2711P-B10C15A1 - In Stock | Allen Bradley Panelview Plus 1000

×

2711P-B10C15A1

Rated 4.4 with 21 reviews
About | Product Specifications | FAQ

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.


credit cards accepted
better business bureau

2711P-B10C15A1

Description: The Allen-Bradley 2711P-B10C15A1 is a Panelview Plus 1000 Operator Terminal. This operator terminal is powered by an external 85-264V AC supply voltage and has a 10.4-inch colored display with embedded ControlNet, Ethernet, RS232, USB communication ports. This operator terminal has a keypad and touchscreen input interface.
In Stock Ships Today
Request a quote for 2711P-B10C15A1

Description: The Allen-Bradley 2711P-B10C15A1 is a Panelview Plus 1000 Operator Terminal. This operator terminal is powered by an external 85-264V AC supply voltage and has a 10.4-inch colored display with embedded ControlNet, Ethernet, RS232, USB communication ports. This operator terminal has a keypad and touchscreen input interface.
About | Products Specs | FAQ

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

disclaimer
credit cards
better business bureau

Warranty: 1 year DO Supply Warranty Included
Shipping: Worldwide shipping via UPS, DHL, and TNT
Repairs: We offer repair service for the 2711P-B10C15A1.
Exchange: Exchange credit for your defective unit available.
Conditions: We sell preowned surplus and refurbished parts.

To speak to a sales representative for pricing & lead time:


Rated 4.4 with 21 reviews

    Technical Specifications for 2711P-B10C15A1

Manufacturer:Rockwell Automation
Input Frequency:47…63 Hz
Input Voltage range:85…264V AC
Integrated ports:Ethernet, RS-232, ControlNet, 1 USB host
Internal memory:128MB Flash Memory / 128 MB Random Access Memory
Touch:Analog Resistive
Keypad function keys:F1 to F16, K1 to K16; 0…9, Special Characters, Backspace, Enter, Left and Right Tab, keys, Shift keys
Keypad:1 million presses
Resolution:640 x 400
Display Area:210 x 131 mm (8.27 x 5.17 in.)
Lifecycle status:Discontinued
Display Type:Color active matrix, thin-film transistor (TFT) with liquid crystal display (LCD)
Operator Input:Keypad / Touch
Part Number:2711P-B15C4A1
Product Type:PanelView Plus 1000 Operator Terminals
Product Family:PanelView Plus Operator Terminals
BrandAllen-Bradley
BacklightCCFL 50,000 hours life, min
Display Size10.4 inches
Part Number/Catalog No.2711P-B10C15A1
Product LinePanelview Plus 1000
Display ColorColor
Input TypeKeypad/Touchscreen
CommunicationControlNet
Input Power85-264 VAC
Memory64 MB
Communication Cable1747-KFC15A
Shipping Weight10 lbs.
Shipping Dimensions18 x 14 x 8 in
SeriesSeries A, B, C, D, and F
Product Lifecycle Status*Discontinued/Obsolete

*The Allen Bradley 2711P-B10C15A1 has been discontinued by the manufacturer, however we specialize in obsolete parts and can likely still supply surplus and/or refurbished replacement 2711P-B10C15A1 units instead of migration.

Manufacturer:Rockwell Automation
Input Frequency:47…63 Hz
Input Voltage range:85…264V AC
Integrated ports:Ethernet, RS-232, ControlNet, 1 USB host
Internal memory:128MB Flash Memory / 128 MB Random Access Memory
Touch:Analog Resistive
Keypad function keys:F1 to F16, K1 to K16; 0…9, Special Characters, Backspace, Enter, Left and Right Tab, keys, Shift keys
Keypad:1 million presses
Resolution:640 x 400
Display Area:210 x 131 mm (8.27 x 5.17 in.)
Lifecycle status:Discontinued
Display Type:Color active matrix, thin-film transistor (TFT) with liquid crystal display (LCD)
Operator Input:Keypad / Touch
Part Number:2711P-B15C4A1
Product Type:PanelView Plus 1000 Operator Terminals
Product Family:PanelView Plus Operator Terminals
BrandAllen-Bradley
BacklightCCFL 50,000 hours life, min
Display Size10.4 inches
Part Number/Catalog No.2711P-B10C15A1
Product LinePanelview Plus 1000
Display ColorColor
Input TypeKeypad/Touchscreen
CommunicationControlNet
Input Power85-264 VAC
Memory64 MB
Communication Cable1747-KFC15A
Shipping Weight10 lbs.
Shipping Dimensions18 x 14 x 8 in
SeriesSeries A, B, C, D, and F
Product Lifecycle Status*Discontinued/Obsolete

