2713P-T9WD1

Rated 4.6 with 12 reviews

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.


credit cards accepted
better business bureau

2713P-T9WD1

Description: The Allen-Bradley 2713P-T9WD1 terminal is an operator interface terminal with a widescreen touchscreen that supports color graphics. It has been designed and manufactured as a member of the Allen-Bradley Panelview 5310 terminal series. The 2713P-T9WD1 operator interface terminal�s widescreen touchscreen has a 9-inch display size and it is analog-resistive. The aspect ratio of the screen is 5:3 and its resolution is 800 x 480 pixels. The 2713P-T9WD1 operator interface terminal operates with 18 to 30 Volts DC input voltage and 24 Volts DC nominal voltage from a non-isolated power supply.
Call
Request a quote for 2713P-T9WD1

Description: The Allen-Bradley 2713P-T9WD1 terminal is an operator interface terminal with a widescreen touchscreen that supports color graphics. It has been designed and manufactured as a member of the Allen-Bradley Panelview 5310 terminal series. The 2713P-T9WD1 operator interface terminal�s widescreen touchscreen has a 9-inch display size and it is analog-resistive. The aspect ratio of the screen is 5:3 and its resolution is 800 x 480 pixels. The 2713P-T9WD1 operator interface terminal operates with 18 to 30 Volts DC input voltage and 24 Volts DC nominal voltage from a non-isolated power supply.

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

disclaimer
credit cards
better business bureau

Warranty: 1 year DO Supply Warranty Included
Shipping: Worldwide shipping via UPS, DHL, and TNT
Repairs: We offer repair service for the 2713P-T9WD1.
Exchange: Exchange credit for your defective unit available.
Conditions: We sell preowned surplus and refurbished parts.

To speak to a sales representative for pricing & lead time:


Rated 4.6 with 12 reviews

    Technical Specifications for 2713P-T9WD1

ManufacturerRockwell Automation
BrandAllen-Bradley
Series Panelview 5310 Terminal
Part Number/Catalog No.2713P-T9WD1
Display TypeColor LCD Display
Display Size9 in. Display
Input TypeAnalog Resistive Touchscreen
HMI Memory1 GB Ram Storage
Power Input 24 VDC Input, 11 W
Weight6 lbs
BrandlessNo
BacklightLED Backlight
CommunicationsEthernet and USB Ports
ManufacturerRockwell Automation
BrandAllen-Bradley
Series Panelview 5310 Terminal
Part Number/Catalog No.2713P-T9WD1
Display TypeColor LCD Display
Display Size9 in. Display
Input TypeAnalog Resistive Touchscreen
HMI Memory1 GB Ram Storage
Power Input 24 VDC Input, 11 W
Weight6 lbs
BrandlessNo
BacklightLED Backlight
CommunicationsEthernet and USB Ports
s

About 2713P-T9WD1

The Allen-Bradley 2713P-T9WD1 is a PanelView 5310 Terminal with an analog-resistive touchscreen input. It has a widescreen display that is also a thin-film transistor, liquid-crystal display screen with 24-bit color graphics and a 9-inch diagonal measurement. Its viewing area is 7.7 x 4.6 inches, its aspect ratio is 5:3, and its WVGA display resolution is 800 x 480. The display of the 2713P-T9WD1 terminal also has a non-replaceable backlight with a typical power consumption of 3.5 W and its minimum lifespan at half-brightness is 50,000 hours at 104oF. 



 



It has a power dissipation of 38 BTU/hr and a 15A typical inrush current. Its input voltage is 18-30V DC, with a nominal input voltage of 24V DC. The 2713P-T9WD1’s typical power consumption of this terminal is 11 W and the maximum power consumption is 14W or 0.58A at 24V DC. Its operating temperature is 32-122 oF and the non-operating temperature is -13-158 oF. Note that its non-condensing relative humidity is 5-95%.



 



The 2713P-T9WD1 has 3 ports: specifically a high-speed Type A USB host port, a high-speed Type B USB device port, and a 10/100 Ethernet port. It also has a red/green status indicator. The memory available on the 2713P-T9WD1 terminal is 1 GB of RAM and 500 MB of nonvolatile user-memory for storing your projects. Optional additional storage is available, because this terminal has an SD card slot compatible with 1784-SDx memory cards. The 2713P-T9WD1 weighs 6 lbs.



Technical Description of 2713P-T9WD1

This Panelview 5310 Terminal has a 9 in. Color Display and an Analog Resistive Touchscreen with 1 GB Ram Storage and 24 VDC Input, 11 W Power.

Repair Services for 2713P-T9WD1

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 2713P-T9WD1. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Revisions for 2713P-T9WD1

Please refer to the manual for more information about the 2713P-T9WD1 such as the wiring diagrams, data sheets and migration or obsolescence details.

