2711P-T10C4A2 - In Stock | Allen Bradley Panelview Plus 1000

×

2711P-T10C4A2

Rated 4.4 with 16 reviews
About | Product Specifications | FAQ

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.


credit cards accepted
better business bureau

2711P-T10C4A2

Description: The Allen-Bradley/Rockwell Automation 2711P-T10C4A2 terminal is a touchscreen-powered operator interface terminal. It has been designed and manufactured as part of the Allen-Bradley Panelview Plus 1000 series. The 2711P-T10C4A2 operator interface terminal�s touchscreen is an analog resistive touchscreen which is designed to be durable enough for use in industrial environments and which is also able to provide accurate touch control. The screen is 10.4 inches wide with color graphics. The 2711P-T10C4A2 operator interface terminal operates at 85 to 264 Volts AC and 47 to 63 Hertz.
In Stock Ships Today
Request a quote for 2711P-T10C4A2

Description: The Allen-Bradley/Rockwell Automation 2711P-T10C4A2 terminal is a touchscreen-powered operator interface terminal. It has been designed and manufactured as part of the Allen-Bradley Panelview Plus 1000 series. The 2711P-T10C4A2 operator interface terminal�s touchscreen is an analog resistive touchscreen which is designed to be durable enough for use in industrial environments and which is also able to provide accurate touch control. The screen is 10.4 inches wide with color graphics. The 2711P-T10C4A2 operator interface terminal operates at 85 to 264 Volts AC and 47 to 63 Hertz.
About | Products Specs | FAQ

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

disclaimer
credit cards
better business bureau

Warranty: 1 year DO Supply Warranty Included
Shipping: Worldwide shipping via UPS, DHL, and TNT
Repairs: We offer repair service for the 2711P-T10C4A2.
Exchange: Exchange credit for your defective unit available.
Conditions: We sell preowned surplus and refurbished parts.

To speak to a sales representative for pricing & lead time:


Rated 4.4 with 16 reviews

    Technical Specifications for 2711P-T10C4A2

ManufacturerRockwell Automation
BrandAllen-Bradley
Input Voltage range:85-264VAC, 47-63 Hz
Integrated ports:Ethernet, RS-232, 1 USB host
Internal memory:25 MB Flash Memory
Input lifespan:1 million actuations
Resolution:640 x 480
Display Area:211 x 158 mm (8.3 x 6.2 in.)
Display Type:Color active-matrix TFT
Operator Input:Touch
Product Type:Operator Terminals
Product Family:PanelView Plus Compact Terminals
Part Number/Catalog No.2711P-T10C4A2
BacklightCCFL, 50,000 hours min at 25 ° C (77 °F), field replaceable
Display Size10.4 inches
Product LinePanelview Plus 1000
Display ColorColor
Input TypeTouchscreen
CommunicationEthernet and RS-232
Input Power85-264 VAC
Memory128 MB
Communication Cable1761-NET-ENI
Shipping Weight9 lbs.
Shipping Dimensions16 x 11 x 8 in
SeriesSer A, B, C, D, and F
UPC10612598338693
Product Lifecycle Status*Discontinued/Obsolete

*The Allen Bradley 2711P-T10C4A2 has been discontinued by the manufacturer, however we specialize in obsolete parts and can likely still supply surplus and/or refurbished replacement 2711P-T10C4A2 units instead of migration.

ManufacturerRockwell Automation
BrandAllen-Bradley
Input Voltage range:85-264VAC, 47-63 Hz
Integrated ports:Ethernet, RS-232, 1 USB host
Internal memory:25 MB Flash Memory
Input lifespan:1 million actuations
Resolution:640 x 480
Display Area:211 x 158 mm (8.3 x 6.2 in.)
Display Type:Color active-matrix TFT
Operator Input:Touch
Product Type:Operator Terminals
Product Family:PanelView Plus Compact Terminals
Part Number/Catalog No.2711P-T10C4A2
BacklightCCFL, 50,000 hours min at 25 ° C (77 °F), field replaceable
Display Size10.4 inches
Product LinePanelview Plus 1000
Display ColorColor
Input TypeTouchscreen
CommunicationEthernet and RS-232
Input Power85-264 VAC
Memory128 MB
Communication Cable1761-NET-ENI
Shipping Weight9 lbs.
Shipping Dimensions16 x 11 x 8 in
SeriesSer A, B, C, D, and F
UPC10612598338693
Product Lifecycle Status*Discontinued/Obsolete

