2711C-K2M | Allen Bradley Panelview Component

×

2711C-K2M

Rated 4.9 with 15 reviews
About | Product Specifications

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.


credit cards accepted
better business bureau

2711C-K2M

Description: The Allen-Bradley 2711C-K2M terminal is an operator terminal from the Panelview Component series of operator terminals. Its input option is a keypad with numeric and function keys. The 2711C-K2M operator terminal?s screen is only 2 inches wide and it only supports monochrome graphics. It has a yellow and green status indicator light that has a minimum half life of 50,000 hours and that is not replaceable. The 2711C-K2M operator terminal has a USB device port for programming and its input voltage range is from 18 to 30 Volts DC.
Available Now
Request a quote for 2711C-K2M

Description: The Allen-Bradley 2711C-K2M terminal is an operator terminal from the Panelview Component series of operator terminals. Its input option is a keypad with numeric and function keys. The 2711C-K2M operator terminal?s screen is only 2 inches wide and it only supports monochrome graphics. It has a yellow and green status indicator light that has a minimum half life of 50,000 hours and that is not replaceable. The 2711C-K2M operator terminal has a USB device port for programming and its input voltage range is from 18 to 30 Volts DC.
About | Products Specs

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

disclaimer
credit cards
better business bureau

Warranty: 1 year DO Supply Warranty Included
Shipping: Worldwide shipping via UPS, DHL, and TNT
Repairs: We offer repair service for the 2711C-K2M.
Exchange: Exchange credit for your defective unit available.
Conditions: We sell preowned surplus and refurbished parts.

To speak to a sales representative for pricing & lead time:


Rated 4.9 with 15 reviews

    Technical Specifications for 2711C-K2M

ManufacturerRockwell Automation
BrandAllen-Bradley
Product LineComponent Terminal
SeriesC200
Part Number/Catalog No.2711C-K2M
Display Size2 in.
Display ColorMonochrome
Input TypeKeypad
Power24VDC
Resolution122 x 32 pixels
Power Consumption5 Watts
Product Lifecycle Status*Discontinued/Obsolete

*The Allen Bradley 2711C-K2M has been discontinued by the manufacturer, however we specialize in obsolete parts and can likely still supply surplus and/or refurbished replacement 2711C-K2M units instead of migration.

ManufacturerRockwell Automation
BrandAllen-Bradley
Product LineComponent Terminal
SeriesC200
Part Number/Catalog No.2711C-K2M
Display Size2 in.
Display ColorMonochrome
Input TypeKeypad
Power24VDC
Resolution122 x 32 pixels
Power Consumption5 Watts
Product Lifecycle Status*Discontinued/Obsolete

*The Allen Bradley 2711C-K2M has been discontinued by the manufacturer, however we specialize in obsolete parts and can likely still supply surplus and/or refurbished replacement 2711C-K2M units instead of migration.

s

About 2711C-K2M

The Allen-Bradley 2711C-K2M is a PanelView Component C200 Terminal providing visualization and control for low-end applications that use Ethernet or serial communications. This device can connect to the PowerFlex 4 drives and the preferred range of controllers include the Allen-Bradley MicroLogix and Micro800 families. These include Analog Input Modules 1771-1E and 1771-1F. The panel installation and maintenance can be made easy with the quick-lever clips and mounting clamps. This C200 terminal's easy interface lets you design your own application and simultaneously adjust the terminal settings as well. You can also check history, alarm messages directly through the interface panel of 2711C-K2M.



2711C-K2M has an input voltage of 18 to 30 Volts DC, or 24 Volts DC nominally. Be sure to never connect commons together when using this device. With a power consumption of 5 Watts, it can be programmed easily with a USB device as well. The operator input has a total of 10 functional keys and backlight time of more than 50,000 hours best suited for C200 and C300 terminals. You don't have to download the application first, instead, the results of the design can be seen directly on the terminal itself.

The power requirements for this product are the 18 to 30 Volts DC. It supports RS-232 (DH-485), RS-232 (DF1), RS-485 as communication ports which are available from Siemens as well as Modbus through various vendors. Weighing around 0.65 pounds and with a display area of 49 x 14 mm (1.93 x 0.55 in.), it is quite handy and easy to use.

Technical Description of 2711C-K2M

Allen Bradley PanelView Component, C200 Model, 2 in., Monochrome Display

Repair Services for 2711C-K2M

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 2711C-K2M. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Revisions for 2711C-K2M

Please refer to the manual for more information about the 2711C-K2M such as the wiring diagrams, data sheets and migration or obsolescence details.

