2713P-T7WD1

The Allen-Bradley 2713P-T7WD1 PanelView 5310 terminal has a 7-inch widescreen color thin film transistor, liquid-crystal display screen that features a touch input. The display comes with 24-bit color graphics and it has an 800 x 480 WVGA display resolution. Its aspect ratio is 5:3 and its screen area is 6 x 3.6 inches. The terminal’s display has a non-replaceable backlight with a 3W typical power consumption and a minimum lifespan of 50,000 hours at 104 Deg. Fahrenheit. The analog-resistive touchscreen has a 1-million press actuation rating. The 2713P-T7WD1 has 1 GB RAM, and a non-volatile 500 MB user-memory you can use for storing projects. You can expand the 2713P-T7WD1 terminal’s storage by placing a 1784-SDx memory card in its SD card slot. It also has 3 communication ports: a 10/100 Ethernet port, a Type A high-speed USB 2.0 host port, and a Type B high-speed USB 2.0 device port. A red/green status indicator is also included on the 2713P-T7WD1. Its non-condensing ambient humidity range is 5-95%, its operating temperature is 32-122 Degree Fahrenheit, and storage temperature is -13- +158 Deg. Fahrenheit. The 2713P-T7WD1’s input voltage is 18-30V DC, with a nominal voltage of 24V DC. Its typical inrush current is 15A and its power dissipation is 31 BTU/hr. The 2713P-T7WD1’s maximum power consumption is 13W or 0.54A at 24V DC, and its typical power consumption is 9W. The 2713P-T7WD1 weighs 6lbs.

The 2713P-T7WD1 has a 7-inch widescreen, Colored Thin Film Transistor (TFT) screen that supports 24-bit color graphics or 16.7 million colors. It has a resolution of 800 x 480 WVGA and aspect ratio of 5:3. With effective viewing area of 152 x 91 mm (6.0 x 3.6 in.). This HMI operator interface device is equipped with a non-replaceable backlight with half-brightness expectancy of 50,000 h min at 40 °C (104 °F).

The 2713P-T7WD1 permits operator to interact to the process or machine by means of the analog resistive touchscreen with actuation rating of 1 million presses. To prevent damage to the touch interface, it is recommended to operate with an actuation force of < 100 grams. For further protection, use a stylus or a gloved finger when operating this operator interface terminal.

The 2713P-T7WD1 is powered by an external supply voltage of 24VDC, nominal with voltage range of 18-30VDC. This operator terminal is configured using the Studio 5000 View Designer and Logix Designer.

It has One (1) Ethernet communication interface that supports 10/100 Mbps communication rate and Two (2) USB ports for external storage and insertion of peripheral components.