*The Allen Bradley 2711P-T10C4A2 has been discontinued by the manufacturer, however we specialize in obsolete parts and can likely still supply surplus and/or refurbished replacement 2711P-T10C4A2 units instead of migration.

s

About 2711P-T10C4A2

The Allen-Bradley 2711P-T10C4A2 is a PanelView Plus 6 Model 1000 Terminal. The obsolete 2711P-T10C4A2 PanelView Plus 1000 is an operator terminal that allows the user to interface with their machine. This HMI has a 10.4 in. Color Display screen and powered using 85-264 Volt AC power. This 2711P-T10C4A2 PanelView Plus has the 128 MB logic module. The approximate shipping weight and dimensions are 9 lbs. and 16 x 11 x 8 in. This operator terminal supports EtherNet/IP (Ethernet Industrial Protocol) which is an open industrial network that supports real time I/O messaging, as well as message exchange. The Ethernet port connects to a controller residing on EtherNet/IP. This port can work with application transfers and printing as well.

The 2711P-T10C4A2 PanelView Plus is ideal for applications with a need to observe, manipulate, and display information graphically. This allows operators to quickly understand the status of their application. It combines the most beneficial features from the well-known Allen-Bradley PanelView Standard and PanelView HMI products, as well as adding new functionality. The new modular design makes the PanelView Plus a flexible, cost-effective terminal enabling OEMs, system integrators, and end users to choose, change, or upgrade components to satisfy differing application requirements.

The Allen-Bradley 2711P-T10C4A2 is a PanelView Plus operator terminal. This operator terminal features a 10-inch colored display screen, touchscreen input, and a variety of communication interfaces.

The 2711P-T10C4A2 operates when wired to an external AC source that provides a voltage range of 85-264 Volts AC, 47-63 Hertz. It has a power consumption of 160 Volt-amperes, maximum with typical consumption of 65 Volt-amperes. It also comes with a Peripheral Component Interconnect (PCI) slot for insertion of accessory modules.

The 2711P-T10C4A2 has one (1) Ethernet communication port, one (1) RS-232 port in the form of 9-pin sub-D connector that supports DH-485 and DF1 protocol. External input devices such as mouse and keyboard for operation flexibility may be attached to this operator terminal through the USB ports available to this device. Supported devices are USB mouse and USB keyboard as well as USB drive.

The process visualization screen available to the 2711P-T10C4A2 is a 10-inch, Color Active Matrix display with a resolution of 640 x 480 pixels and viewing area of 211 x 158 millimeters (8.3 x 6.2 inches). The screen has a luminance of 300 cd/m2 Nits and a CCFL backlight with 50,000 minimum operating lifespan.

To interact with the process or machine, the provided input interface is an analog resistive touchscreen that is designed to be operated at 1 million actuations and an operating force of 10-110 g. It is recommended to operate the 2711P-T10C4A2 using a stylus or a gloved finger. Additionally, protective screen overlay may be installed to protect the screen from industrial contaminants.

FAQ for 2711P-T10C4A2

What is the price of a 2711P-T10C4A2 PanelView Plus 6 Terminal?


Submit a quote request, send us an email, or call 800-730-0292 for our best price.

What is the 2711P-T10C4A2 screen's resolution?


The 2711P-T10C4A2 PanelView Plus 6 Terminal has a screen resolution of 640 x 480 pixels with 18-bit color graphics.

How many keys are on the keypad input for the 2711P-T10C4A2?


The 2711P-T10C4A2 PanelView Plus 6 Terminal has 32 function keys.