*The Allen Bradley 2711P-B10C15A1 has been discontinued by the manufacturer, however we specialize in obsolete parts and can likely still supply surplus and/or refurbished replacement 2711P-B10C15A1 units instead of migration.

s

About 2711P-B10C15A1

The 2711P-B15C4A1 is a PanelView 1000 operator terminal that is manufacture by Allen-Bradley. This electronic device has a compact and scalable assembly, allowing operator to monitor and control the connected machine in real-time.

The 2711P-B15C4A1 comes with a 10.4-inches colored graphic screen with display area of 211 x 158 mm (8.3 x 6.2 in.) and pixel resolution of 640 x 480. It is installed with an internal backlight that is estimated to operate at a minimum of 50,000 hours.

The 2711P-B15C4A1 has a dual interface capability. This operator terminal may be operated using the embedded keypad that is composed of Function, numeric and navigation keys. These keys are designed to be operated up to 1 million presses via an actuation force of 340 g. The other input method is via the analog resistive Touch sensitive screen. Similarly, the expected actuation life of the touch screen interface is 1 million actuations with a slightly lower recommended actuation force of 10…110 g.

The 2711P-B15C4A1 comes with a variety of communication ports such as ControlNet, Ethernet and RS232 interfaces. These communication ports functions independently and may be operated individually and communication with different devices simultaneously.

The 2711P-B15C4A1 achieves IP54, IP65, NEMA 4X protection rating when installed to an enclosure of equivalent rating. This operator terminal is installed surface mounted to the enclosure in horizontal orientation. Required panel cutout is 224 (8.8) (H) x 375 (14.75) (W).

This HMI has an internal 32 MB flash memory and runtime memory of 64 Random Access Memory.

This unit has an internal backlight replacement part number of 2711P-RL10C. The approximate shipping weight and dimensions are 10 lbs. and 18 x 14 x 8 in. The ControlNet terminals are able to connect to single or multiple controllers on a unique ControlNet network. They support both scheduled and unscheduled access to controller data, as well as support for redundant cabling. The ControlNet terminals support symbolic CIP addressing when communicating with a ControlLogix system. Every terminal offers a Network Access port for local access to the ControlNet network.

FAQ for 2711P-B10C15A1

What are the communication ports available with the 2711P-B15C4A1?


The 2711P-B15C4A1 has ControlNet, Ethernet and RS232 interface. It also has USB ports for connecting external peripherals.

What is the power supply requirement of the 2711P-B15C4A1?


The 2711P-B15C4A1 is powered using an external voltage range of 85-264VAC.

What is the screen size of the 2711P-B15C4A1?


The 2711P-B15C4A1 has 10.4 colored display screen.

Technical Description of 2711P-B10C15A1

Panelview Plus 1000 Touchscreen/Keypad 10.4 in Color Display with ControlNet Communication AC Power Logic Module with 64MB

Repair Services for 2711P-B10C15A1

Type Lead Time Price Action
Repair Service 2-4 weeks $3012cartAdd to Cart

We Can Repair Your Panelview Plus 1000

We have a team of highly trained technicians that can repair your Panelview Plus quickly at a great low price. To get a repair quote call 1-800-730-0292 or email sales@dosupply.com. Some of the benefits of our repair process includes:

  • Repair Turnaround of 3-5 Days for Most Panelview Plus
  • Rush Repairs of 1-3 Days
  • Fast Return of Your Repair via UPS, FedEx, or DHL.
  • If the item is not repairable, you can choose to have it returned to you free of charge or it can be counted as an exchange credit toward a refurbished or surplus unit if available.
  • Wide range of repairs that can be completed by our highly skilled technicians as shown below.
  • All Repairs Come with Our 1-Year Warranty!

