2711P-T10C4D2 - In Stock | Allen Bradley Panelview Plus 1000

2711P-T10C4D2

Rated 4.9 with 11 reviews

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.


credit cards accepted
better business bureau

2711P-T10C4D2

Description: The Allen-Bradley 2711P-T10C4D2 is an Allen-Bradley PanelView Plus 1000 Operator Terminal. This operator terminal is powered by an external 18-32VDC supply voltage and has a 10.4-inch colored display with embedded RS232 and Ethernet communication ports. This operator terminal has a Touchscreen input interface.
In Stock Ships Today
Request a quote for 2711P-T10C4D2

Description: The Allen-Bradley 2711P-T10C4D2 is an Allen-Bradley PanelView Plus 1000 Operator Terminal. This operator terminal is powered by an external 18-32VDC supply voltage and has a 10.4-inch colored display with embedded RS232 and Ethernet communication ports. This operator terminal has a Touchscreen input interface.

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

disclaimer
credit cards
better business bureau

Warranty: 1 year DO Supply Warranty Included
Shipping: Worldwide shipping via UPS, DHL, and TNT
Repairs: We offer repair service for the 2711P-T10C4D2.
Exchange: Exchange credit for your defective unit available.
Conditions: We sell preowned surplus and refurbished parts.

To speak to a sales representative for pricing & lead time:


Rated 4.9 with 11 reviews

    Technical Specifications for 2711P-T10C4D2

ManufacturerRockwell Automation
Input Voltage range:18-32VDC
Integrated ports:Ethernet, Data Highway Plus (DH+), Remote I/O (RIO), DH485, RS232, USB communication ports.
Internal memory:128MB Flash Memory / 128MB Random Access Memory
Actuation force:10-110 g
Toiuchscreen:1 million presses
Resolution:640 x 480
Display Area:211 x 158 mm (8.3 x 6.2 in.)
Lifecycle status:Discontinued
Display Type:Color active matrix, thin-film transistor (TFT) with liquid crystal display (LCD)
Operator Input:Touch
Product Type:PanelView Plus 1000 Operator Terminals
Product Family:PanelView Plus Operator Terminals
BrandAllen-Bradley
Part Number/Catalog No.2711P-T10C4D2
Display Size10.4 in
BacklightCCFL 50,000 hours life, min.
Product LinePanelview Plus 1000
Display ColorColor
Input TypeTouchscreen
CommunicationEthernet and RS-232
Input Power18 to 32 Volts DC
Memory128 MB
Communication Cable1761-NET-ENI
Shipping Weight9 pounds
Shipping Dimensions16 x 11 x 8 inches
SeriesSer A, B, C, D, and F
UPC10662073072086
Product Lifecycle Status*Discontinued/Obsolete

*The Allen Bradley 2711P-T10C4D2 has been discontinued by the manufacturer, however we specialize in obsolete parts and can likely still supply surplus and/or refurbished replacement 2711P-T10C4D2 units instead of migration.

ManufacturerRockwell Automation
Input Voltage range:18-32VDC
Integrated ports:Ethernet, Data Highway Plus (DH+), Remote I/O (RIO), DH485, RS232, USB communication ports.
Internal memory:128MB Flash Memory / 128MB Random Access Memory
Actuation force:10-110 g
Toiuchscreen:1 million presses
Resolution:640 x 480
Display Area:211 x 158 mm (8.3 x 6.2 in.)
Lifecycle status:Discontinued
Display Type:Color active matrix, thin-film transistor (TFT) with liquid crystal display (LCD)
Operator Input:Touch
Product Type:PanelView Plus 1000 Operator Terminals
Product Family:PanelView Plus Operator Terminals
BrandAllen-Bradley
Part Number/Catalog No.2711P-T10C4D2
Display Size10.4 in
BacklightCCFL 50,000 hours life, min.
Product LinePanelview Plus 1000
Display ColorColor
Input TypeTouchscreen
CommunicationEthernet and RS-232
Input Power18 to 32 Volts DC
Memory128 MB
Communication Cable1761-NET-ENI
Shipping Weight9 pounds
Shipping Dimensions16 x 11 x 8 inches
SeriesSer A, B, C, D, and F
UPC10662073072086
Product Lifecycle Status*Discontinued/Obsolete

*The Allen Bradley 2711P-T10C4D2 has been discontinued by the manufacturer, however we specialize in obsolete parts and can likely still supply surplus and/or refurbished replacement 2711P-T10C4D2 units instead of migration.

s

About 2711P-T10C4D2

The Allen-Bradley 2711P-T10C4D2 belong to the PanelView Plus 1000 product category of graphic operator terminals. This operator terminal is capable of being downloaded with custom process mimic design, for the purpose of representing the necessary monitoring and control points of the system.