Does DO Supply offer repair services for the 2711P-T10C4A2 PanelView Plus 6 Terminal?


Yes, DO Supply offers repair services for a variety of Allen-Bradley products, such as the 2711P-T10C4A2. For more information or to request a repair quote, please click here.

What is the available memory of the 2711P-T10C4A2?


The 2711P-T10C4A2 has a logic module with 128 MB memory.

What are the embedded communication interfaces of the 2711P-T10C4A2?


The 2711P-T10C4A2 has One (1) Ethernet, One (1) RS232 and Two (2) USB ports.

What is the available input interface of the 2711P-T10C4A2?


The 2711P-T10C4A2 has a touch screen input interface.

Technical Description of 2711P-T10C4A2

The 2711P-T10C4A2 is a PanelView Plus 1000 Operator Terminal from Allen-Bradley. This operator terminal is powered by an external 85-264 Volts AC supply voltage and has a 10.4-inch colored display with embedded Ethernet, RS-232, and two (2) USB communication ports. This operator terminal has a touchscreen input interface.

Repair Services for 2711P-T10C4A2

Type Lead Time Price Action
Repair Service 2-4 weeks $2955cartAdd to Cart

We Can Repair Your Panelview Plus 1000

We have a team of highly trained technicians that can repair your Panelview Plus quickly at a great low price. To get a repair quote call 1-800-730-0292 or email sales@dosupply.com. Some of the benefits of our repair process includes:

  • Repair Turnaround of 3-5 Days for Most Panelview Plus
  • Rush Repairs of 1-3 Days
  • Fast Return of Your Repair via UPS, FedEx, or DHL.
  • If the item is not repairable, you can choose to have it returned to you free of charge or it can be counted as an exchange credit toward a refurbished or surplus unit if available.
  • Wide range of repairs that can be completed by our highly skilled technicians as shown below.
  • All Repairs Come with Our 1-Year Warranty!

Repair Capabilities

We Can Repair Your Hardware Failures Including:

  • Communication Failures
  • Broken Toushcreens/Keypads
  • Broken Glass
  • Displays (Dead/Dim/Lines/Missing Pixels)
  • Dead Backlights
  • Broken Housing/Bezel
  • Power Board Failures

Start UP Error Codes and Messages:

  • RAM Test- Error 1
  • Internal CF- Error 23
  • CRC Check- Error 24
  • Watchdog Test- Error 30
  • Stuck Key- Error 31
  • Stuck Touch- Error 31.5
  • Battery Test- Error 32
  • NVRAM Access- Error 33.5
  • EXE Check- Error 40
  • External CF- Error 50

Revisions for 2711P-T10C4A2

Please refer to the manual for more information about the 2711P-T10C4A2 such as the wiring diagrams, data sheets and migration or obsolescence details.

Revision Part # Also Known as Availability
2711P-T10C4A2 Ser A
2711P-T10C4A2/A, Series A, Rev A Request Quote
2711P-T10C4A2X
2711P-T10C4A2/X, Series X, Rev X Request Quote
Common misspellings:
  • 27l1P-T10C4A2
  • 271lP-T10C4A2
  • 2711P-Tl0C4A2
  • 2711P-T1oC4A2
  • 2711P-T10CAA2
  • 2711PT10C4A2

Reviews for 2711P-T10C4A2

Internal Review

"The 2711P-T10C4A2 is a PanelView Plus operator terminal. This operator terminal is an obsolete operator terminal however, loaded with advanced features during its active time. It has a 10-inch, colored display screen which is ideally used for medium to large applications. The main advantage of this operator terminal is that it comes with a touchscreen input interface which enables a much comfortable and easy operation as operators do not need to memorize the function of external buttons. " -DO Supply Tech

Dimensions For 2711P-T10C4A2

Size
Input Type
Panel Cutout Height in mm
Panel Cutout Width in mm
Terminal Height in mm
Terminal Width in mm
Terminal Overall Depth in mm
Terminal Mounted Depth in mm