Repair Capabilities

We Can Repair Your Hardware Failures Including:

  • Communication Failures
  • Broken Toushcreens/Keypads
  • Broken Glass
  • Displays (Dead/Dim/Lines/Missing Pixels)
  • Dead Backlights
  • Broken Housing/Bezel
  • Power Board Failures

Start UP Error Codes and Messages:

  • RAM Test- Error 1
  • Internal CF- Error 23
  • CRC Check- Error 24
  • Watchdog Test- Error 30
  • Stuck Key- Error 31
  • Stuck Touch- Error 31.5
  • Battery Test- Error 32
  • NVRAM Access- Error 33.5
  • EXE Check- Error 40
  • External CF- Error 50

Revisions for 2711P-B10C15A1

Please refer to the manual for more information about the 2711P-B10C15A1 such as the wiring diagrams, data sheets and migration or obsolescence details.

Revision Part # Also Known as Availability
2711P-B10C15A1 Ser A
2711P-B10C15A1/A, Series A, Rev A Request Quote
2711P-B10C15A1X
2711P-B10C15A1/X, Series X, Rev X Request Quote
Common misspellings:
  • 27l1P-B10C15A1
  • 271lP-B10C15A1
  • 2711P-810C15A1
  • 2711P-Bl0C15A1
  • 2711P-B1oC15A1
  • 2711P-B10Cl5A1
  • 2711P-B10C15Al
  • 2711PB10C15A1

Reviews for 2711P-B10C15A1

Internal Review

"The 2711P-B15C4A1 is a PanelView Plus operator terminal. This operator terminal is a more modern version of operator terminals with a slim and compact body. This HMI has a large screen with size of 10.4 inches, ideal for application that require graphics and control system with medium complexity. Additionally, this HMI offers input options as it may be operated through the embedded keypad or via the touch screen interface. " -DO Supply Tech

Dimensions For 2711P-B10C15A1

Size
Input Type
Panel Cutout Height in mm
Panel Cutout Width in mm
Terminal Height in mm
Terminal Width in mm
Terminal Overall Depth in mm
Terminal Mounted Depth in mm

Dimensions For 2711P-B10C15A1

Resolutions For 2711P-B10C15A1

About

Technical Specifications for 2711P-B10C15A1

Manufacturer:Rockwell Automation
Input Frequency:47…63 Hz
Input Voltage range:85…264V AC
Integrated ports:Ethernet, RS-232, ControlNet, 1 USB host
Internal memory:128MB Flash Memory / 128 MB Random Access Memory
Touch:Analog Resistive
Keypad function keys:F1 to F16, K1 to K16; 0…9, Special Characters, Backspace, Enter, Left and Right Tab, keys, Shift keys
Keypad:1 million presses
Resolution:640 x 400
Display Area:210 x 131 mm (8.27 x 5.17 in.)
Lifecycle status:Discontinued
Display Type:Color active matrix, thin-film transistor (TFT) with liquid crystal display (LCD)
Operator Input:Keypad / Touch
Part Number:2711P-B15C4A1
Product Type:PanelView Plus 1000 Operator Terminals
Product Family:PanelView Plus Operator Terminals
BrandAllen-Bradley
BacklightCCFL 50,000 hours life, min
Display Size10.4 inches
Part Number/Catalog No.2711P-B10C15A1
Product LinePanelview Plus 1000
Display ColorColor
Input TypeKeypad/Touchscreen
CommunicationControlNet
Input Power85-264 VAC
Memory64 MB
Communication Cable1747-KFC15A
Shipping Weight10 lbs.
Shipping Dimensions18 x 14 x 8 in
SeriesSeries A, B, C, D, and F
Product Lifecycle Status*Discontinued/Obsolete
Manufacturer:Rockwell Automation
Input Frequency:47…63 Hz
Input Voltage range:85…264V AC
Integrated ports:Ethernet, RS-232, ControlNet, 1 USB host
Internal memory:128MB Flash Memory / 128 MB Random Access Memory
Touch:Analog Resistive
Keypad function keys:F1 to F16, K1 to K16; 0…9, Special Characters, Backspace, Enter, Left and Right Tab, keys, Shift keys
Keypad:1 million presses
Resolution:640 x 400
Display Area:210 x 131 mm (8.27 x 5.17 in.)
Lifecycle status:Discontinued
Display Type:Color active matrix, thin-film transistor (TFT) with liquid crystal display (LCD)
Operator Input:Keypad / Touch
Part Number:2711P-B15C4A1
Product Type:PanelView Plus 1000 Operator Terminals
Product Family:PanelView Plus Operator Terminals
BrandAllen-Bradley
BacklightCCFL 50,000 hours life, min
Display Size10.4 inches
Part Number/Catalog No.2711P-B10C15A1
Product LinePanelview Plus 1000
Display ColorColor
Input TypeKeypad/Touchscreen
CommunicationControlNet
Input Power85-264 VAC
Memory64 MB
Communication Cable1747-KFC15A
Shipping Weight10 lbs.
Shipping Dimensions18 x 14 x 8 in
SeriesSeries A, B, C, D, and F
Product Lifecycle Status*Discontinued/Obsolete