Revision Part # Also Known as Availability
2711C-K2M Ser A
2711C-K2M/A, Series A, Rev A Request Quote
2711C-K2M Ser B
2711C-K2M/B, Series B, Rev B Request Quote
2711C-K2MX
2711C-K2M/X, Series X, Rev X Request Quote
Common misspellings:
  • 27l1C-K2M
  • 271lC-K2M
  • 2711CK2M

Dimensions For 2711C-K2M

Size 2 inch
Input Type C200 Function Key
Panel Cutout Height 64.0 ± 1.0 mm (2.52 ± 0.04 in)
Panel Cutout Width 99.0 ± 1.0 mm (3.90 ±0.04 in)
Terminal Height 80 mm (3.15 in)
Terminal Width 116 mm (4.57 in)
Terminal Overall Depth 54 mm (2.13 in)
Terminal Mounted Depth 49 mm (1.93 in)

Dimensions For 2711C-K2M

Resolutions For 2711C-K2M

Size 2 inch
Input Type C200 Function Key
Display Type Monochrome transflective STN passive matrix
Display Size (Diagonal) 2 in.
Viewing Area 49 x 14 mm (1.93 x .55 in.)
Display Resolution 122 x 32
About

Technical Specifications for 2711C-K2M

ManufacturerRockwell Automation
BrandAllen-Bradley
Product LineComponent Terminal
SeriesC200
Part Number/Catalog No.2711C-K2M
Display Size2 in.
Display ColorMonochrome
Input TypeKeypad
Power24VDC
Resolution122 x 32 pixels
Power Consumption5 Watts
Product Lifecycle Status*Discontinued/Obsolete
ManufacturerRockwell Automation
BrandAllen-Bradley
Product LineComponent Terminal
SeriesC200
Part Number/Catalog No.2711C-K2M
Display Size2 in.
Display ColorMonochrome
Input TypeKeypad
Power24VDC
Resolution122 x 32 pixels
Power Consumption5 Watts
Product Lifecycle Status*Discontinued/Obsolete

*The Allen Bradley 2711C-K2M has been discontinued by the manufacturer, however we specialize in obsolete parts and can likely still supply surplus and/or refurbished replacement 2711C-K2M units instead of migration.

About 2711C-K2M

The Allen-Bradley 2711C-K2M is a PanelView Component C200 Terminal providing visualization and control for low-end applications that use Ethernet or serial communications. This device can connect to the PowerFlex 4 drives and the preferred range of controllers include the Allen-Bradley MicroLogix and Micro800 families. These include Analog Input Modules 1771-1E and 1771-1F. The panel installation and maintenance can be made easy with the quick-lever clips and mounting clamps. This C200 terminal's easy interface lets you design your own application and simultaneously adjust the terminal settings as well. You can also check history, alarm messages directly through the interface panel of 2711C-K2M.



2711C-K2M has an input voltage of 18 to 30 Volts DC, or 24 Volts DC nominally. Be sure to never connect commons together when using this device. With a power consumption of 5 Watts, it can be programmed easily with a USB device as well. The operator input has a total of 10 functional keys and backlight time of more than 50,000 hours best suited for C200 and C300 terminals. You don't have to download the application first, instead, the results of the design can be seen directly on the terminal itself.

The power requirements for this product are the 18 to 30 Volts DC. It supports RS-232 (DH-485), RS-232 (DF1), RS-485 as communication ports which are available from Siemens as well as Modbus through various vendors. Weighing around 0.65 pounds and with a display area of 49 x 14 mm (1.93 x 0.55 in.), it is quite handy and easy to use.

Technical Description of 2711C-K2M

Allen Bradley PanelView Component, C200 Model, 2 in., Monochrome Display
Repairs
Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 2711C-K2M. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 2711C-K2M. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Revisions

Please refer to the manual for more information about the 2711C-K2M such as the wiring diagrams, data sheets and migration or obsolescence details.

Revision Part # Also Known as Availability
2711C-K2M Ser A
2711C-K2M/A, Series A, Rev A Request Quote
2711C-K2M Ser B
2711C-K2M/B, Series B, Rev B Request Quote
2711C-K2MX
2711C-K2M/X, Series X, Rev X Request Quote

Common misspellings:
  • 27l1C-K2M
  • 271lC-K2M
  • 2711CK2M
PDF
2711C-K2M PDF
Dimensions

Dimension For 2711C-K2M

Size 2 inch
Input Type C200 Function Key
Panel Cutout Height 64.0 ± 1.0 mm (2.52 ± 0.04 in)
Panel Cutout Width 99.0 ± 1.0 mm (3.90 ±0.04 in)
Terminal Height 80 mm (3.15 in)
Terminal Width 116 mm (4.57 in)
Terminal Overall Depth 54 mm (2.13 in)
Terminal Mounted Depth 49 mm (1.93 in)
Resolutions

Resolutions For 2711C-K2M

Size 2 inch
Input Type C200 Function Key
Display Type Monochrome transflective STN passive matrix
Display Size (Diagonal) 2 in.
Viewing Area 49 x 14 mm (1.93 x .55 in.)
Display Resolution 122 x 32