Dimensions For 2711P-T10C4A2

Resolutions For 2711P-T10C4A2

Size 10.4 inch (1000 color)
Input Type Keypad or Keypad/ Touch
Display Type Color active-matrix TFT
Display Size (Diagonal) 10.4 in.
Viewing Area 211 x 158 mm (8.3 x 6.2 in.)
Display Resolution 640 x 480, 18-bit color graphics
Typical Brightness 300 cd/m2 (Nits)
About

Technical Specifications for 2711P-T10C4A2

ManufacturerRockwell Automation
BrandAllen-Bradley
Input Voltage range:85-264VAC, 47-63 Hz
Integrated ports:Ethernet, RS-232, 1 USB host
Internal memory:25 MB Flash Memory
Input lifespan:1 million actuations
Resolution:640 x 480
Display Area:211 x 158 mm (8.3 x 6.2 in.)
Display Type:Color active-matrix TFT
Operator Input:Touch
Product Type:Operator Terminals
Product Family:PanelView Plus Compact Terminals
Part Number/Catalog No.2711P-T10C4A2
BacklightCCFL, 50,000 hours min at 25 ° C (77 °F), field replaceable
Display Size10.4 inches
Product LinePanelview Plus 1000
Display ColorColor
Input TypeTouchscreen
CommunicationEthernet and RS-232
Input Power85-264 VAC
Memory128 MB
Communication Cable1761-NET-ENI
Shipping Weight9 lbs.
Shipping Dimensions16 x 11 x 8 in
SeriesSer A, B, C, D, and F
UPC10612598338693
Product Lifecycle Status*Discontinued/Obsolete
ManufacturerRockwell Automation
BrandAllen-Bradley
Input Voltage range:85-264VAC, 47-63 Hz
Integrated ports:Ethernet, RS-232, 1 USB host
Internal memory:25 MB Flash Memory
Input lifespan:1 million actuations
Resolution:640 x 480
Display Area:211 x 158 mm (8.3 x 6.2 in.)
Display Type:Color active-matrix TFT
Operator Input:Touch
Product Type:Operator Terminals
Product Family:PanelView Plus Compact Terminals
Part Number/Catalog No.2711P-T10C4A2
BacklightCCFL, 50,000 hours min at 25 ° C (77 °F), field replaceable
Display Size10.4 inches
Product LinePanelview Plus 1000
Display ColorColor
Input TypeTouchscreen
CommunicationEthernet and RS-232
Input Power85-264 VAC
Memory128 MB
Communication Cable1761-NET-ENI
Shipping Weight9 lbs.
Shipping Dimensions16 x 11 x 8 in
SeriesSer A, B, C, D, and F
UPC10612598338693
Product Lifecycle Status*Discontinued/Obsolete

*The Allen Bradley 2711P-T10C4A2 has been discontinued by the manufacturer, however we specialize in obsolete parts and can likely still supply surplus and/or refurbished replacement 2711P-T10C4A2 units instead of migration.

About 2711P-T10C4A2

The Allen-Bradley 2711P-T10C4A2 is a PanelView Plus 6 Model 1000 Terminal. The obsolete 2711P-T10C4A2 PanelView Plus 1000 is an operator terminal that allows the user to interface with their machine. This HMI has a 10.4 in. Color Display screen and powered using 85-264 Volt AC power. This 2711P-T10C4A2 PanelView Plus has the 128 MB logic module. The approximate shipping weight and dimensions are 9 lbs. and 16 x 11 x 8 in. This operator terminal supports EtherNet/IP (Ethernet Industrial Protocol) which is an open industrial network that supports real time I/O messaging, as well as message exchange. The Ethernet port connects to a controller residing on EtherNet/IP. This port can work with application transfers and printing as well.

