2711-K6C5 | Allen Bradley Panelview 600

×

2711-K6C5

Rated 4.9 with 27 reviews
About | Product Specifications | FAQ

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.


credit cards accepted
better business bureau

2711-K6C5

Description: The Allen-Bradley 2711-K6C5 is a PanelView 600 Standard Operator Terminal. This operator terminal is powered by an external 85-264VAC supply voltage and has a 5-inch colored display with RS232 port interface that supports DH485 protocol. It has Ten (10) fully programmable function keys.
Available Now
Request a quote for 2711-K6C5

Description: The Allen-Bradley 2711-K6C5 is a PanelView 600 Standard Operator Terminal. This operator terminal is powered by an external 85-264VAC supply voltage and has a 5-inch colored display with RS232 port interface that supports DH485 protocol. It has Ten (10) fully programmable function keys.
About | Products Specs | FAQ

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

disclaimer
credit cards
better business bureau

Warranty: 1 year DO Supply Warranty Included
Shipping: Worldwide shipping via UPS, DHL, and TNT
Repairs: We offer repair service for the 2711-K6C5 in 3-5 days.
Exchange: Exchange credit for your defective unit available.
Conditions: We sell preowned surplus and refurbished parts.

To speak to a sales representative for pricing & lead time:


Rated 4.9 with 27 reviews

    Technical Specifications for 2711-K6C5

BrandAllen-Bradley
Input Voltage range:85…264V AC
Communication ports:RS232 (DH485)
Application memory:190 KB application runtime; 240 KB nonvolatile memory (application objects plus text and bitmaps)
Keypad Assembly:10 function keys (F1…F10)
Resolution:320 x 234
Display Area:115 x 86 mm (4.54 x 3.4 in.).
Display Type:Color active matrix TFT
Product Type:PanelView 600 Standard Operator Terminals
Product Family:PanelView Standard Operator Terminals
Manufacturer:Rockwell Automation
Input Frequency:47…63 Hz
Enclosure:NEMA Type 12/13, 4X (Indoor use only), IP54, IP65
Backlight50,000 hr. 1/2 life at 25 °C (77 °F)
Status Indicators:COMM: Green Fault: Red
Part Number/Catalog No.2711-K6C5
Product LinePanelview 600
Display Size5 in.
Display ColorColor
Input TypeKeypad
CommunicationRS-232 (DH-485)
Input Power85-264 VAC
Memory240 KB
Communication Cable2711-NC14
Shipping Weight6 lbs.
Shipping Dimensions14 x 11 x 8 in
SeriesA, B or C
Time Clock 2711-NB3 or 2711-NB4
Product Lifecycle Status*Discontinued/Obsolete

*The Allen Bradley 2711-K6C5 has been discontinued by the manufacturer, however we specialize in obsolete parts and can likely still supply surplus and/or refurbished replacement 2711-K6C5 units instead of migration.

BrandAllen-Bradley
Input Voltage range:85…264V AC
Communication ports:RS232 (DH485)
Application memory:190 KB application runtime; 240 KB nonvolatile memory (application objects plus text and bitmaps)
Keypad Assembly:10 function keys (F1…F10)
Resolution:320 x 234
Display Area:115 x 86 mm (4.54 x 3.4 in.).
Display Type:Color active matrix TFT
Product Type:PanelView 600 Standard Operator Terminals
Product Family:PanelView Standard Operator Terminals
Manufacturer:Rockwell Automation
Input Frequency:47…63 Hz
Enclosure:NEMA Type 12/13, 4X (Indoor use only), IP54, IP65
Backlight50,000 hr. 1/2 life at 25 °C (77 °F)
Status Indicators:COMM: Green Fault: Red
Part Number/Catalog No.2711-K6C5
Product LinePanelview 600
Display Size5 in.
Display ColorColor
Input TypeKeypad
CommunicationRS-232 (DH-485)
Input Power85-264 VAC
Memory240 KB
Communication Cable2711-NC14
Shipping Weight6 lbs.
Shipping Dimensions14 x 11 x 8 in
SeriesA, B or C
Time Clock 2711-NB3 or 2711-NB4
Product Lifecycle Status*Discontinued/Obsolete

*The Allen Bradley 2711-K6C5 has been discontinued by the manufacturer, however we specialize in obsolete parts and can likely still supply surplus and/or refurbished replacement 2711-K6C5 units instead of migration.

s

About 2711-K6C5

The PanelView Standard operator terminal with catalog number 2711-K6C5 is a PanelView 600 Visualization component from Allen-Bradley. This operator terminal is more popularly known as Human Machin Interface (HMI) with the primary purpose of providing process operators with a real-time monitoring and interface to the process via a combination of features embedded within the HMI.

