2711P-T12W22D8S-B | Allen Bradley Panelview Plus 7

2711P-T12W22D8S-B

Rated 5 with 5 reviews

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.


credit cards accepted
better business bureau

2711P-T12W22D8S-B

Description: The Allen-Bradley/Rockwell Automation 2711P-T12W22D8S-B terminal is a standard operator interface terminal from the Allen-Bradley Panelview Plus 1250 series. It is a brandless Allen-Bradley terminal that operates with DC voltage and which is controlled by a touchscreen. The 2711P-T12W22D8S-B standard interface terminal�s touchscreen is a 12-inch analog-resistive touchscreen with color graphics and an approximate actuation rating of 1 million presses. It uses a non-isolated DC power supply and its voltage ratings include a nominal voltage rating of 24 Volts DC and an input voltage range from 18 to 30 Volts DC. The 2711P-T12W22D8S-B standard interface terminal�s touchscreen has a backlight that is not replaceable.
Available Now
Request a quote for 2711P-T12W22D8S-B

Description: The Allen-Bradley/Rockwell Automation 2711P-T12W22D8S-B terminal is a standard operator interface terminal from the Allen-Bradley Panelview Plus 1250 series. It is a brandless Allen-Bradley terminal that operates with DC voltage and which is controlled by a touchscreen. The 2711P-T12W22D8S-B standard interface terminal�s touchscreen is a 12-inch analog-resistive touchscreen with color graphics and an approximate actuation rating of 1 million presses. It uses a non-isolated DC power supply and its voltage ratings include a nominal voltage rating of 24 Volts DC and an input voltage range from 18 to 30 Volts DC. The 2711P-T12W22D8S-B standard interface terminal�s touchscreen has a backlight that is not replaceable.

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

disclaimer
credit cards
better business bureau

Warranty: 1 year DO Supply Warranty Included
Shipping: Worldwide shipping via UPS, DHL, and TNT
Repairs: We offer repair service for the 2711P-T12W22D8S-B.
Exchange: Exchange credit for your defective unit available.
Conditions: We sell preowned surplus and refurbished parts.

To speak to a sales representative for pricing & lead time:


Rated 5 with 5 reviews

    Technical Specifications for 2711P-T12W22D8S-B

ManufacturerRockwell Automation
BrandAllen-Bradley
Part Number/Catalog No.2711P-T12W22D8S-B
Product LinePanelview Plus 7
Input TypeTouchscreen
Display Size12.1 in.
Display ColorWide aspect ratio Color
Memory512 Mb
Input Voltage24 VDC
Backlight LED
Weight12.6 LBS
ManufacturerRockwell Automation
BrandAllen-Bradley
Part Number/Catalog No.2711P-T12W22D8S-B
Product LinePanelview Plus 7
Input TypeTouchscreen
Display Size12.1 in.
Display ColorWide aspect ratio Color
Memory512 Mb
Input Voltage24 VDC
Backlight LED
Weight12.6 LBS
s

About 2711P-T12W22D8S-B

The 2711P-T12W22D8S-B is a 12-inch Panel-View Plus 7 touchscreen operator interface. The display is a Color TFT LCD. The viewing area is about 261 x 164 mm. It displays a 1280 x 800 WXGA, with 18-bit color graphics. The 2711P-T12W22D8S-B has an aspect ratio of 5:3 with 300 nits of typical brightness. The LED backlight has up to 50,000 hours of battery life, but it is not replaceable. Its touchscreen is analog-resistive with a 1-million-press actuation rating. The touchscreen has an operating force of 100 grams and the battery lifespan is 4 years minimum at 25 °C. The battery can be replaced with a CR2032 lithium coin cell. Its RAM has a 512 MB capacity with approximately 80 MB of non-volatile storage for its applications. The power input is DC at 24V DC nominal. The 2711P-T12W22D8S-B runs on a non-isolated power supply that has a power consumption of 50W maximum. It weighs approximately 1.95 kg and measures 240 x 340 x 56.5 mm. Supported by DLR network Ethernet ports, its USP ports are 2.0 high-speed for the host port and 1.0 high-speed for the device. Its SD card slot can be replaced with an Allen-Bradley part number 1784-SD1 (1 GB) and 1784-SD2 (2 GB).



Technical Description of 2711P-T12W22D8S-B

The Allen-Bradley 2711P-T12W22D8S-B Panelview Plus 7 Operator Interface Standard Model, Touchscreen, 12.1 in. Wide aspect ratio Color DLR Ethernet Communication Port, with 24 VDC Power, HMI, Brandless Version.

Repair Services for 2711P-T12W22D8S-B

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 2711P-T12W22D8S-B. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Revisions for 2711P-T12W22D8S-B

Please refer to the manual for more information about the 2711P-T12W22D8S-B such as the wiring diagrams, data sheets and migration or obsolescence details.