The 2711P-T10C4A2 PanelView Plus is ideal for applications with a need to observe, manipulate, and display information graphically. This allows operators to quickly understand the status of their application. It combines the most beneficial features from the well-known Allen-Bradley PanelView Standard and PanelView HMI products, as well as adding new functionality. The new modular design makes the PanelView Plus a flexible, cost-effective terminal enabling OEMs, system integrators, and end users to choose, change, or upgrade components to satisfy differing application requirements.

The Allen-Bradley 2711P-T10C4A2 is a PanelView Plus operator terminal. This operator terminal features a 10-inch colored display screen, touchscreen input, and a variety of communication interfaces.

The 2711P-T10C4A2 operates when wired to an external AC source that provides a voltage range of 85-264 Volts AC, 47-63 Hertz. It has a power consumption of 160 Volt-amperes, maximum with typical consumption of 65 Volt-amperes. It also comes with a Peripheral Component Interconnect (PCI) slot for insertion of accessory modules.

The 2711P-T10C4A2 has one (1) Ethernet communication port, one (1) RS-232 port in the form of 9-pin sub-D connector that supports DH-485 and DF1 protocol. External input devices such as mouse and keyboard for operation flexibility may be attached to this operator terminal through the USB ports available to this device. Supported devices are USB mouse and USB keyboard as well as USB drive.

The process visualization screen available to the 2711P-T10C4A2 is a 10-inch, Color Active Matrix display with a resolution of 640 x 480 pixels and viewing area of 211 x 158 millimeters (8.3 x 6.2 inches). The screen has a luminance of 300 cd/m2 Nits and a CCFL backlight with 50,000 minimum operating lifespan.

To interact with the process or machine, the provided input interface is an analog resistive touchscreen that is designed to be operated at 1 million actuations and an operating force of 10-110 g. It is recommended to operate the 2711P-T10C4A2 using a stylus or a gloved finger. Additionally, protective screen overlay may be installed to protect the screen from industrial contaminants.

FAQ for 2711P-T10C4A2

What is the price of a 2711P-T10C4A2 PanelView Plus 6 Terminal?


Submit a quote request, send us an email, or call 800-730-0292 for our best price.

What is the 2711P-T10C4A2 screen's resolution?


The 2711P-T10C4A2 PanelView Plus 6 Terminal has a screen resolution of 640 x 480 pixels with 18-bit color graphics.

How many keys are on the keypad input for the 2711P-T10C4A2?


The 2711P-T10C4A2 PanelView Plus 6 Terminal has 32 function keys.

Does DO Supply offer repair services for the 2711P-T10C4A2 PanelView Plus 6 Terminal?


Yes, DO Supply offers repair services for a variety of Allen-Bradley products, such as the 2711P-T10C4A2. For more information or to request a repair quote, please click here.

What is the available memory of the 2711P-T10C4A2?


The 2711P-T10C4A2 has a logic module with 128 MB memory.

What are the embedded communication interfaces of the 2711P-T10C4A2?


The 2711P-T10C4A2 has One (1) Ethernet, One (1) RS232 and Two (2) USB ports.

What is the available input interface of the 2711P-T10C4A2?


The 2711P-T10C4A2 has a touch screen input interface.

Technical Description of 2711P-T10C4A2

The 2711P-T10C4A2 is a PanelView Plus 1000 Operator Terminal from Allen-Bradley. This operator terminal is powered by an external 85-264 Volts AC supply voltage and has a 10.4-inch colored display with embedded Ethernet, RS-232, and two (2) USB communication ports. This operator terminal has a touchscreen input interface.
Repairs
Type Lead Time Price Action
Repair Service 2-4 weeks $2955cartAdd to Cart

We Can Repair Your Panelview Plus 1000

We have a team of highly trained technicians that can repair your Panelview Plus quickly at a great low price. To get a repair quote call 1-800-730-0292 or email sales@dosupply.com. Some of the benefits of our repair process includes:

  • Repair Turnaround of 3-5 Days for Most Panelview Plus
  • Rush Repairs of 1-3 Days
  • Fast Return of Your Repair via UPS, FedEx, or DHL.
  • If the item is not repairable, you can choose to have it returned to you free of charge or it can be counted as an exchange credit toward a refurbished or surplus unit if available.
  • Wide range of repairs that can be completed by our highly skilled technicians as shown below.
  • All Repairs Come with Our 1-Year Warranty!