Process visualization is achieved via the 5-inch colored graphic display wherein animations with color coded information may be implemented. This colored screen has a functional display area of 115 x 86 mm (4.54 x 3.4 in.). along a screen resolution of 320 x 234 pixels. The screen is paired with an internal backlight which is field replaceable and expected to operate up to 50,000 Hr.

Operator control and interface is provided by the embedded keypad that is composed of Ten (10) function keys, navigation and numeric keys. Each key performs individual function with the Function keys capable of accepting local and global assignment. These keys are expected up to 1 Million actuations and may be installed with function key legend inserts.

The 2711-K6C5 has DH485 communication port that is compatible with different Programmable Logic Controller (PLC) products of Allen-Bradley such as SLC 500, MicroLogix, CompactLogix and ControlLogix processors. It is also compatible with 3rd party to controllers and devices to enable process visualization and centralized monitoring and control.

The 2711-K6C5 is ideal for small machine and process. It has a built0in 240KB non-volatile memory and 190KB runtime application memory. It has a rated power supply input range of 85-264V AC, with a frequency of 47-63 Hz.

This PV 600 has a vivid 5 in. Color Display. The user is able to control the HMI using the Keypad to input information and data.

This unit is powered using 85-264 VAC power. This unit has the following internal memory of 240 KB non-volatile and 190KB runtime memory. The 2711-K6C5 PanelView has a replaceable backlight of 2711-NL3 for Series A and Series B units, and 2711-NL5 for Series C units.

The RS-232 (DH-485 protocol) Terminal connects to MicroLogix and SLC 500 controllers using DH-485 protocol. The point-to-point configuration uses a separate connection for high-priority data. They can also connect to a DH-485 network using the AIC+ module.

This process can also be done through the RS-232 Printer port, the standard RS-232/DH-485 port, or with a PC memory card such as the 2711-NM232.

FAQ for 2711-K6C5

Can you replace the time clock in the 2711-K6C5?


Yes, you can replace Ser A and Ser B units with 2711-NB3 and for Series C units use the 2711-NB4 battery.

What is the display size of the 2711-K6C5?


The 2711-K6C5 has a display size of 5 in.

Is the backlight replaceable for the 2711-K6C5?


Yes, this Panelview 600 backlight can be replaced with 2711-NL3 for Ser A or Ser B and the 2711-NL5 for Ser C units.

What type of display does the 2711-K6C5 have?


The 2711-K6C5 has a color display type.

Does the 2711-K6C5 have a RS-232 Print?


No, the 2711-K6C5 does not have an RS-232 Print.

What is the price of a 2711-K6C5 Allen Bradley PanelView Standard 600 Terminal?


Submit quote request, send us an email, or call 800-730-0292 for our best price.

Does DO Supply offer repair services for the 2711-K6C5 Allen Bradley PanelView Standard 600 Terminal?


Yes, DO Supply offers repair services for a variety of Allen-Bradley products, such as the 2711-K6C5. For more information or to request a repair quote, please click here.

What are the embedded memory of the 2711-K6C5?


The 2711-K6C5 has 240KB non-volatile memory and 190KB application runtime memory.

What is the power supply requirement of the 2711-K6C5?


The 2711-K6C5 is powered by an external AC voltage supply range of 85-264VAC.

How many function keys does the 2711-K6C5 have?


The 2711-K6C5 is provided with Ten (10) function keys.

Technical Description of 2711-K6C5

This Panelview 600 terminal comes with a RS-232 (DH-485) Communication Port.  This Panelview has a color display with keypad input and 85-264 VAC power. 

Repair Services for 2711-K6C5

Type Lead Time Price Action
Repair Service 2-4 weeks $2042cartAdd to Cart

We can Repair your Panelview 600

We have a team of highly trained technicians that can repair your panelview quickly at a great low price. To get a repair quote call 1-800-730-0292 or email sales@dosupply.com. Some of the benefits of our repair process includes:

  • Repair Turnaround of 3-5 Days for Most Panelviews
  • Rush Repairs of 1-3 Days
  • Fast Return of Your Repair via UPS, FedEx, or DHL.
  • If the item is not repairable, you can choose to have it returned to you free of charge or it can be counted as an exchange credit toward a refurbished or surplus unit if available.
  • Wide range of repairs that can be completed by our highly skilled technicians as shown below.