*The Allen Bradley 2711P-B10C15A1 has been discontinued by the manufacturer, however we specialize in obsolete parts and can likely still supply surplus and/or refurbished replacement 2711P-B10C15A1 units instead of migration.

About 2711P-B10C15A1

The 2711P-B15C4A1 is a PanelView 1000 operator terminal that is manufacture by Allen-Bradley. This electronic device has a compact and scalable assembly, allowing operator to monitor and control the connected machine in real-time.

The 2711P-B15C4A1 comes with a 10.4-inches colored graphic screen with display area of 211 x 158 mm (8.3 x 6.2 in.) and pixel resolution of 640 x 480. It is installed with an internal backlight that is estimated to operate at a minimum of 50,000 hours.

The 2711P-B15C4A1 has a dual interface capability. This operator terminal may be operated using the embedded keypad that is composed of Function, numeric and navigation keys. These keys are designed to be operated up to 1 million presses via an actuation force of 340 g. The other input method is via the analog resistive Touch sensitive screen. Similarly, the expected actuation life of the touch screen interface is 1 million actuations with a slightly lower recommended actuation force of 10…110 g.

The 2711P-B15C4A1 comes with a variety of communication ports such as ControlNet, Ethernet and RS232 interfaces. These communication ports functions independently and may be operated individually and communication with different devices simultaneously.

The 2711P-B15C4A1 achieves IP54, IP65, NEMA 4X protection rating when installed to an enclosure of equivalent rating. This operator terminal is installed surface mounted to the enclosure in horizontal orientation. Required panel cutout is 224 (8.8) (H) x 375 (14.75) (W).

This HMI has an internal 32 MB flash memory and runtime memory of 64 Random Access Memory.

This unit has an internal backlight replacement part number of 2711P-RL10C. The approximate shipping weight and dimensions are 10 lbs. and 18 x 14 x 8 in. The ControlNet terminals are able to connect to single or multiple controllers on a unique ControlNet network. They support both scheduled and unscheduled access to controller data, as well as support for redundant cabling. The ControlNet terminals support symbolic CIP addressing when communicating with a ControlLogix system. Every terminal offers a Network Access port for local access to the ControlNet network.

FAQ for 2711P-B10C15A1

What are the communication ports available with the 2711P-B15C4A1?


The 2711P-B15C4A1 has ControlNet, Ethernet and RS232 interface. It also has USB ports for connecting external peripherals.

What is the power supply requirement of the 2711P-B15C4A1?


The 2711P-B15C4A1 is powered using an external voltage range of 85-264VAC.

What is the screen size of the 2711P-B15C4A1?


The 2711P-B15C4A1 has 10.4 colored display screen.

