2711-K3A10L1

The Allen-Bradley 2711-K3A10L1 is a PanelView 300 Terminal. The discontinued Allen-Bradley PanelView 300 2711-K3A10L1 is an operator terminal that enables the user to interface with their machine. The flat panel architecture of the 2711-K3A10L1 allows the user to maintain the high-level performance in a space-saving interface. Additionally, the display offers a variety of graphics on the monochrome display.

This Human-Machine Interface has a 3-inch monochrome display. This Panelview is configured using PanelBuilder 32 software, which runs on a personal computer. This terminal is equipped with DeviceNet communication and an RS-232 communication port with a 1761-CBL-PM02 communication cable.

The user is able to control the HMI using the Keypad to input information and data. The keypad has 8 function keys (F1 through F8). This unit is powered using 24 Volt DC and consumes up to 25 Watts when operating at 24 Volts DC. This unit has 240 kilobytes of internal memory. The internal backlight on this unit is non-replaceable.

The approximate shipping weight and dimensions are 3 pounds and 11 x 8 x 6 inches. The most common Series are A and B and the most common firmware include 4.00-4.48.

This unit comes with a gasket seal, in order to ensure a good seal make sure the sealing gasket is positioned correctly on the PanelView terminal. This gasket, when used correctly, is able to form a compression type seal. You should not use any sealing compounds on this unit.

The 2711-K3A10L1 is part of the Allen-Bradley’s Bulletin 2711 PanelView Standard Operator Terminal. The 2711-L3A10L1 is specifically part of the PanelView 300 Monochrome terminal which is fitted with a Three (3) inches monochrome screen, Keypad assembly and a variety of communication port enabling the terminal to communicate, exchange data and perform monitoring and control with partner devices.

The 2711-K3A10L1 monochrome display has a Liquid Crystal Display (LCD) with integral LED backlight that is expected to operate up to 100,000 hour life when operated within specified operating parameters. The terminal’s effective display area is 73 mm (w) x 42 mm (h) or 2.87 in. (w) x 1.67 in. (h) with a resolution of 128 x 64 pixels.

The 2711-K3A10L1 comes with a integrated Flash Memory of 240K bytes intended for application screens as well as a variety of communication ports such as built-in RS232 printer port and a DeviceNet communication port.

Operation and interaction may be initiated via the keypad assembly with Eight (8) Function keys (F1 to F8), cursor keys and numeric entry keys. and ATA memory support. The 2711-K3A10L1 rated power supply input is 24VDC.

The 2711-K3A10L1 is capable of communicating with Allen-Bradley Programmable Logic Controllers (PLC) and 3rd party controllers as well. It is compatible with PLC5, SLC500, MicroLogix and Logix family of controllers. It may also be connected to alarm printers for printing of alarms and messages for data logging and historization.

PanelView Projects may be developed using the PanelBuilder32 software. This configuration software is a legacy application that allows offline development of user programs as well as commissioning tools.