Repair Capabilities

We Can Repair Your Hardware Failures Including:

  • Communication Failures
  • Broken Toushcreens/Keypads
  • Broken Glass
  • Displays (Dead/Dim/Lines/Missing Pixels)
  • Dead Backlights
  • Broken Housing/Bezel
  • Power Board Failures

Start UP Error Codes and Messages:

  • RAM Test- Error 1
  • Internal CF- Error 23
  • CRC Check- Error 24
  • Watchdog Test- Error 30
  • Stuck Key- Error 31
  • Stuck Touch- Error 31.5
  • Battery Test- Error 32
  • NVRAM Access- Error 33.5
  • EXE Check- Error 40
  • External CF- Error 50
Type Lead Time Price Action
Repair Service 2-4 weeks $2955cartAdd to Cart

We Can Repair Your Panelview Plus 1000

We have a team of highly trained technicians that can repair your Panelview Plus quickly at a great low price. To get a repair quote call 1-800-730-0292 or email sales@dosupply.com. Some of the benefits of our repair process includes:

  • Repair Turnaround of 3-5 Days for Most Panelview Plus
  • Rush Repairs of 1-3 Days
  • Fast Return of Your Repair via UPS, FedEx, or DHL.
  • If the item is not repairable, you can choose to have it returned to you free of charge or it can be counted as an exchange credit toward a refurbished or surplus unit if available.
  • Wide range of repairs that can be completed by our highly skilled technicians as shown below.
  • All Repairs Come with Our 1-Year Warranty!

Repair Capabilities

We Can Repair Your Hardware Failures Including:

  • Communication Failures
  • Broken Toushcreens/Keypads
  • Broken Glass
  • Displays (Dead/Dim/Lines/Missing Pixels)
  • Dead Backlights
  • Broken Housing/Bezel
  • Power Board Failures

Start UP Error Codes and Messages:

  • RAM Test- Error 1
  • Internal CF- Error 23
  • CRC Check- Error 24
  • Watchdog Test- Error 30
  • Stuck Key- Error 31
  • Stuck Touch- Error 31.5
  • Battery Test- Error 32
  • NVRAM Access- Error 33.5
  • EXE Check- Error 40
  • External CF- Error 50
Revisions

Please refer to the manual for more information about the 2711P-T10C4A2 such as the wiring diagrams, data sheets and migration or obsolescence details.

Revision Part # Also Known as Availability
2711P-T10C4A2 Ser A
2711P-T10C4A2/A, Series A, Rev A Request Quote
2711P-T10C4A2X
2711P-T10C4A2/X, Series X, Rev X Request Quote

Common misspellings:
  • 27l1P-T10C4A2
  • 271lP-T10C4A2
  • 2711P-Tl0C4A2
  • 2711P-T1oC4A2
  • 2711P-T10CAA2
  • 2711PT10C4A2
PDF
2711P-T10C4A2 PDF
Resolutions

Resolutions For 2711P-T10C4A2

Size 10.4 inch (1000 color)
Input Type Keypad or Keypad/ Touch
Display Type Color active-matrix TFT
Display Size (Diagonal) 10.4 in.
Viewing Area 211 x 158 mm (8.3 x 6.2 in.)
Display Resolution 640 x 480, 18-bit color graphics
Typical Brightness 300 cd/m2 (Nits)
Reviews

Reviews for 2711P-T10C4A2

Internal Review

"The 2711P-T10C4A2 is a PanelView Plus operator terminal. This operator terminal is an obsolete operator terminal however, loaded with advanced features during its active time. It has a 10-inch, colored display screen which is ideally used for medium to large applications. The main advantage of this operator terminal is that it comes with a touchscreen input interface which enables a much comfortable and easy operation as operators do not need to memorize the function of external buttons. " -DO Supply Tech