2711P-T10C4B1 - In Stock | Allen Bradley Panelview Plus 1000

×

2711P-T10C4B1

Rated 3.5 with 16 reviews
About | Product Specifications | FAQ

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.


credit cards accepted
better business bureau

2711P-T10C4B1

Description: The Allen-Bradley 2711P-T10C4B1 is a Panelview Plus 1000 Operator Terminal. This operator terminal is powered by an external 18-32VDC supply voltage and has a 10.4-inch colored display with embedded RS232 and Ethernet communication ports. This operator terminal has a Touchscreen input interface.
In Stock Ships Today
Request a quote for 2711P-T10C4B1

Description: The Allen-Bradley 2711P-T10C4B1 is a Panelview Plus 1000 Operator Terminal. This operator terminal is powered by an external 18-32VDC supply voltage and has a 10.4-inch colored display with embedded RS232 and Ethernet communication ports. This operator terminal has a Touchscreen input interface.
About | Products Specs | FAQ

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

disclaimer
credit cards
better business bureau

Warranty: 1 year DO Supply Warranty Included
Shipping: Worldwide shipping via UPS, DHL, and TNT
Repairs: We offer repair service for the 2711P-T10C4B1.
Exchange: Exchange credit for your defective unit available.
Conditions: We sell preowned surplus and refurbished parts.

To speak to a sales representative for pricing & lead time:


Rated 3.5 with 16 reviews

    Technical Specifications for 2711P-T10C4B1

Resolution:640 x 480
Product Type:PanelView Plus 1000 Operator Terminals
Product Family:PanelView Plus Operator Terminals
Manufacturer:Rockwell Automation
Operator Input:Touch
BrandAllen-Bradley
Display Type:Color active matrix, thin-film transistor (TFT) with liquid crystal display (LCD)
Lifecycle status:Discontinued
Display Area:211 x 158 mm (8.3 x 6.2 in.)
BacklightCCFL 50,000 hours life, min.
Toiuchscreen:1 million presses
Actuation force:10-110 g
Internal memory:64MB Flash Memory / 64MB Random Access Memory
Integrated ports:Ethernet, Data Highway Plus (DH+), Remote I/O (RIO), DH485, RS232, USB communication ports.
Input Voltage range:18-32VDC
Display Size10.4 in
Part Number/Catalog No.2711P-T10C4B1
Product LinePanelview Plus 1000
Display ColorColor
Input TypeTouchscreen
CommunicationEthernet and RS-232
Input Power85-264 VAC and 18-32 VDC
Memory64 MB
Communication Cable1761-NET-ENI
Shipping Weight9 lbs.
Shipping Dimensions16 x 11 x 8 in
SeriesSer A, B, C, D, and F
Product Lifecycle Status*Discontinued/Obsolete

*The Allen Bradley 2711P-T10C4B1 has been discontinued by the manufacturer, however we specialize in obsolete parts and can likely still supply surplus and/or refurbished replacement 2711P-T10C4B1 units instead of migration.

Resolution:640 x 480
Product Type:PanelView Plus 1000 Operator Terminals
Product Family:PanelView Plus Operator Terminals
Manufacturer:Rockwell Automation
Operator Input:Touch
BrandAllen-Bradley
Display Type:Color active matrix, thin-film transistor (TFT) with liquid crystal display (LCD)
Lifecycle status:Discontinued
Display Area:211 x 158 mm (8.3 x 6.2 in.)
BacklightCCFL 50,000 hours life, min.
Toiuchscreen:1 million presses
Actuation force:10-110 g
Internal memory:64MB Flash Memory / 64MB Random Access Memory
Integrated ports:Ethernet, Data Highway Plus (DH+), Remote I/O (RIO), DH485, RS232, USB communication ports.
Input Voltage range:18-32VDC
Display Size10.4 in
Part Number/Catalog No.2711P-T10C4B1
Product LinePanelview Plus 1000
Display ColorColor
Input TypeTouchscreen
CommunicationEthernet and RS-232
Input Power85-264 VAC and 18-32 VDC
Memory64 MB
Communication Cable1761-NET-ENI
Shipping Weight9 lbs.
Shipping Dimensions16 x 11 x 8 in
SeriesSer A, B, C, D, and F
Product Lifecycle Status*Discontinued/Obsolete

