2713P-T12WD1-B | Allen Bradley Panelview 5310

2713P-T12WD1-B

Rated 3.6 with 8 reviews

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.


credit cards accepted
better business bureau

2713P-T12WD1-B

Description: The 2713P-T12WD1-B operator interface terminal is an Allen-Bradley Panelview 5310 series interface terminal that is brandless. It does not have the Allen-Bradley name or logo printed on it like most Allen-Bradley products do, which means that the users can easily label it with their own brand names or logos. The 2713P-T12WD1-B operator interface terminal can be used to monitor or control applications through its WXGA TFT color touchscreen. This touchscreen is 12.1 inches in diameter with an aspect ratio of 16:10. The 2713P-T12WD1-B operator interface terminal comes with an Ethernet port and 1 GB each of RAM and user memory.
Call
Request a quote for 2713P-T12WD1-B

Description: The 2713P-T12WD1-B operator interface terminal is an Allen-Bradley Panelview 5310 series interface terminal that is brandless. It does not have the Allen-Bradley name or logo printed on it like most Allen-Bradley products do, which means that the users can easily label it with their own brand names or logos. The 2713P-T12WD1-B operator interface terminal can be used to monitor or control applications through its WXGA TFT color touchscreen. This touchscreen is 12.1 inches in diameter with an aspect ratio of 16:10. The 2713P-T12WD1-B operator interface terminal comes with an Ethernet port and 1 GB each of RAM and user memory.

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

disclaimer
credit cards
better business bureau

Warranty: 1 year DO Supply Warranty Included
Shipping: Worldwide shipping via UPS, DHL, and TNT
Repairs: We offer repair service for the 2713P-T12WD1-B.
Exchange: Exchange credit for your defective unit available.
Conditions: We sell preowned surplus and refurbished parts.

To speak to a sales representative for pricing & lead time:


Rated 3.6 with 8 reviews

    Technical Specifications for 2713P-T12WD1-B

ManufacturerRockwell Automation
BrandAllen-Bradley
Series Panelview 5310 Terminal
Part Number/Catalog No.2713P-T12WD1-B
Display TypeColor LCD Display
Display Size12 in. Display
Input TypeAnalog Resistive Touchscreen
HMI Memory1 GB Ram Storage
Power Input 24 VDC Input, 12 W
Weight8 lbs
BrandlessYes
BacklightLED Backlight
CommunicationsEthernet and USB Ports
ManufacturerRockwell Automation
BrandAllen-Bradley
Series Panelview 5310 Terminal
Part Number/Catalog No.2713P-T12WD1-B
Display TypeColor LCD Display
Display Size12 in. Display
Input TypeAnalog Resistive Touchscreen
HMI Memory1 GB Ram Storage
Power Input 24 VDC Input, 12 W
Weight8 lbs
BrandlessYes
BacklightLED Backlight
CommunicationsEthernet and USB Ports
s

About 2713P-T12WD1-B

The 2713P-T12WD1-B is a PanelView 5310 terminal that comes unbranded. The input voltage of this terminal is 18-30V DC, and its nominal input voltage is 24V DC. Its typical power consumption is 12 W and its maximum power consumption is 0.67 A at 24V DC or 16 W. This terminal also has a typical inrush current of 15 A, as well as a power dissipation of 41 BTU/hr. The operating temperature of this terminal is 0-55 oC, while its non-operating temperature is -25-70 oC. Note that this terminal also has a non-condensing relative humidity of 5-95%.



 



A touch input is used on this terminal since it comes with an analog-resistive touchscreen display with 24-bit color graphics or 16.7 million colors. The display used is a thin film transistor liquid crystal display type that has a display size of 12.1 inches. It has a viewing area of 10.3 x 6.4 inches, an aspect ratio of 16:10, and a WXGA display resolution of 1280 x 800. The terminal’s display is also equipped with a non-replaceable backlight that has a minimum lifespan of 50,000 hours and a 5 W typical power consumption.



 



Found on the 2713P-T12WD1-B terminal are 3 ports, specifically 1 high-speed Type A USB 2.0 host port, 1 high-speed Type B USB 2.0 device port, and a 10/100 Ethernet port. It also has a red/green status indicator installed. The memory present on this terminal is 1 GB of RAM and 500 MB of user-memory that is non-volatile. The SD card slot allows you to add a 1784-SDx card for additional storage.



Technical Description of 2713P-T12WD1-B

This Brandless Panelview 5310 Terminal has a 12 in. Color Display and an Analog Resistive Touchscreen with 1 GB Ram Storage and 24 VDC Input, 12 W Power.

Repair Services for 2713P-T12WD1-B

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 2713P-T12WD1-B. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Revisions for 2713P-T12WD1-B

Please refer to the manual for more information about the 2713P-T12WD1-B such as the wiring diagrams, data sheets and migration or obsolescence details.

