2711P-K7C4D1

The discontinued Allen Bradley Panelview Plus 700 2711P-K7C4D1 is an operator terminal that enables the user to interface with their machine. This HMI has a 6.5 in. Color Display. The user is able to control the HMI using the Keypad to input information and data. This unit is powered using 18-32 VDC power. This unit has an internal memory of 64 MB. It supports EtherNet/IP (Ethernet Industrial Protocol) that is an open industrial network that supports real time I/O messaging, as well as message exchange. The Ethernet port connects to a controller on an EtherNet/IP network by using both the network and standard Ethernet connections. The EtherNet/IP screen displays and allows the user to modify some of the EtherNet/IP communication settings for a PanelView terminal. The 2711P-RN20 Ethernet communication module is available for the 700 to 1500 terminals if another Ethernet port is required. The module has its own unique IP address. This port has an RJ45, 10/100Base-T connector for network communication and supports MDI/MDI-X connections. The parameters are downloaded with the application.

The Allen-Bradley 2711P-K7C4D1 is part of the PanelView Plus product family. This operator terminal is specifically part of the PanelView Plus 700 product sub-category. This device is used to allow operators and plant personnel to control and monitor a machine or process through a central, convenient location in the factory floor. It eliminates the need of physically approaching each instrument to read measurements and operate each device.

The 2711P-K7C4D1 comes with a 64 MB logic module. Additionally, it may be installed with an external CompactFlash storage with up to 512 MB of removable memory. This device uses an internal battery for Real-Time Clock (RTC) battery back-up. The battery has a four (4) year minimum lifespan when the device is operated at 25 degrees Celsius or 77 degrees Fahrenheit. The battery-backed RTC has an accuracy of +/- 2 minutes per month. For troubleshooting, the 2711P-K7C4D1 comes with two (2) LED indicators for Communication (GREEN) and Fault (RED).

The 2711P-K7C4D1 has a 6.5-inch colored display screen. It has a display area of 132 x 99 millimeters (5.2 x 3.9 inches) and a resolution of 640 x 480 pixels. It has a physical dimension of 193 x 290 x 55 millimeters (7.58 x 11.40 x 2.18 inches) and approximate weight of 1.9 kilograms (4.2 pounds). It is approved for installation in application areas identified as Class I, Div 2, Group A, B, C, D; Class I, Zone 2, Group IIC; Class II, Div 2 Groups F, G and Class III Hazardous Locations. It must be installed to an enclosure which offers protection rating of equivalent to NEMA Type 12, 13, 4X (Indoor use only), IP54, and IP65.