*The Allen Bradley 2711P-T10C4B1 has been discontinued by the manufacturer, however we specialize in obsolete parts and can likely still supply surplus and/or refurbished replacement 2711P-T10C4B1 units instead of migration.

s

About 2711P-T10C4B1

The obsolete Allen Bradley Panelview Plus 1000 2711P-T10C4B1 is an operator terminal that allows the user to interface with their machine. This HMI has a 10.4 in. screen. It has One (1) Ethernet and RS-232 communication port.

The user is able to control the operator terminal using the Touchscreen to input information and data. This unit is powered using 18-32 VDC power. This Panelview Plus has the following internal memory: 64 MB. This unit has an internal backlight replacement part number of 2711P-RL10C2. The approximate shipping weight and dimensions are 9 lbs. and 16 x 11 x 8 in.

It has an Ethernet I/P interface which is an open industrial network that supports real time I/O messaging, as well as message exchange. The Ethernet port connects to a controller on an EtherNet/IP network by using both the network and standard Ethernet connections. This port can work with application transfers and printing as well. The EtherNet/IP screen displays and allows the user to modify some of the EtherNet/IP communication settings for a PanelView terminal. If another port is required, the 2711P-RN20 Ethernet communication module is available for the 700 to 1500 Panelview Plus terminals. Each module has a specific and unique IP address. This port has an RJ45, 10/100Base-T connector for network communication and enables MDI/MDI-X connections. The parameters can be downloaded with the application.

The runtime environment utilizes the 64 MB Random Access Memory (RAM) while HMI application files are stored to the 64 MB non-volatile memory.

The 2711P-T10C4B1’s Ethernet interface supports 10/100 Mbps communication speed with auto-negotiation capability. This ethernet port supports linear topology and capable of communicating with one or more partner devices. The RS232 interface is a 9-Pin Sub-D connector and supports DF1 protocol, ideal for point-to-point connection only. The Two (2) USB interface allows connection of external input devices such as keyboard and mouse as well as USB storage devices. This operator terminal is powered using 10-32VDC power supply voltage.

FAQ for 2711P-T10C4B1

What is the screen size of the 2711P-T10C4B1?


The 2711P-T10C4B1 has 10.4 ich display screen.

Does this operator terminal support vertical mounting?


No. only horizontal or landscape orientation is allowed as it does not support auto-rotation.

Can I connect multiple controllers to the 2711P-T10C4B1?


Yes. Use the Ethernet interface to connect multiple devices.

Technical Description of 2711P-T10C4B1

Panelview Plus 1000 Touchscreen 10.4 in Color Display Ethernet, RS-232, and two USB AC Power/DC Power Logic Module with 64MB

Repair Services for 2711P-T10C4B1

Type Lead Time Price Action
Repair Service 2-4 weeks $2897cartAdd to Cart

We Can Repair Your Panelview Plus 1000

We have a team of highly trained technicians that can repair your Panelview Plus quickly at a great low price. To get a repair quote call 1-800-730-0292 or email sales@dosupply.com. Some of the benefits of our repair process includes:

  • Repair Turnaround of 3-5 Days for Most Panelview Plus
  • Rush Repairs of 1-3 Days
  • Fast Return of Your Repair via UPS, FedEx, or DHL.
  • If the item is not repairable, you can choose to have it returned to you free of charge or it can be counted as an exchange credit toward a refurbished or surplus unit if available.
  • Wide range of repairs that can be completed by our highly skilled technicians as shown below.
  • All Repairs Come with Our 1-Year Warranty!