Revision Part # Also Known as Availability
2713P-T12WD1-B/A, Series A, Rev A Request Quote
2713P-T12WD1-BX
2713P-T12WD1-B/X, Series X, Rev X Request Quote
Common misspellings:
  • 27l3P-T12WD1-B
  • 2713P-Tl2WD1-B
  • 2713P-T12WDl-B
  • 2713P-T12WD1-8
  • 2713PT12WD1B

Dimensions For 2713P-T12WD1-B

Size 12.1 inch
Input Type Touch
Panel Cutout Height 218 mm (8.58 in)
Panel Cutout Width 312 mm (12.28 in)
Terminal Height 246 mm (9.69 in)
Terminal Width 340 mm (13.39 in)
Terminal Overall Depth 69.5 mm (2.74 in)
Terminal Mounted Depth 64 mm (2.5 in)

Dimensions For 2713P-T12WD1-B

Resolutions For 2713P-T12WD1-B

Size 12.1 inch Wide
Input Type Touch
Display Type Color TFT LCD (thin-film-transistor, liquid-crystal display)
Display Size (Diagonal) 12.1 in. widescreen
Viewing Area 261 x 163 mm (10.3 x 6.4 in.)
Display Resolution 1280 x 800 WXGA
Aspect Ratio 16:10
Typical Brightness 300 cd/m2 (Nits)
About

Technical Specifications for 2713P-T12WD1-B

ManufacturerRockwell Automation
BrandAllen-Bradley
Series Panelview 5310 Terminal
Part Number/Catalog No.2713P-T12WD1-B
Display TypeColor LCD Display
Display Size12 in. Display
Input TypeAnalog Resistive Touchscreen
HMI Memory1 GB Ram Storage
Power Input 24 VDC Input, 12 W
Weight8 lbs
BrandlessYes
BacklightLED Backlight
CommunicationsEthernet and USB Ports
ManufacturerRockwell Automation
BrandAllen-Bradley
Series Panelview 5310 Terminal
Part Number/Catalog No.2713P-T12WD1-B
Display TypeColor LCD Display
Display Size12 in. Display
Input TypeAnalog Resistive Touchscreen
HMI Memory1 GB Ram Storage
Power Input 24 VDC Input, 12 W
Weight8 lbs
BrandlessYes
BacklightLED Backlight
CommunicationsEthernet and USB Ports

About 2713P-T12WD1-B

The 2713P-T12WD1-B is a PanelView 5310 terminal that comes unbranded. The input voltage of this terminal is 18-30V DC, and its nominal input voltage is 24V DC. Its typical power consumption is 12 W and its maximum power consumption is 0.67 A at 24V DC or 16 W. This terminal also has a typical inrush current of 15 A, as well as a power dissipation of 41 BTU/hr. The operating temperature of this terminal is 0-55 oC, while its non-operating temperature is -25-70 oC. Note that this terminal also has a non-condensing relative humidity of 5-95%.



 



A touch input is used on this terminal since it comes with an analog-resistive touchscreen display with 24-bit color graphics or 16.7 million colors. The display used is a thin film transistor liquid crystal display type that has a display size of 12.1 inches. It has a viewing area of 10.3 x 6.4 inches, an aspect ratio of 16:10, and a WXGA display resolution of 1280 x 800. The terminal’s display is also equipped with a non-replaceable backlight that has a minimum lifespan of 50,000 hours and a 5 W typical power consumption.



 



Found on the 2713P-T12WD1-B terminal are 3 ports, specifically 1 high-speed Type A USB 2.0 host port, 1 high-speed Type B USB 2.0 device port, and a 10/100 Ethernet port. It also has a red/green status indicator installed. The memory present on this terminal is 1 GB of RAM and 500 MB of user-memory that is non-volatile. The SD card slot allows you to add a 1784-SDx card for additional storage.



Technical Description of 2713P-T12WD1-B

This Brandless Panelview 5310 Terminal has a 12 in. Color Display and an Analog Resistive Touchscreen with 1 GB Ram Storage and 24 VDC Input, 12 W Power.
Repairs
Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 2713P-T12WD1-B. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 2713P-T12WD1-B. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Revisions

Please refer to the manual for more information about the 2713P-T12WD1-B such as the wiring diagrams, data sheets and migration or obsolescence details.

Revision Part # Also Known as Availability
2713P-T12WD1-B/A, Series A, Rev A Request Quote
2713P-T12WD1-BX
2713P-T12WD1-B/X, Series X, Rev X Request Quote

Common misspellings:
  • 27l3P-T12WD1-B
  • 2713P-Tl2WD1-B
  • 2713P-T12WDl-B
  • 2713P-T12WD1-8
  • 2713PT12WD1B
PDF
Dimensions

Dimension For 2713P-T12WD1-B

Size 12.1 inch
Input Type Touch
Panel Cutout Height 218 mm (8.58 in)
Panel Cutout Width 312 mm (12.28 in)
Terminal Height 246 mm (9.69 in)
Terminal Width 340 mm (13.39 in)
Terminal Overall Depth 69.5 mm (2.74 in)
Terminal Mounted Depth 64 mm (2.5 in)
Resolutions

Resolutions For 2713P-T12WD1-B

Size 12.1 inch Wide
Input Type Touch
Display Type Color TFT LCD (thin-film-transistor, liquid-crystal display)
Display Size (Diagonal) 12.1 in. widescreen
Viewing Area 261 x 163 mm (10.3 x 6.4 in.)
Display Resolution 1280 x 800 WXGA
Aspect Ratio 16:10
Typical Brightness 300 cd/m2 (Nits)