This operator terminal may be used to communicate with the Allen-Bradley Programmable Logic Controllers (PLC) such as PLC5, SLC500 and MicroLogix controllers. It is also capable of interfacing with the latest Logix Programmable Automation Controller (PAC) platforms such as CompactLogix and ControlLogix controllers. Communication may be established through any of the available communication interfaces such as Ethernet and RS232 as well as USB ports.

The Ethernet interface is used for modern communication devices and supports multi-partner communication. It uses a LAN cable crimped with an RJ45 connector and supports 10/100 mbps communication speed with auto-negotiation function. It supports 100 meters of communication and may be extended further with the use of a repeater and media converter. The RS232 interface supports DF1 protocol which is used for peer-to-peer communication over short distances. The USB ports are used for connecting external peripherals such as mouse, keyboard, printer and other devices.

The 2711P-T10C4D1 has a 10.4 inch colored display screen and permits operator interaction through the analog resistive touchscreen interface, designed up to 1 million actuations with an actuation force of 10-110 g. The embedded memory amounts to 128 MB Random Access Memory (RAM) and 128 MB Flash Memory. This operator terminal is powered by an external 24VDC power supply voltage.

The nominal DC input voltage of the 2711P-T10C4D2 terminal is 24 Volts DC and its input voltage ranges from 18 to 32 Volts DC. It also has a maximum DC power consumption of 70 Watts, with 2.9 Amps of current at 24 Volts DC, and a typical DC power consumption of 39 Watts, with 1.6 Amps of current also at 24 Volts DC. This terminal has an AC input voltage ranges of 85 to 264 Volts AC at 47 to 63 Hertz. Its maximum AC power consumption is 160 VA, while its typical AC power consumption is 65 VA. The 2711P-T10C4D2 terminal also has an operating temperature range of 32 to 131 degrees Fahrenheit, a storage temperature range of -4 to 158 degrees Fahrenheit, and a non-condensing relative humidity of 5 to 95%. Its operating shock is 15 G at 11 milliseconds and its non-operating shock is 30 G at 11 milliseconds. Communication ports for this terminal are an RS-232 port and an EtherNet port.

FAQ for 2711P-T10C4D2

Is the internal backlight replaceable?


Yes, 2711P-T10C4D2 has a replaceable internal backlight. The replacement part number is 2711P-RL10C2.

What is the input type for 2711P-T10C4D2?


The user is able to control the 2711P-T10C4D2 terminal using the Touchscreen to input information and data.

What is the price of 2711P-T10C4D2?


Submit a quote request, send us an email or call 800-730-0292 for our best price.

What is the difference between the 2711P-T10C4D1 and 2711P-T10C4D2?


The 2711P-T10C4D1 has 64 MB Flash and RAM memory while the 2711P-T10C4D2 has 128 MB flash and RAM memory.

Does the embedded ethernet interface support Device Level Ring (DLR) topology?


No. Since this is a single port, only linear communication is supported. DLR topology may still be implemented with the use of external ethernet switches such as ETAP.

What is the power supply requirement of the 2711P-T10C4D2?


The 2711P-T10C4D2 is powered by an external supply voltage of 18-32VDC.

Technical Description of 2711P-T10C4D2

Panelview Plus 1000 Touchscreen 10.4 in Color Display Ethernet, RS-232, and two USB DC Power Logic Module with 128MB

Repair Services for 2711P-T10C4D2

Type Lead Time Price Action
Repair Service 2-4 weeks $1901cartAdd to Cart

We Can Repair Your Panelview Plus 1000

We have a team of highly trained technicians that can repair your Panelview Plus quickly at a great low price. To get a repair quote call 1-800-730-0292 or email sales@dosupply.com. Some of the benefits of our repair process includes:

  • Repair Turnaround of 3-5 Days for Most Panelview Plus
  • Rush Repairs of 1-3 Days
  • Fast Return of Your Repair via UPS, FedEx, or DHL.
  • If the item is not repairable, you can choose to have it returned to you free of charge or it can be counted as an exchange credit toward a refurbished or surplus unit if available.
  • Wide range of repairs that can be completed by our highly skilled technicians as shown below.
  • All Repairs Come with Our 1-Year Warranty!