Repair Capabilities

We Can Repair Your Hardware Failures Including:

  • Communication Failures
  • Broken Toushcreens/Keypads
  • Broken Glass
  • Displays (Dead/Dim/Lines/Missing Pixels)
  • Dead Backlights
  • Broken Housing/Bezel
  • Power Board Failures

Start UP Error Codes and Messages:

  • RAM Test- Error 1
  • Internal CF- Error 23
  • CRC Check- Error 24
  • Watchdog Test- Error 30
  • Stuck Key- Error 31
  • Stuck Touch- Error 31.5
  • Battery Test- Error 32
  • NVRAM Access- Error 33.5
  • EXE Check- Error 40
  • External CF- Error 50

Revisions for 2711P-T10C4B1

Please refer to the manual for more information about the 2711P-T10C4B1 such as the wiring diagrams, data sheets and migration or obsolescence details.

Revision Part # Also Known as Availability
2711P-T10C4B1 Ser A
2711P-T10C4B1/A, Series A, Rev A Request Quote
2711P-T10C4B1 Ser B
2711P-T10C4B1/B, Series B, Rev B Request Quote
2711P-T10C4B1 Ser C
2711P-T10C4B1/C, Series C, Rev C Request Quote
2711P-T10C4B1X
2711P-T10C4B1/X, Series X, Rev X Request Quote
Common misspellings:
  • 27l1P-T10C4B1
  • 271lP-T10C4B1
  • 2711P-Tl0C4B1
  • 2711P-T1oC4B1
  • 2711P-T10CAB1
  • 2711P-T10C481
  • 2711P-T10C4Bl
  • 2711PT10C4B1

Reviews for 2711P-T10C4B1

Internal Review

"The 2711P-T10C4B1 PanelView Plus operator terminal is a Human Machine Interface (HMI) device with 10.4-inch colored graphic screen. This operator terminal has a compact and slim design, compared to the predecessor PanelView Standard Operator terminals which has bulky, CRT screens. With the slim design, this module requires smaller panels which contributes to cost-effectiveness. " -DO Supply Tech

Dimensions For 2711P-T10C4B1

Size
Input Type
Panel Cutout Height in mm
Panel Cutout Width in mm
Terminal Height in mm
Terminal Width in mm
Terminal Overall Depth in mm
Terminal Mounted Depth in mm

Dimensions For 2711P-T10C4B1

Resolutions For 2711P-T10C4B1

About

Technical Specifications for 2711P-T10C4B1

Resolution:640 x 480
Product Type:PanelView Plus 1000 Operator Terminals
Product Family:PanelView Plus Operator Terminals
Manufacturer:Rockwell Automation
Operator Input:Touch
BrandAllen-Bradley
Display Type:Color active matrix, thin-film transistor (TFT) with liquid crystal display (LCD)
Lifecycle status:Discontinued
Display Area:211 x 158 mm (8.3 x 6.2 in.)
BacklightCCFL 50,000 hours life, min.
Toiuchscreen:1 million presses
Actuation force:10-110 g
Internal memory:64MB Flash Memory / 64MB Random Access Memory
Integrated ports:Ethernet, Data Highway Plus (DH+), Remote I/O (RIO), DH485, RS232, USB communication ports.
Input Voltage range:18-32VDC
Display Size10.4 in
Part Number/Catalog No.2711P-T10C4B1
Product LinePanelview Plus 1000
Display ColorColor
Input TypeTouchscreen
CommunicationEthernet and RS-232
Input Power85-264 VAC and 18-32 VDC
Memory64 MB
Communication Cable1761-NET-ENI
Shipping Weight9 lbs.
Shipping Dimensions16 x 11 x 8 in
SeriesSer A, B, C, D, and F
Product Lifecycle Status*Discontinued/Obsolete
Resolution:640 x 480
Product Type:PanelView Plus 1000 Operator Terminals
Product Family:PanelView Plus Operator Terminals
Manufacturer:Rockwell Automation
Operator Input:Touch
BrandAllen-Bradley
Display Type:Color active matrix, thin-film transistor (TFT) with liquid crystal display (LCD)
Lifecycle status:Discontinued
Display Area:211 x 158 mm (8.3 x 6.2 in.)
BacklightCCFL 50,000 hours life, min.
Toiuchscreen:1 million presses
Actuation force:10-110 g
Internal memory:64MB Flash Memory / 64MB Random Access Memory
Integrated ports:Ethernet, Data Highway Plus (DH+), Remote I/O (RIO), DH485, RS232, USB communication ports.
Input Voltage range:18-32VDC
Display Size10.4 in
Part Number/Catalog No.2711P-T10C4B1
Product LinePanelview Plus 1000
Display ColorColor
Input TypeTouchscreen
CommunicationEthernet and RS-232
Input Power85-264 VAC and 18-32 VDC
Memory64 MB
Communication Cable1761-NET-ENI
Shipping Weight9 lbs.
Shipping Dimensions16 x 11 x 8 in
SeriesSer A, B, C, D, and F
Product Lifecycle Status*Discontinued/Obsolete