Revision Part # Also Known as Availability
2711P-T12W22D8S-B/A, Series A, Rev A Request Quote
2711P-T12W22D8S-BX
2711P-T12W22D8S-B/X, Series X, Rev X Request Quote
Common misspellings:
  • 27l1P-T12W22D8S-B
  • 271lP-T12W22D8S-B
  • 2711P-Tl2W22D8S-B
  • 2711P-T12W22DbS-B
  • 2711P-T12W22D8S-8
  • 2711PT12W22D8SB

Dimensions For 2711P-T12W22D8S-B

Size 12.1 inch
Input Type Touch
Panel Cutout Height 218 mm (8.58 in)
Panel Cutout Width 312 mm (12.28 in)
Terminal Height 240 mm (9.65 in)
Terminal Width 340 mm (13.39 in)
Terminal Overall Depth 56.5 mm (2.22 in)
Terminal Mounted Depth 50.14 mm (1.97 in)

Dimensions For 2711P-T12W22D8S-B

Resolutions For 2711P-T12W22D8S-B

Size 12.1 inch
Input Type Touch
Display Type Color TFT LCD
Display Size (Diagonal) 12.1 in. widescreen
Viewing Area 261 x 163 mm
Display Resolution 1280 x 800 WXGA, 18-bit color graphics
Aspect Ratio 5:3
Typical Brightness 300 nits
About

Technical Specifications for 2711P-T12W22D8S-B

ManufacturerRockwell Automation
BrandAllen-Bradley
Part Number/Catalog No.2711P-T12W22D8S-B
Product LinePanelview Plus 7
Input TypeTouchscreen
Display Size12.1 in.
Display ColorWide aspect ratio Color
Memory512 Mb
Input Voltage24 VDC
Backlight LED
Weight12.6 LBS
ManufacturerRockwell Automation
BrandAllen-Bradley
Part Number/Catalog No.2711P-T12W22D8S-B
Product LinePanelview Plus 7
Input TypeTouchscreen
Display Size12.1 in.
Display ColorWide aspect ratio Color
Memory512 Mb
Input Voltage24 VDC
Backlight LED
Weight12.6 LBS

About 2711P-T12W22D8S-B

The 2711P-T12W22D8S-B is a 12-inch Panel-View Plus 7 touchscreen operator interface. The display is a Color TFT LCD. The viewing area is about 261 x 164 mm. It displays a 1280 x 800 WXGA, with 18-bit color graphics. The 2711P-T12W22D8S-B has an aspect ratio of 5:3 with 300 nits of typical brightness. The LED backlight has up to 50,000 hours of battery life, but it is not replaceable. Its touchscreen is analog-resistive with a 1-million-press actuation rating. The touchscreen has an operating force of 100 grams and the battery lifespan is 4 years minimum at 25 °C. The battery can be replaced with a CR2032 lithium coin cell. Its RAM has a 512 MB capacity with approximately 80 MB of non-volatile storage for its applications. The power input is DC at 24V DC nominal. The 2711P-T12W22D8S-B runs on a non-isolated power supply that has a power consumption of 50W maximum. It weighs approximately 1.95 kg and measures 240 x 340 x 56.5 mm. Supported by DLR network Ethernet ports, its USP ports are 2.0 high-speed for the host port and 1.0 high-speed for the device. Its SD card slot can be replaced with an Allen-Bradley part number 1784-SD1 (1 GB) and 1784-SD2 (2 GB).



Technical Description of 2711P-T12W22D8S-B

The Allen-Bradley 2711P-T12W22D8S-B Panelview Plus 7 Operator Interface Standard Model, Touchscreen, 12.1 in. Wide aspect ratio Color DLR Ethernet Communication Port, with 24 VDC Power, HMI, Brandless Version.
Repairs
Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 2711P-T12W22D8S-B. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 2711P-T12W22D8S-B. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Revisions

Please refer to the manual for more information about the 2711P-T12W22D8S-B such as the wiring diagrams, data sheets and migration or obsolescence details.

Revision Part # Also Known as Availability
2711P-T12W22D8S-B/A, Series A, Rev A Request Quote
2711P-T12W22D8S-BX
2711P-T12W22D8S-B/X, Series X, Rev X Request Quote

Common misspellings:
  • 27l1P-T12W22D8S-B
  • 271lP-T12W22D8S-B
  • 2711P-Tl2W22D8S-B
  • 2711P-T12W22DbS-B
  • 2711P-T12W22D8S-8
  • 2711PT12W22D8SB
PDF
Dimensions

Dimension For 2711P-T12W22D8S-B

Size 12.1 inch
Input Type Touch
Panel Cutout Height 218 mm (8.58 in)
Panel Cutout Width 312 mm (12.28 in)
Terminal Height 240 mm (9.65 in)
Terminal Width 340 mm (13.39 in)
Terminal Overall Depth 56.5 mm (2.22 in)
Terminal Mounted Depth 50.14 mm (1.97 in)
Resolutions

Resolutions For 2711P-T12W22D8S-B

Size 12.1 inch
Input Type Touch
Display Type Color TFT LCD
Display Size (Diagonal) 12.1 in. widescreen
Viewing Area 261 x 163 mm
Display Resolution 1280 x 800 WXGA, 18-bit color graphics
Aspect Ratio 5:3
Typical Brightness 300 nits