Revision Part # Also Known as Availability
2713P-T9WD1/A, Series A, Rev A Request Quote
2713P-T9WD1X
2713P-T9WD1/X, Series X, Rev X Request Quote
Common misspellings:
  • 27l3P-T9WD1
  • 2713P-T9WDl
  • 2713PT9WD1

Dimensions For 2713P-T9WD1

Size 9 inch
Input Type Touch
Panel Cutout Height 162 mm (6.38 in)
Panel Cutout Width 252 mm (9.92 in)
Terminal Height 190 mm (7.48 in)
Terminal Width 280 mm (11.02 in)
Terminal Overall Depth 69.5 mm (2.74 in)
Terminal Mounted Depth 64 mm (2.5 in)

Dimensions For 2713P-T9WD1

Resolutions For 2713P-T9WD1

Size 9 inch
Input Type Touch
Display Type Color TFT LCD (thin-film-transistor, liquid-crystal display)
Display Size (Diagonal) 9 in. widescreen
Viewing Area 196 x 118 mm (7.7 x 4.6 in.)
Display Resolution 800 x 480 WVGA
Aspect Ratio 5:3
Typical Brightness 300 cd/m2 (Nits)
About

Technical Specifications for 2713P-T9WD1

ManufacturerRockwell Automation
BrandAllen-Bradley
Series Panelview 5310 Terminal
Part Number/Catalog No.2713P-T9WD1
Display TypeColor LCD Display
Display Size9 in. Display
Input TypeAnalog Resistive Touchscreen
HMI Memory1 GB Ram Storage
Power Input 24 VDC Input, 11 W
Weight6 lbs
BrandlessNo
BacklightLED Backlight
CommunicationsEthernet and USB Ports
ManufacturerRockwell Automation
BrandAllen-Bradley
Series Panelview 5310 Terminal
Part Number/Catalog No.2713P-T9WD1
Display TypeColor LCD Display
Display Size9 in. Display
Input TypeAnalog Resistive Touchscreen
HMI Memory1 GB Ram Storage
Power Input 24 VDC Input, 11 W
Weight6 lbs
BrandlessNo
BacklightLED Backlight
CommunicationsEthernet and USB Ports

About 2713P-T9WD1

The Allen-Bradley 2713P-T9WD1 is a PanelView 5310 Terminal with an analog-resistive touchscreen input. It has a widescreen display that is also a thin-film transistor, liquid-crystal display screen with 24-bit color graphics and a 9-inch diagonal measurement. Its viewing area is 7.7 x 4.6 inches, its aspect ratio is 5:3, and its WVGA display resolution is 800 x 480. The display of the 2713P-T9WD1 terminal also has a non-replaceable backlight with a typical power consumption of 3.5 W and its minimum lifespan at half-brightness is 50,000 hours at 104oF. 



 



It has a power dissipation of 38 BTU/hr and a 15A typical inrush current. Its input voltage is 18-30V DC, with a nominal input voltage of 24V DC. The 2713P-T9WD1’s typical power consumption of this terminal is 11 W and the maximum power consumption is 14W or 0.58A at 24V DC. Its operating temperature is 32-122 oF and the non-operating temperature is -13-158 oF. Note that its non-condensing relative humidity is 5-95%.



 



The 2713P-T9WD1 has 3 ports: specifically a high-speed Type A USB host port, a high-speed Type B USB device port, and a 10/100 Ethernet port. It also has a red/green status indicator. The memory available on the 2713P-T9WD1 terminal is 1 GB of RAM and 500 MB of nonvolatile user-memory for storing your projects. Optional additional storage is available, because this terminal has an SD card slot compatible with 1784-SDx memory cards. The 2713P-T9WD1 weighs 6 lbs.



Technical Description of 2713P-T9WD1

This Panelview 5310 Terminal has a 9 in. Color Display and an Analog Resistive Touchscreen with 1 GB Ram Storage and 24 VDC Input, 11 W Power.
Repairs
Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 2713P-T9WD1. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 2713P-T9WD1. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Revisions

Please refer to the manual for more information about the 2713P-T9WD1 such as the wiring diagrams, data sheets and migration or obsolescence details.

Revision Part # Also Known as Availability
2713P-T9WD1/A, Series A, Rev A Request Quote
2713P-T9WD1X
2713P-T9WD1/X, Series X, Rev X Request Quote

Common misspellings:
  • 27l3P-T9WD1
  • 2713P-T9WDl
  • 2713PT9WD1
PDF
Dimensions

Dimension For 2713P-T9WD1

Size 9 inch
Input Type Touch
Panel Cutout Height 162 mm (6.38 in)
Panel Cutout Width 252 mm (9.92 in)
Terminal Height 190 mm (7.48 in)
Terminal Width 280 mm (11.02 in)
Terminal Overall Depth 69.5 mm (2.74 in)
Terminal Mounted Depth 64 mm (2.5 in)
Resolutions

Resolutions For 2713P-T9WD1

Size 9 inch
Input Type Touch
Display Type Color TFT LCD (thin-film-transistor, liquid-crystal display)
Display Size (Diagonal) 9 in. widescreen
Viewing Area 196 x 118 mm (7.7 x 4.6 in.)
Display Resolution 800 x 480 WVGA
Aspect Ratio 5:3
Typical Brightness 300 cd/m2 (Nits)