*The Allen Bradley 2711P-T10C4B1 has been discontinued by the manufacturer, however we specialize in obsolete parts and can likely still supply surplus and/or refurbished replacement 2711P-T10C4B1 units instead of migration.

About 2711P-T10C4B1

The obsolete Allen Bradley Panelview Plus 1000 2711P-T10C4B1 is an operator terminal that allows the user to interface with their machine. This HMI has a 10.4 in. screen. It has One (1) Ethernet and RS-232 communication port.

The user is able to control the operator terminal using the Touchscreen to input information and data. This unit is powered using 18-32 VDC power. This Panelview Plus has the following internal memory: 64 MB. This unit has an internal backlight replacement part number of 2711P-RL10C2. The approximate shipping weight and dimensions are 9 lbs. and 16 x 11 x 8 in.

It has an Ethernet I/P interface which is an open industrial network that supports real time I/O messaging, as well as message exchange. The Ethernet port connects to a controller on an EtherNet/IP network by using both the network and standard Ethernet connections. This port can work with application transfers and printing as well. The EtherNet/IP screen displays and allows the user to modify some of the EtherNet/IP communication settings for a PanelView terminal. If another port is required, the 2711P-RN20 Ethernet communication module is available for the 700 to 1500 Panelview Plus terminals. Each module has a specific and unique IP address. This port has an RJ45, 10/100Base-T connector for network communication and enables MDI/MDI-X connections. The parameters can be downloaded with the application.

The runtime environment utilizes the 64 MB Random Access Memory (RAM) while HMI application files are stored to the 64 MB non-volatile memory.

The 2711P-T10C4B1’s Ethernet interface supports 10/100 Mbps communication speed with auto-negotiation capability. This ethernet port supports linear topology and capable of communicating with one or more partner devices. The RS232 interface is a 9-Pin Sub-D connector and supports DF1 protocol, ideal for point-to-point connection only. The Two (2) USB interface allows connection of external input devices such as keyboard and mouse as well as USB storage devices. This operator terminal is powered using 10-32VDC power supply voltage.

FAQ for 2711P-T10C4B1

What is the screen size of the 2711P-T10C4B1?


The 2711P-T10C4B1 has 10.4 ich display screen.

Does this operator terminal support vertical mounting?


No. only horizontal or landscape orientation is allowed as it does not support auto-rotation.

Can I connect multiple controllers to the 2711P-T10C4B1?


Yes. Use the Ethernet interface to connect multiple devices.

Technical Description of 2711P-T10C4B1

Panelview Plus 1000 Touchscreen 10.4 in Color Display Ethernet, RS-232, and two USB AC Power/DC Power Logic Module with 64MB
Repairs
Type Lead Time Price Action
Repair Service 2-4 weeks $2897cartAdd to Cart

We Can Repair Your Panelview Plus 1000

We have a team of highly trained technicians that can repair your Panelview Plus quickly at a great low price. To get a repair quote call 1-800-730-0292 or email sales@dosupply.com. Some of the benefits of our repair process includes:

  • Repair Turnaround of 3-5 Days for Most Panelview Plus
  • Rush Repairs of 1-3 Days
  • Fast Return of Your Repair via UPS, FedEx, or DHL.
  • If the item is not repairable, you can choose to have it returned to you free of charge or it can be counted as an exchange credit toward a refurbished or surplus unit if available.
  • Wide range of repairs that can be completed by our highly skilled technicians as shown below.
  • All Repairs Come with Our 1-Year Warranty!