We Can Repair Your Hardware failures including:

  • Communication Hardware Faults (Ethernet/IP, DH-485, DH+, ControlNet, and RS-232)
  • Broken Toushcreen/Keypads
  • Broken Glass
  • Displays (Dead/Dim/Lines/Missing Pixels)
  • Dead Backlights
  • Broken Housing/Bezel
  • Power Board Failures

Revisions for 2711-K6C5

Please refer to the manual for more information about the 2711-K6C5 such as the wiring diagrams, data sheets and migration or obsolescence details.

Revision Part # Also Known as Availability
2711-K6C5 Ser A
2711-K6C5/A, Series A, Rev A Request Quote
2711-K6C5 Ser B
2711-K6C5/B, Series B, Rev B Request Quote
2711-K6C5 Ser C
2711-K6C5/C, Series C, Rev C Request Quote
2711-K6C5X
2711-K6C5/X, Series X, Rev X Request Quote
Common misspellings:
  • 27l1-K6C5
  • 271l-K6C5
  • 2711K6C5

Reviews for 2711-K6C5

Internal Review

"The 2711-K6C5 is part of the PanelView 600 operator terminal. This PanelView terminal features an RS232 interface that supports a DH485 communication protocol. This PanelView can only support peer to peer communication. Compared to the 2711-K6C20 which supports Ethernet interface networked, multi-client topology, the 2711-K6C5 is limited to communication exchange between a single controller. If intended to be used for a networked topology, an external network interface card may be used with the 2711-K6C5. " -DO Supply Tech

Dimensions For 2711-K6C5

Size 6 inch
Input Type Keypad and Touch
Panel Cutout Height 167 mm (6.57 in)
Panel Cutout Width 264 mm (10.39 in)
Terminal Height 192 mm (7.55 in)
Terminal Width 290 mm (11.40 in)
Terminal Overall Depth 116 mm (4.57 in)
Terminal Mounted Depth 91 mm (3.60 in)

Dimensions For 2711-K6C5

Resolutions For 2711-K6C5

Size 6 inch
Input Type Keypad, Keypad and Touch
Display Type Color active matrix TFT
Display Size (Diagonal) 6 in.
Viewing Area 115 x 86 mm (4.54 x 3.4 in.
Display Resolution 320 x 234
About

Technical Specifications for 2711-K6C5

BrandAllen-Bradley
Input Voltage range:85…264V AC
Communication ports:RS232 (DH485)
Application memory:190 KB application runtime; 240 KB nonvolatile memory (application objects plus text and bitmaps)
Keypad Assembly:10 function keys (F1…F10)
Resolution:320 x 234
Display Area:115 x 86 mm (4.54 x 3.4 in.).
Display Type:Color active matrix TFT
Product Type:PanelView 600 Standard Operator Terminals
Product Family:PanelView Standard Operator Terminals
Manufacturer:Rockwell Automation
Input Frequency:47…63 Hz
Enclosure:NEMA Type 12/13, 4X (Indoor use only), IP54, IP65
Backlight50,000 hr. 1/2 life at 25 °C (77 °F)
Status Indicators:COMM: Green Fault: Red
Part Number/Catalog No.2711-K6C5
Product LinePanelview 600
Display Size5 in.
Display ColorColor
Input TypeKeypad
CommunicationRS-232 (DH-485)
Input Power85-264 VAC
Memory240 KB
Communication Cable2711-NC14
Shipping Weight6 lbs.
Shipping Dimensions14 x 11 x 8 in
SeriesA, B or C
Time Clock 2711-NB3 or 2711-NB4
Product Lifecycle Status*Discontinued/Obsolete
BrandAllen-Bradley
Input Voltage range:85…264V AC
Communication ports:RS232 (DH485)
Application memory:190 KB application runtime; 240 KB nonvolatile memory (application objects plus text and bitmaps)
Keypad Assembly:10 function keys (F1…F10)
Resolution:320 x 234
Display Area:115 x 86 mm (4.54 x 3.4 in.).
Display Type:Color active matrix TFT
Product Type:PanelView 600 Standard Operator Terminals
Product Family:PanelView Standard Operator Terminals
Manufacturer:Rockwell Automation
Input Frequency:47…63 Hz
Enclosure:NEMA Type 12/13, 4X (Indoor use only), IP54, IP65
Backlight50,000 hr. 1/2 life at 25 °C (77 °F)
Status Indicators:COMM: Green Fault: Red
Part Number/Catalog No.2711-K6C5
Product LinePanelview 600
Display Size5 in.
Display ColorColor
Input TypeKeypad
CommunicationRS-232 (DH-485)
Input Power85-264 VAC
Memory240 KB
Communication Cable2711-NC14
Shipping Weight6 lbs.
Shipping Dimensions14 x 11 x 8 in
SeriesA, B or C
Time Clock 2711-NB3 or 2711-NB4
Product Lifecycle Status*Discontinued/Obsolete

