|Warranty:||1 year DO Supply Warranty Included|
|Shipping:||Worldwide shipping via DHL, UPS, Fedex, and TNT|
|Repairs:||We offer repair service for the 2711P-K12C15A6.|
|Exchange:||Exchange credit for your defective unit available.|
The Allen-Bradley manufactured 2711P-K12C15A6 Panelview Plus keypad has a memory of 128 MB and features a ControlNet Communication AC Power CE Logic Module and a color display. The AC and DC terminal blocks of the 2711P-K12C15A6 are a keypad and are marked differently. This is to ensure that the markings are followed accurately. The terminal blocks should not also be forced into connectors so that potential damage to the terminal cannot be caused. The 2711P-K12C15A6 features an onboard software known as the FactoryTalk View ME Station. This software functions to configure terminal operations. The user can automatically enter the configuration mode when the terminal is reset or started. This step is not however necessary if the ".MER" application has been set to run on startup automatically. The Goto configuration Mode button of the 2711P-K12C15A6 terminal should be pressed in order for the configuration mode from a running application to be accessed.
While mounting the 2711P-K12C15A6 terminal in a panel, several steps should be followed. This includes cutting an opening in the terminal while using a panel cutout, ensuring that the sealing gasket of the terminal is properly positioned, installing the legend strips, and placing the terminal in the panel cutout. Slide the ends of the mounting clips into the slots, which are located on the terminal, tighten the clip screws, which are used for mounting by hand, while ensuring that the gasket seal has evenly come into contact with the mounting surface and tightening the mounting clip screws. Be careful not to over-tighten the screw.