Free UPS Ground on All Orders!
Request a
Fast Quote
Account
Cart
Quote
+1 (919) 205-4392
Allen Bradley Panelview 600 2711-T6C20L1

Product image is representative; revision or series may vary. Contact us to request a specific version.

2711-T6C20L1

|
Need a Specific Revision?

The Allen-Bradley/Rockwell Automation 2711-T6C20L1 terminal is a Panelview 600 series operator terminal. This operator terminal runs on 18 to 32 Volts DC of operating voltage. The 2711-T6C20L1 operator terminal is a touchscreen type of operator terminal that uses a 6-inch touchscreen for input and control functions. This touchscreen can support color graphics. The 2711-T6C20L1 operator terminal's touchscreen should only be operated by the users with their fingertips or with an approved stylus that is not too sharp.

In Stock
Ships from Raleigh, NC
2 Year DO Supply Warranty
Not an Authorized Distributor: DO Supply is not an authorized distributor for listed manufacturers or tradenames and therefore the manufacturer's warranty does not apply. All of our products come with DO Supply's 2-year warranty.
Learn more
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Technical specifications for 2711-T6C20L1

ManufacturerAllen Bradley
Product TypePanelView 600 Standard Operator Terminals
Product LinePanelview 600
Part Number2711-T6C20L1
UPC611320575309
Weight2.00 lbs (0.91 kg)
BacklightField replaceable 50,000 hr 1/2 life at 25 °C (77 °F)
Input TypeTouch
Product FamilyPanelView Standard Terminals
Display TypeActive Matrix TFT with Cold Cathode Fluorescent (CCF) Backlight
Display Area115 x 87 mm (4.54 x 3.43 in.)
Resolution320 x 240
Touchscreen128 (16 columns x 8 rows)
Touch Cell size20 x 30 pixels
Application memory190 KB application runtime 240 KB nonvolatile memory (application objects plus text and bitmaps)
Communication portsEthernet; RS232 (printer)
Input Voltage range18…32V DC (24V DC nominal supply)
Operating Temperature0…55 ° C (32…131 ° F)
Heat Dissipation24 W max (1.0 A at 24V DC)
Display Size5 inches
Display ColorColor
CommunicationEtherNet/IP and RS-232 Printer
Input Power18 to 32 Volts DC
Memory240 KB
Communication CableEthernet cable
SeriesA, B, C, D, E, F, G, H, I, J, K, and L
Product Lifecycle Status*Discontinued/Obsolete

* The Allen Bradley 2711-T6C20L1 has been discontinued by the manufacturer, however we specialize in obsolete parts and can likely still supply surplus and/or refurbished replacement 2711-T6C20L1 units instead of migration.

View as PDF
Request a Repair

The Allen-Bradley 2711-T6C20L1 is a PanelView operator terminal with a 6-inch, colored display and touch operator interface. This operator terminal is a discontinued product that is used to implement machine and process automation by providing real-time monitoring of instruments installed along the system and permit control by allowing operators touch the intended object to implement the appropriate command.

The 2711-T6C20L1 also has a single Ethernet interface, supporting 10/100 Mbps with auto-negotiation feature. With the single Ethernet port, it supports linear topology however, Device Level Ring (DLR) may be achieved with the use of an external switch such as Allen-Bradley ETAP and other similar devices. It has a second port which is an RS232 port with 9-pin sub-D connector used for communicating with an alarm and event printer.

This operator terminal is intended to be wired to an external DC power supply with output range of 18-32VDC. Additionally, it has a power consumption of 24 W max. (1.0A @ 24V DC) and heat dissipation of 32 Watts (107 BTU/HR). This operator terminal can be configured to communicate with legacy and mature products such as the PLC5, SLC500 and MicroLogix controllers as well as modern controllers including the CompactLogix and ControlLogix controllers.

The unit is designed to be installed in an IP54 or IP65 (NEMA Type 12, 13, NEMA 4X - indoor use only) enclosure. On the back of the device, there is a reset button to reinitiate the start of the application that is running on the display without terminating the power supply to the unit. Always press this button with a narrow, non-conductive tool. The 2711-T6C20L1 can store application backup on the memory card that is inserted in the back part of the device. The unit is shipped with approximate dimensions of 185 millimeters x 152 millimeters x 96 millimeters. During the installation, leave enough space around it for mounting, maintenance, air circulation, and memory card and legend label installation. Tighten the mounting screws in a way to make a tight and even gasket seal contact.

Revision Part #Also known as
2711-T6C20L1 Ser A2711-T6C20L1/A, Series A, Rev A
2711-T6C20L1 Ser B2711-T6C20L1/B, Series B, Rev B
2711-T6C20L1X2711-T6C20L1/X, Series X, Rev X
Don't see your particular revision? Contact us now.