*The Allen Bradley 2711-K6C5 has been discontinued by the manufacturer, however we specialize in obsolete parts and can likely still supply surplus and/or refurbished replacement 2711-K6C5 units instead of migration.

About 2711-K6C5

The PanelView Standard operator terminal with catalog number 2711-K6C5 is a PanelView 600 Visualization component from Allen-Bradley. This operator terminal is more popularly known as Human Machin Interface (HMI) with the primary purpose of providing process operators with a real-time monitoring and interface to the process via a combination of features embedded within the HMI.

Process visualization is achieved via the 5-inch colored graphic display wherein animations with color coded information may be implemented. This colored screen has a functional display area of 115 x 86 mm (4.54 x 3.4 in.). along a screen resolution of 320 x 234 pixels. The screen is paired with an internal backlight which is field replaceable and expected to operate up to 50,000 Hr.

Operator control and interface is provided by the embedded keypad that is composed of Ten (10) function keys, navigation and numeric keys. Each key performs individual function with the Function keys capable of accepting local and global assignment. These keys are expected up to 1 Million actuations and may be installed with function key legend inserts.

The 2711-K6C5 has DH485 communication port that is compatible with different Programmable Logic Controller (PLC) products of Allen-Bradley such as SLC 500, MicroLogix, CompactLogix and ControlLogix processors. It is also compatible with 3rd party to controllers and devices to enable process visualization and centralized monitoring and control.

The 2711-K6C5 is ideal for small machine and process. It has a built0in 240KB non-volatile memory and 190KB runtime application memory. It has a rated power supply input range of 85-264V AC, with a frequency of 47-63 Hz.

This PV 600 has a vivid 5 in. Color Display. The user is able to control the HMI using the Keypad to input information and data.

This unit is powered using 85-264 VAC power. This unit has the following internal memory of 240 KB non-volatile and 190KB runtime memory. The 2711-K6C5 PanelView has a replaceable backlight of 2711-NL3 for Series A and Series B units, and 2711-NL5 for Series C units.

The RS-232 (DH-485 protocol) Terminal connects to MicroLogix and SLC 500 controllers using DH-485 protocol. The point-to-point configuration uses a separate connection for high-priority data. They can also connect to a DH-485 network using the AIC+ module.

This process can also be done through the RS-232 Printer port, the standard RS-232/DH-485 port, or with a PC memory card such as the 2711-NM232.

FAQ for 2711-K6C5

Can you replace the time clock in the 2711-K6C5?


Yes, you can replace Ser A and Ser B units with 2711-NB3 and for Series C units use the 2711-NB4 battery.

What is the display size of the 2711-K6C5?


The 2711-K6C5 has a display size of 5 in.

Is the backlight replaceable for the 2711-K6C5?


Yes, this Panelview 600 backlight can be replaced with 2711-NL3 for Ser A or Ser B and the 2711-NL5 for Ser C units.

What type of display does the 2711-K6C5 have?


The 2711-K6C5 has a color display type.

Does the 2711-K6C5 have a RS-232 Print?


No, the 2711-K6C5 does not have an RS-232 Print.

What is the price of a 2711-K6C5 Allen Bradley PanelView Standard 600 Terminal?


Submit quote request, send us an email, or call 800-730-0292 for our best price.

Does DO Supply offer repair services for the 2711-K6C5 Allen Bradley PanelView Standard 600 Terminal?


Yes, DO Supply offers repair services for a variety of Allen-Bradley products, such as the 2711-K6C5. For more information or to request a repair quote, please click here.

What are the embedded memory of the 2711-K6C5?


The 2711-K6C5 has 240KB non-volatile memory and 190KB application runtime memory.

What is the power supply requirement of the 2711-K6C5?


The 2711-K6C5 is powered by an external AC voltage supply range of 85-264VAC.

