rockwell Automation
SeriesInView
Part Number2706-PCNETM
DescriptionInView communication module
ModuleControl Net
Temperature0-50 degrees Celsius
StandardCE
ESD-sensitiveYes
Status IndicatorsLEDs
PC connectionWith an Ethernet adapter
BrandAllen-Bradley / Rockwell Automation
SeriesInView
Part Number2706-PCNETM
DescriptionInView communication module
ModuleControl Net
Temperature0-50 degrees Celsius
StandardCE
ESD-sensitiveYes
Status IndicatorsLEDs
PC connectionWith an Ethernet adapter
s

About 2706-PCNETM

The 2706-PCNETM communication module is an Allen-Bradley ControlNet communication module for the InView display unit known as the 2706-P4X display unit. The 2706-PCNETM communication module is mounted on the rear side of the display unit. The module is used for network and internal communication. The module is equipped with LED indicators to show communication and fault status. The indicators have Solid-Fill, No-Fill, Flashing and Blinking lighting patterns to indicate different events. These indicators are also used to isolate problems. The 2706-PCNETM module can be connected to a personal computer by using an Ethernet adapter. The InView message display unit is mostly used in industries to show information and for communication. The module should be operated at a temperature between 0 and 50 degrees Celsius. The communication module is certified with different standards and it comes with a CE mark. It is ready to use for a wide range of operators. It also meets the requirements of the EMC specifications.



 



The InView message display unit should be fully disconnected from power during the installation of the Allen-Bradley 2706-PCNETM communication module. Latches located on the front panel of the display unit must be removed and then the communication module can be installed. The module is installed to the mounting plate near the terminal block. The power is supplied to the communication module via the display unit using a serial cable. The 2706-PCNETM module is made out of sensitive units and it should be kept away from electrostatic discharge (ESD). The module should also be kept away from heat-generating devices. The 2706-PCNETM module comes with a default IP address of 192.168.1.1 which can later be configured by the operators.



Repair Services for 2706-PCNETM

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 2706-PCNETM. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Dimensions For 2706-PCNETM

Size
Input Type
Panel Cutout Height in mm
Panel Cutout Width in mm
Terminal Height in mm
Terminal Width in mm
Terminal Overall Depth in mm
Terminal Mounted Depth in mm

Dimensions For 2706-PCNETM

Resolutions For 2706-PCNETM

About

Technical Specifications for 2706-PCNETM

BrandAllen-Bradley / Rockwell Automation
SeriesInView
Part Number2706-PCNETM
DescriptionInView communication module
ModuleControl Net
Temperature0-50 degrees Celsius
StandardCE
ESD-sensitiveYes
Status IndicatorsLEDs
PC connectionWith an Ethernet adapter
BrandAllen-Bradley / Rockwell Automation
SeriesInView
Part Number2706-PCNETM
DescriptionInView communication module
ModuleControl Net
Temperature0-50 degrees Celsius
StandardCE
ESD-sensitiveYes
Status IndicatorsLEDs
PC connectionWith an Ethernet adapter

About 2706-PCNETM

The 2706-PCNETM communication module is an Allen-Bradley ControlNet communication module for the InView display unit known as the 2706-P4X display unit. The 2706-PCNETM communication module is mounted on the rear side of the display unit. The module is used for network and internal communication. The module is equipped with LED indicators to show communication and fault status. The indicators have Solid-Fill, No-Fill, Flashing and Blinking lighting patterns to indicate different events. These indicators are also used to isolate problems. The 2706-PCNETM module can be connected to a personal computer by using an Ethernet adapter. The InView message display unit is mostly used in industries to show information and for communication. The module should be operated at a temperature between 0 and 50 degrees Celsius. The communication module is certified with different standards and it comes with a CE mark. It is ready to use for a wide range of operators. It also meets the requirements of the EMC specifications.



 



The InView message display unit should be fully disconnected from power during the installation of the Allen-Bradley 2706-PCNETM communication module. Latches located on the front panel of the display unit must be removed and then the communication module can be installed. The module is installed to the mounting plate near the terminal block. The power is supplied to the communication module via the display unit using a serial cable. The 2706-PCNETM module is made out of sensitive units and it should be kept away from electrostatic discharge (ESD). The module should also be kept away from heat-generating devices. The 2706-PCNETM module comes with a default IP address of 192.168.1.1 which can later be configured by the operators.



Repairs
Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 2706-PCNETM. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 2706-PCNETM. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

PDF