Technical Description of 2711P-B10C15A1

Panelview Plus 1000 Touchscreen/Keypad 10.4 in Color Display with ControlNet Communication AC Power Logic Module with 64MB
Repairs
Type Lead Time Price Action
Repair Service 2-4 weeks $3012cartAdd to Cart

We Can Repair Your Panelview Plus 1000

We have a team of highly trained technicians that can repair your Panelview Plus quickly at a great low price. To get a repair quote call 1-800-730-0292 or email sales@dosupply.com. Some of the benefits of our repair process includes:

  • Repair Turnaround of 3-5 Days for Most Panelview Plus
  • Rush Repairs of 1-3 Days
  • Fast Return of Your Repair via UPS, FedEx, or DHL.
  • If the item is not repairable, you can choose to have it returned to you free of charge or it can be counted as an exchange credit toward a refurbished or surplus unit if available.
  • Wide range of repairs that can be completed by our highly skilled technicians as shown below.
  • All Repairs Come with Our 1-Year Warranty!

Repair Capabilities

We Can Repair Your Hardware Failures Including:

  • Communication Failures
  • Broken Toushcreens/Keypads
  • Broken Glass
  • Displays (Dead/Dim/Lines/Missing Pixels)
  • Dead Backlights
  • Broken Housing/Bezel
  • Power Board Failures

Start UP Error Codes and Messages:

  • RAM Test- Error 1
  • Internal CF- Error 23
  • CRC Check- Error 24
  • Watchdog Test- Error 30
  • Stuck Key- Error 31
  • Stuck Touch- Error 31.5
  • Battery Test- Error 32
  • NVRAM Access- Error 33.5
  • EXE Check- Error 40
  • External CF- Error 50
Type Lead Time Price Action
Repair Service 2-4 weeks $3012cartAdd to Cart

We Can Repair Your Panelview Plus 1000

We have a team of highly trained technicians that can repair your Panelview Plus quickly at a great low price. To get a repair quote call 1-800-730-0292 or email sales@dosupply.com. Some of the benefits of our repair process includes:

  • Repair Turnaround of 3-5 Days for Most Panelview Plus
  • Rush Repairs of 1-3 Days
  • Fast Return of Your Repair via UPS, FedEx, or DHL.
  • If the item is not repairable, you can choose to have it returned to you free of charge or it can be counted as an exchange credit toward a refurbished or surplus unit if available.
  • Wide range of repairs that can be completed by our highly skilled technicians as shown below.
  • All Repairs Come with Our 1-Year Warranty!

Repair Capabilities

We Can Repair Your Hardware Failures Including:

  • Communication Failures
  • Broken Toushcreens/Keypads
  • Broken Glass
  • Displays (Dead/Dim/Lines/Missing Pixels)
  • Dead Backlights
  • Broken Housing/Bezel
  • Power Board Failures

Start UP Error Codes and Messages:

  • RAM Test- Error 1
  • Internal CF- Error 23
  • CRC Check- Error 24
  • Watchdog Test- Error 30
  • Stuck Key- Error 31
  • Stuck Touch- Error 31.5
  • Battery Test- Error 32
  • NVRAM Access- Error 33.5
  • EXE Check- Error 40
  • External CF- Error 50
Revisions

Please refer to the manual for more information about the 2711P-B10C15A1 such as the wiring diagrams, data sheets and migration or obsolescence details.

Revision Part # Also Known as Availability
2711P-B10C15A1 Ser A
2711P-B10C15A1/A, Series A, Rev A Request Quote
2711P-B10C15A1X
2711P-B10C15A1/X, Series X, Rev X Request Quote

Common misspellings:
  • 27l1P-B10C15A1
  • 271lP-B10C15A1
  • 2711P-810C15A1
  • 2711P-Bl0C15A1
  • 2711P-B1oC15A1
  • 2711P-B10Cl5A1
  • 2711P-B10C15Al
  • 2711PB10C15A1
PDF
2711P-B10C15A1 PDF
Reviews

Reviews for 2711P-B10C15A1

Internal Review

"The 2711P-B15C4A1 is a PanelView Plus operator terminal. This operator terminal is a more modern version of operator terminals with a slim and compact body. This HMI has a large screen with size of 10.4 inches, ideal for application that require graphics and control system with medium complexity. Additionally, this HMI offers input options as it may be operated through the embedded keypad or via the touch screen interface. " -DO Supply Tech