Repair Capabilities

We Can Repair Your Hardware Failures Including:

  • Communication Failures
  • Broken Toushcreens/Keypads
  • Broken Glass
  • Displays (Dead/Dim/Lines/Missing Pixels)
  • Dead Backlights
  • Broken Housing/Bezel
  • Power Board Failures

Start UP Error Codes and Messages:

  • RAM Test- Error 1
  • Internal CF- Error 23
  • CRC Check- Error 24
  • Watchdog Test- Error 30
  • Stuck Key- Error 31
  • Stuck Touch- Error 31.5
  • Battery Test- Error 32
  • NVRAM Access- Error 33.5
  • EXE Check- Error 40
  • External CF- Error 50

Revisions for 2711P-T10C4D2

Please refer to the manual for more information about the 2711P-T10C4D2 such as the wiring diagrams, data sheets and migration or obsolescence details.

Revision Part # Also Known as Availability
2711P-T10C4D2/A, Series A, Rev A Request Quote
2711P-T10C4D2X
2711P-T10C4D2/X, Series X, Rev X Request Quote
Common misspellings:
  • 27l1P-T10C4D2
  • 271lP-T10C4D2
  • 2711P-Tl0C4D2
  • 2711P-T1oC4D2
  • 2711P-T10CAD2
  • 2711PT10C4D2

Reviews for 2711P-T10C4D2

Internal Review

"The 2711P-T10C4D2 is a PanelView Plus 1000 operator terminal. This operator terminal features an upgraded internal RAM and Flash memory, having 128 MB RAM and 128 MB Flash compared to the 2711P-T10C4D1 which has 64 MB Flash and 64 MB RAM. With these upgraded memories, user can expect the terminal to operate even with a high-density graphics design. " -DO Supply Tech

Dimensions For 2711P-T10C4D2

Size
Input Type
Panel Cutout Height in mm
Panel Cutout Width in mm
Terminal Height in mm
Terminal Width in mm
Terminal Overall Depth in mm
Terminal Mounted Depth in mm

Dimensions For 2711P-T10C4D2

Resolutions For 2711P-T10C4D2

Size 10.4 inch (1000 color)
Input Type Keypad or Keypad/ Touch
Display Type Color active-matrix TFT
Display Size (Diagonal) 10.4 in.
Viewing Area 211 x 158 mm (8.3 x 6.2 in.)
Display Resolution 640 x 480, 18-bit color graphics
Typical Brightness 300 cd/m2 (Nits)
About

Technical Specifications for 2711P-T10C4D2

ManufacturerRockwell Automation
Input Voltage range:18-32VDC
Integrated ports:Ethernet, Data Highway Plus (DH+), Remote I/O (RIO), DH485, RS232, USB communication ports.
Internal memory:128MB Flash Memory / 128MB Random Access Memory
Actuation force:10-110 g
Toiuchscreen:1 million presses
Resolution:640 x 480
Display Area:211 x 158 mm (8.3 x 6.2 in.)
Lifecycle status:Discontinued
Display Type:Color active matrix, thin-film transistor (TFT) with liquid crystal display (LCD)
Operator Input:Touch
Product Type:PanelView Plus 1000 Operator Terminals
Product Family:PanelView Plus Operator Terminals
BrandAllen-Bradley
Part Number/Catalog No.2711P-T10C4D2
Display Size10.4 in
BacklightCCFL 50,000 hours life, min.
Product LinePanelview Plus 1000
Display ColorColor
Input TypeTouchscreen
CommunicationEthernet and RS-232
Input Power18 to 32 Volts DC
Memory128 MB
Communication Cable1761-NET-ENI
Shipping Weight9 pounds
Shipping Dimensions16 x 11 x 8 inches
SeriesSer A, B, C, D, and F
UPC10662073072086
Product Lifecycle Status*Discontinued/Obsolete
ManufacturerRockwell Automation
Input Voltage range:18-32VDC
Integrated ports:Ethernet, Data Highway Plus (DH+), Remote I/O (RIO), DH485, RS232, USB communication ports.
Internal memory:128MB Flash Memory / 128MB Random Access Memory
Actuation force:10-110 g
Toiuchscreen:1 million presses
Resolution:640 x 480
Display Area:211 x 158 mm (8.3 x 6.2 in.)
Lifecycle status:Discontinued
Display Type:Color active matrix, thin-film transistor (TFT) with liquid crystal display (LCD)
Operator Input:Touch
Product Type:PanelView Plus 1000 Operator Terminals
Product Family:PanelView Plus Operator Terminals
BrandAllen-Bradley
Part Number/Catalog No.2711P-T10C4D2
Display Size10.4 in
BacklightCCFL 50,000 hours life, min.
Product LinePanelview Plus 1000
Display ColorColor
Input TypeTouchscreen
CommunicationEthernet and RS-232
Input Power18 to 32 Volts DC
Memory128 MB
Communication Cable1761-NET-ENI
Shipping Weight9 pounds
Shipping Dimensions16 x 11 x 8 inches
SeriesSer A, B, C, D, and F
UPC10662073072086
Product Lifecycle Status*Discontinued/Obsolete

