The 2711C-T6M is an Allen-Bradley PanelView Component C600 Terminal. Primarily, this 2711C-T6M PanelView Component C600 Terminal serves as an operator interface, through which the user can monitor and control the devices attached to the controller within the system. As a C600 model terminal, its design features a touch display, a diagnostic status indicator, and multiple communication ports. The 2711C-T6M also comes equipped with a mounting slot. The 2711C-T6M’s communication ports include a 10/100 Mbit Ethernet port, an RS-422 or RS-485 port, an RS-232 serial port, USB device and host ports and a slot for a secure digital card. The ethernet port is compatible with either static IP addresses or a Dynamic Host Configuration Protocol assigned an IP address. The user can create HMI applications using a web application installed on a computer, which connects to the 2711C-T6M. When connecting to a browser, the user should use the USB port or an Ethernet network connection via the appropriate communication ports on the 2711C-T6M. It is important to note, the 2711C-T6M uses the following IP address for the system’s emulator: 169.254.253.8.
Measuring at 6 inches, the 2711C-T6M has a monochrome transmissive FSTN passive matrix display with a 320x240 pixel resolution. This 2711C-T6M terminal’s display area is 4.53 x 3.39 inches or 115 x 86 millimeters and it uses a CCFL backlight. As with all Component C600 terminals, the 2711C-T6M has a backlight with a minimum 50,000 hour or 5-year life, which is not replaceable. Additionally, the display's brightness cannot be adjusted. The 2711C-T6M has a real-time clock that is equipped with a battery backup. Consuming an 18-Watt maximum, or 0.75 amps when operating at 24 Volts DC, the 2711C-T6M requires an input voltage ranging from 18 to 30 Volts DC or 24 Volts DC nominally. It dissipates 32 BTU per hour. The entire terminal weighs 1.48 pounds or 0.68 kilograms. It is 6-inches high, 8.23-inches wide, and 2.25-inches deep, or 154 x 209 x 57 millimeters. When installing the 2711C-T6M, it is important to consider the terminal’s environmental requirements. During operating, the 2711C-T6M will be between 32 to 122 degrees Fahrenheit or 0 to 50 degrees Celsius. If the terminal is non-operational, it will withstand temperatures ranging from 13 to 158 degrees Fahrenheit or -25 to 70 degrees Celsius. The humidity in the environment may range from 0 to 95% non-condensing. As an enclosed terminal, the 2711C-T6M has an enclosure type with the following ratings: NEMA/UL Type 4X (indoor) 12, 13 and IEC IP54, IP65. The 2711C-T6M is durable and can withstand 15G of shock for 11milliseconds when operating or 30G of shock for 11 milliseconds when not in operation. It can withstand vibrations of 2G at anywhere from 10 to 500 Hertz.
FAQ for 2711C-T6M
Question: Is the backlight in the 2711C-T6M replaceable?
Answer: The backlight of the 2711C-T6M is not replaceable but the minimum lifespan of the backlight is around 50,000 hours.
Question: What is the preferred controller of the 2711C-T6M?
Answer: The preferred controllers of the 2711C-T6M are MicroLogix, SLC, and Micro800 controllers.
Question: Can this module be purchased with a warranty?
Answer: Yes, the 2711C-T6M comes with a free one-year warranty from DO Supply, Inc.
Question: Where can I send the 2711C-T6M to be repaired?
Answer: DO Supply, Inc. offers a variety of repair services for the 2711C-T6M.
Question: What is this module’s heat dissipation?
Answer: The 2711C-T6M dissipates around 32 BTU of heat every hour.
Question: What type of input does this module have?
Answer: The 2711C-T6M has a touchscreen input.
Repair Services for 2711C-T6M
||$790||Add to Cart |
Our highly skilled technicians can repair your 2711C-T6M. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.
Revisions for 2711C-T6M
Please refer to the manual for more information about the 2711C-T6M such as the wiring diagrams, data sheets,
firmware information and migration or obsolescence details.