|Warranty:||1 year DO Supply Warranty Included|
|Shipping:||Worldwide shipping via DHL, UPS, Fedex, and TNT|
|Repairs:||We offer repair service for the 2715-T10CA.|
|Exchange:||Exchange credit for your defective unit available.|
The Allen-Bradley 2715-T10CA is a PanelView 5500 terminal with a 10.4-inch resistive analog touchscreen and 100-240V AC input voltage. It has a line frequency of 50-60 Hz and an inrush current of 50A. The typical power consumption for this terminal is 43VA or 17W at 240V AC, while its maximum power consumption is 105VA. Its display has navigation buttons and it is backlit with a non-replaceable backlight that has a normal power consumption of 3.5W. The screen’s viewing area is 8.3 x 6.2 inches and its SVGA display resolution is 800 x 600, with a screen ratio of 4:3. The display installed on the 2715-T10CA terminal is a TFT LCD with 262,144 colors or 18-bit color graphics.
A 512 MB RAM is included in the 2715-T10CA terminal, and so is a 250 MB nonvolatile memory. Also installed on this terminal are 3 USB ports, two of which are on the host and are high-speed USB 2.0 type A ports primarily for external storage and 1 high-speed USB 2.0 type B port on the device used to connect it to the host computer. It also comes with an SD card slot for external storage and two 10/100 Ethernet ports. Note that you can only use 1794-SDx cards for the 2715-T10CA terminal. This terminal also has a red/green status indicator. Its approximate weight is 2.28 kg or 5.03 lbs and its dimensions are 9.92 x 11.69 x 2.74 inches. This module runs the FactoryTalk software and it has 250 MB and IP/EtherNet Comm ports.