Repair Capabilities

We Can Repair Your Hardware Failures Including:

  • Communication Failures
  • Broken Toushcreens/Keypads
  • Broken Glass
  • Displays (Dead/Dim/Lines/Missing Pixels)
  • Dead Backlights
  • Broken Housing/Bezel
  • Power Board Failures

Start UP Error Codes and Messages:

  • RAM Test- Error 1
  • Internal CF- Error 23
  • CRC Check- Error 24
  • Watchdog Test- Error 30
  • Stuck Key- Error 31
  • Stuck Touch- Error 31.5
  • Battery Test- Error 32
  • NVRAM Access- Error 33.5
  • EXE Check- Error 40
  • External CF- Error 50
Type Lead Time Price Action
Repair Service 2-4 weeks $2897cartAdd to Cart

We Can Repair Your Panelview Plus 1000

We have a team of highly trained technicians that can repair your Panelview Plus quickly at a great low price. To get a repair quote call 1-800-730-0292 or email sales@dosupply.com. Some of the benefits of our repair process includes:

  • Repair Turnaround of 3-5 Days for Most Panelview Plus
  • Rush Repairs of 1-3 Days
  • Fast Return of Your Repair via UPS, FedEx, or DHL.
  • If the item is not repairable, you can choose to have it returned to you free of charge or it can be counted as an exchange credit toward a refurbished or surplus unit if available.
  • Wide range of repairs that can be completed by our highly skilled technicians as shown below.
  • All Repairs Come with Our 1-Year Warranty!

Repair Capabilities

We Can Repair Your Hardware Failures Including:

  • Communication Failures
  • Broken Toushcreens/Keypads
  • Broken Glass
  • Displays (Dead/Dim/Lines/Missing Pixels)
  • Dead Backlights
  • Broken Housing/Bezel
  • Power Board Failures

Start UP Error Codes and Messages:

  • RAM Test- Error 1
  • Internal CF- Error 23
  • CRC Check- Error 24
  • Watchdog Test- Error 30
  • Stuck Key- Error 31
  • Stuck Touch- Error 31.5
  • Battery Test- Error 32
  • NVRAM Access- Error 33.5
  • EXE Check- Error 40
  • External CF- Error 50
Revisions

Please refer to the manual for more information about the 2711P-T10C4B1 such as the wiring diagrams, data sheets and migration or obsolescence details.

Revision Part # Also Known as Availability
2711P-T10C4B1 Ser A
2711P-T10C4B1/A, Series A, Rev A Request Quote
2711P-T10C4B1 Ser B
2711P-T10C4B1/B, Series B, Rev B Request Quote
2711P-T10C4B1 Ser C
2711P-T10C4B1/C, Series C, Rev C Request Quote
2711P-T10C4B1X
2711P-T10C4B1/X, Series X, Rev X Request Quote

Common misspellings:
  • 27l1P-T10C4B1
  • 271lP-T10C4B1
  • 2711P-Tl0C4B1
  • 2711P-T1oC4B1
  • 2711P-T10CAB1
  • 2711P-T10C481
  • 2711P-T10C4Bl
  • 2711PT10C4B1
PDF
2711P-T10C4B1 PDF
Reviews

Reviews for 2711P-T10C4B1

Internal Review

"The 2711P-T10C4B1 PanelView Plus operator terminal is a Human Machine Interface (HMI) device with 10.4-inch colored graphic screen. This operator terminal has a compact and slim design, compared to the predecessor PanelView Standard Operator terminals which has bulky, CRT screens. With the slim design, this module requires smaller panels which contributes to cost-effectiveness. " -DO Supply Tech