About 2711P-T10C4A1

The Allen-Bradley 2711P-T10C4A1 is a PanelView Plus 1000 touch terminal. It comes with a 10.4-inch touchscreen that has a resolution of 640 x 480. Note that the 18-bit TFT color touchscreen is analog and resistive and has a total display area of 8.3 x 6.2 inches. Without an installed module, it measures 9.77 x 12.97 x 2.18 inches and weighs 5.7 pounds. Users can use bare fingers, gloved fingers, or a plastic stylus to operate the touchscreen. When using a stylus, make sure that the tip has a minimum radius of 1.3 millimeters to avoid damaging the screen. This terminal comes with a 64 MB flash memory and 64 MB RAM, as well as a status indicator that turns red when a fault is detected and green when everything is running normally.

The FactoryTalk View Machine Edition comes preloaded. The terminal also ships with a firmware that ranges from 3.13 to 4.48. PanelView Plus 1000 terminals come with various communication ports and the 2711P-T10C4A1, in particular, has EtherNet and RS-232 ports as well as two USB ports. Users can only use a 1761-NET-ENI communication cable for this terminal. Enclosures compatible with the 2711P-T10C4A1 terminal are the NEMA Type 12, 13, or 4X (but only when used indoors).

The typical AC power consumption of this terminal is 65 VA and its maximum AC power consumption of 160 VA. Its AC input voltage is 85 to 264 Volts AC or 47 to 63 Hertz. The terminal's nominal DC input voltage is 24 Volts DC and the input voltage ranges from 18 to 32 Volts DC. It has a typical DC power consumption of 39 W or 1.6 A at 24 Volts DC and a maximum DC power consumption of 70 W or 2.9 Amps at 24 Volts DC. Its storage temperature range is -20 to 70 degrees Celsius while its operating temperature range is 0 to 55 degrees Celsius. The operating shock of the terminal is 15 g at 11 milliseconds while non-operating shock is 30 g at 11 milliseconds. It also has a non-condensing relative humidity of 5-95%.

Technical specifications:

Type	Lead Time	Price	Action
Repair Service	2-4 weeks	$1230	Add to Cart

We Can Repair Your Panelview Plus 1000

We have a team of highly trained technicians that can repair your Panelview Plus quickly at a great low price. To get a repair quote call 1-800-730-0292 or email sales@dosupply.com. Some of the benefits of our repair process includes:

• Repair Turnaround of 3-5 Days for Most Panelview Plus
• Rush Repairs of 1-3 Days
• Fast Return of Your Repair via UPS, FedEx, or DHL.
• If the item is not repairable, you can choose to have it returned to you free of charge or it can be counted as an exchange credit toward a refurbished or new unit if available.
• Wide range of repairs that can be completed by our highly skilled technicians as shown below.
• All Repairs Come with Our 1-Year Warranty!

Repair Capabilities

We Can Repair Your Hardware Failures Including:

• Communication Failures
• Broken Toushcreens/Keypads
• Broken Glass
• Displays (Dead/Dim/Lines/Missing Pixels)
• Dead Backlights
• Broken Housing/Bezel
• Power Board Failures

Start UP Error Codes and Messages:

• RAM Test- Error 1
• Internal CF- Error 23
• CRC Check- Error 24
• Watchdog Test- Error 30
• Stuck Key- Error 31
• Stuck Touch- Error 31.5
• Battery Test- Error 32
• NVRAM Access- Error 33.5
• EXE Check- Error 40
• External CF- Error 50