How many function keys does the 2711-K6C5 have?


The 2711-K6C5 is provided with Ten (10) function keys.

Technical Description of 2711-K6C5

This Panelview 600 terminal comes with a RS-232 (DH-485) Communication Port.  This Panelview has a color display with keypad input and 85-264 VAC power. 
Repairs
Type Lead Time Price Action
Repair Service 2-4 weeks $2042cartAdd to Cart

We can Repair your Panelview 600

We have a team of highly trained technicians that can repair your panelview quickly at a great low price. To get a repair quote call 1-800-730-0292 or email sales@dosupply.com. Some of the benefits of our repair process includes:

  • Repair Turnaround of 3-5 Days for Most Panelviews
  • Rush Repairs of 1-3 Days
  • Fast Return of Your Repair via UPS, FedEx, or DHL.
  • If the item is not repairable, you can choose to have it returned to you free of charge or it can be counted as an exchange credit toward a refurbished or surplus unit if available.
  • Wide range of repairs that can be completed by our highly skilled technicians as shown below.

We Can Repair Your Hardware failures including:

  • Communication Hardware Faults (Ethernet/IP, DH-485, DH+, ControlNet, and RS-232)
  • Broken Toushcreen/Keypads
  • Broken Glass
  • Displays (Dead/Dim/Lines/Missing Pixels)
  • Dead Backlights
  • Broken Housing/Bezel
  • Power Board Failures
Type Lead Time Price Action
Repair Service 2-4 weeks $2042cartAdd to Cart

We can Repair your Panelview 600

We have a team of highly trained technicians that can repair your panelview quickly at a great low price. To get a repair quote call 1-800-730-0292 or email sales@dosupply.com. Some of the benefits of our repair process includes:

  • Repair Turnaround of 3-5 Days for Most Panelviews
  • Rush Repairs of 1-3 Days
  • Fast Return of Your Repair via UPS, FedEx, or DHL.
  • If the item is not repairable, you can choose to have it returned to you free of charge or it can be counted as an exchange credit toward a refurbished or surplus unit if available.
  • Wide range of repairs that can be completed by our highly skilled technicians as shown below.

We Can Repair Your Hardware failures including:

  • Communication Hardware Faults (Ethernet/IP, DH-485, DH+, ControlNet, and RS-232)
  • Broken Toushcreen/Keypads
  • Broken Glass
  • Displays (Dead/Dim/Lines/Missing Pixels)
  • Dead Backlights
  • Broken Housing/Bezel
  • Power Board Failures
Revisions

Please refer to the manual for more information about the 2711-K6C5 such as the wiring diagrams, data sheets and migration or obsolescence details.

Revision Part # Also Known as Availability
2711-K6C5 Ser A
2711-K6C5/A, Series A, Rev A Request Quote
2711-K6C5 Ser B
2711-K6C5/B, Series B, Rev B Request Quote
2711-K6C5 Ser C
2711-K6C5/C, Series C, Rev C Request Quote
2711-K6C5X
2711-K6C5/X, Series X, Rev X Request Quote

Common misspellings:
  • 27l1-K6C5
  • 271l-K6C5
  • 2711K6C5
PDF
2711-K6C5 PDF
Dimensions

Dimension For 2711-K6C5

Size 6 inch
Input Type Keypad and Touch
Panel Cutout Height 167 mm (6.57 in)
Panel Cutout Width 264 mm (10.39 in)
Terminal Height 192 mm (7.55 in)
Terminal Width 290 mm (11.40 in)
Terminal Overall Depth 116 mm (4.57 in)
Terminal Mounted Depth 91 mm (3.60 in)
Resolutions

Resolutions For 2711-K6C5

Size 6 inch
Input Type Keypad, Keypad and Touch
Display Type Color active matrix TFT
Display Size (Diagonal) 6 in.
Viewing Area 115 x 86 mm (4.54 x 3.4 in.
Display Resolution 320 x 234
Reviews

Reviews for 2711-K6C5

Internal Review

"The 2711-K6C5 is part of the PanelView 600 operator terminal. This PanelView terminal features an RS232 interface that supports a DH485 communication protocol. This PanelView can only support peer to peer communication. Compared to the 2711-K6C20 which supports Ethernet interface networked, multi-client topology, the 2711-K6C5 is limited to communication exchange between a single controller. If intended to be used for a networked topology, an external network interface card may be used with the 2711-K6C5. " -DO Supply Tech