|Warranty:||1 year DO Supply Warranty Included|
|Shipping:||Worldwide shipping via DHL, UPS, Fedex, and TNT|
|Repairs:||We offer repair service for the 2711-K3A5L1K in 3-5 days.|
|Exchange:||Exchange credit for your defective unit available.|
The PanelView Standard 300 is an electronic operator interface that provides functionality through color, grayscale or monochrome displays and through pixel graphics. The PanelView Standard 300 is available in several varieties of sizes and configurations to meet specific application requirements. All these variations improve operator productivity and simplify the programming process. The 2711-K3A5L1K Panelview Standard 300 has an Operator keypad input with eight function keys and an LCD monochrome color display, with an LED backlight. It has a display dimension of 73 x 42 millimeters (2.87 x 1.67 inches), and a display resolution of 128 x 64, and the LED backlight has a standby life of 100,000 hours. The 2711-K3A5L1K comes with an irreplaceable battery and a runtime application memory of 170 KB. It runs on a PanelBuilder32 software. It has a DH-485 (RS-232) communication port and supports an ATA Memory card. The input voltage of the 2711-K3A5L1K is between 18 to 32 Volts DC (24 Volts DC nominal), with a maximum power consumption of 10 Watts (0.42 amps at 24 Volts DC). With a weight of 673 grams (1.48 pounds,) the 2711-K3A5L1K has a dimension of 197 x 140 x 82 millimeters (7.76 x 5.53 x 3.21 inches) (length, breadth, and height). The 2711-K3A5L1K’s operating temperature is between 0 and 55 degrees Celsius (32 and 131 degrees Fahrenheit), and its storage temperature is between -20 and 85 degrees Celsius (-4 and 185 degrees Fahrenheit), and a working relative humidity range from 5 to 95% noncondensing at 0-55 degrees Celsius (32-131 degrees Fahrenheit) working temperature. It has a Shock rating of 30g and operational vibration of 2g.
This Panelview 300 has a DF1 screen lets you display and change the DF1/full duplex communication settings for a DF1 PV 300 terminal. This allows operators to adjust the communication parameters for the DF1 port on the PV 300 terminal. The settings need to match the target device. This unit comes with a gasket seal, in order to ensure a good seal, make sure the sealing gasket is positioned correctly on the Panelview terminal. This gasket when used correctly is able to form a compression type seal. The Max Node for DH-485 is the setting that allows you to enter the highest node number on the network, with a max of 31. Once you have entered the node, press ï¿½Enterï¿½ and the change will immediately take place. The Baud rate settings allow users to step through the communication rates every time you press a key. The different baud rates are: 1200, 2400, 9600, and 19200. The baud rate chosen will take effect immediately.