*The Allen Bradley 2711P-T10C4D2 has been discontinued by the manufacturer, however we specialize in obsolete parts and can likely still supply surplus and/or refurbished replacement 2711P-T10C4D2 units instead of migration.

About 2711P-T10C4D2

The Allen-Bradley 2711P-T10C4D2 belong to the PanelView Plus 1000 product category of graphic operator terminals. This operator terminal is capable of being downloaded with custom process mimic design, for the purpose of representing the necessary monitoring and control points of the system.

This operator terminal may be used to communicate with the Allen-Bradley Programmable Logic Controllers (PLC) such as PLC5, SLC500 and MicroLogix controllers. It is also capable of interfacing with the latest Logix Programmable Automation Controller (PAC) platforms such as CompactLogix and ControlLogix controllers. Communication may be established through any of the available communication interfaces such as Ethernet and RS232 as well as USB ports.

The Ethernet interface is used for modern communication devices and supports multi-partner communication. It uses a LAN cable crimped with an RJ45 connector and supports 10/100 mbps communication speed with auto-negotiation function. It supports 100 meters of communication and may be extended further with the use of a repeater and media converter. The RS232 interface supports DF1 protocol which is used for peer-to-peer communication over short distances. The USB ports are used for connecting external peripherals such as mouse, keyboard, printer and other devices.

The 2711P-T10C4D1 has a 10.4 inch colored display screen and permits operator interaction through the analog resistive touchscreen interface, designed up to 1 million actuations with an actuation force of 10-110 g. The embedded memory amounts to 128 MB Random Access Memory (RAM) and 128 MB Flash Memory. This operator terminal is powered by an external 24VDC power supply voltage.

The nominal DC input voltage of the 2711P-T10C4D2 terminal is 24 Volts DC and its input voltage ranges from 18 to 32 Volts DC. It also has a maximum DC power consumption of 70 Watts, with 2.9 Amps of current at 24 Volts DC, and a typical DC power consumption of 39 Watts, with 1.6 Amps of current also at 24 Volts DC. This terminal has an AC input voltage ranges of 85 to 264 Volts AC at 47 to 63 Hertz. Its maximum AC power consumption is 160 VA, while its typical AC power consumption is 65 VA. The 2711P-T10C4D2 terminal also has an operating temperature range of 32 to 131 degrees Fahrenheit, a storage temperature range of -4 to 158 degrees Fahrenheit, and a non-condensing relative humidity of 5 to 95%. Its operating shock is 15 G at 11 milliseconds and its non-operating shock is 30 G at 11 milliseconds. Communication ports for this terminal are an RS-232 port and an EtherNet port.

FAQ for 2711P-T10C4D2

Is the internal backlight replaceable?


Yes, 2711P-T10C4D2 has a replaceable internal backlight. The replacement part number is 2711P-RL10C2.

What is the input type for 2711P-T10C4D2?


The user is able to control the 2711P-T10C4D2 terminal using the Touchscreen to input information and data.

What is the price of 2711P-T10C4D2?


Submit a quote request, send us an email or call 800-730-0292 for our best price.

What is the difference between the 2711P-T10C4D1 and 2711P-T10C4D2?


The 2711P-T10C4D1 has 64 MB Flash and RAM memory while the 2711P-T10C4D2 has 128 MB flash and RAM memory.

Does the embedded ethernet interface support Device Level Ring (DLR) topology?


No. Since this is a single port, only linear communication is supported. DLR topology may still be implemented with the use of external ethernet switches such as ETAP.

What is the power supply requirement of the 2711P-T10C4D2?


The 2711P-T10C4D2 is powered by an external supply voltage of 18-32VDC.

Technical Description of 2711P-T10C4D2

Panelview Plus 1000 Touchscreen 10.4 in Color Display Ethernet, RS-232, and two USB DC Power Logic Module with 128MB

Repairs
Type Lead Time Price Action
Repair Service 2-4 weeks $1901cartAdd to Cart

We Can Repair Your Panelview Plus 1000

We have a team of highly trained technicians that can repair your Panelview Plus quickly at a great low price. To get a repair quote call 1-800-730-0292 or email sales@dosupply.com. Some of the benefits of our repair process includes:

  • Repair Turnaround of 3-5 Days for Most Panelview Plus
  • Rush Repairs of 1-3 Days
  • Fast Return of Your Repair via UPS, FedEx, or DHL.
  • If the item is not repairable, you can choose to have it returned to you free of charge or it can be counted as an exchange credit toward a refurbished or surplus unit if available.
  • Wide range of repairs that can be completed by our highly skilled technicians as shown below.
  • All Repairs Come with Our 1-Year Warranty!

Repair Capabilities

We Can Repair Your Hardware Failures Including:

  • Communication Failures
  • Broken Toushcreens/Keypads
  • Broken Glass
  • Displays (Dead/Dim/Lines/Missing Pixels)
  • Dead Backlights
  • Broken Housing/Bezel
  • Power Board Failures

Start UP Error Codes and Messages:

  • RAM Test- Error 1
  • Internal CF- Error 23
  • CRC Check- Error 24
  • Watchdog Test- Error 30
  • Stuck Key- Error 31
  • Stuck Touch- Error 31.5
  • Battery Test- Error 32
  • NVRAM Access- Error 33.5
  • EXE Check- Error 40
  • External CF- Error 50
Type Lead Time Price Action
Repair Service 2-4 weeks $1901cartAdd to Cart

We Can Repair Your Panelview Plus 1000

We have a team of highly trained technicians that can repair your Panelview Plus quickly at a great low price. To get a repair quote call 1-800-730-0292 or email sales@dosupply.com. Some of the benefits of our repair process includes:

  • Repair Turnaround of 3-5 Days for Most Panelview Plus
  • Rush Repairs of 1-3 Days
  • Fast Return of Your Repair via UPS, FedEx, or DHL.
  • If the item is not repairable, you can choose to have it returned to you free of charge or it can be counted as an exchange credit toward a refurbished or surplus unit if available.
  • Wide range of repairs that can be completed by our highly skilled technicians as shown below.
  • All Repairs Come with Our 1-Year Warranty!

Repair Capabilities

We Can Repair Your Hardware Failures Including:

  • Communication Failures
  • Broken Toushcreens/Keypads
  • Broken Glass
  • Displays (Dead/Dim/Lines/Missing Pixels)
  • Dead Backlights
  • Broken Housing/Bezel
  • Power Board Failures

Start UP Error Codes and Messages:

  • RAM Test- Error 1
  • Internal CF- Error 23
  • CRC Check- Error 24
  • Watchdog Test- Error 30
  • Stuck Key- Error 31
  • Stuck Touch- Error 31.5
  • Battery Test- Error 32
  • NVRAM Access- Error 33.5
  • EXE Check- Error 40
  • External CF- Error 50
Revisions

Please refer to the manual for more information about the 2711P-T10C4D2 such as the wiring diagrams, data sheets and migration or obsolescence details.

Revision Part # Also Known as Availability
2711P-T10C4D2/A, Series A, Rev A Request Quote
2711P-T10C4D2X
2711P-T10C4D2/X, Series X, Rev X Request Quote

Common misspellings:
  • 27l1P-T10C4D2
  • 271lP-T10C4D2
  • 2711P-Tl0C4D2
  • 2711P-T1oC4D2
  • 2711P-T10CAD2
  • 2711PT10C4D2
PDF
Resolutions

Resolutions For 2711P-T10C4D2

Size 10.4 inch (1000 color)
Input Type Keypad or Keypad/ Touch
Display Type Color active-matrix TFT
Display Size (Diagonal) 10.4 in.
Viewing Area 211 x 158 mm (8.3 x 6.2 in.)
Display Resolution 640 x 480, 18-bit color graphics
Typical Brightness 300 cd/m2 (Nits)
Reviews

Reviews for 2711P-T10C4D2

Internal Review

"The 2711P-T10C4D2 is a PanelView Plus 1000 operator terminal. This operator terminal features an upgraded internal RAM and Flash memory, having 128 MB RAM and 128 MB Flash compared to the 2711P-T10C4D1 which has 64 MB Flash and 64 MB RAM. With these upgraded memories, user can expect the terminal to operate even with a high-density graphics design. " -DO Supply Tech