Free UPS Ground on All Orders!
+1 (919) 205-4392
Allen Bradley Panelview Plus 700 2711P-T7C4A1

Product image is representative; revision or series may vary. Contact us to request a specific version.

2711P-T7C4A1

|

The Allen-Bradley 2711P-T7C4A1 is a PanelView Plus 700 Operator Terminal. This operator terminal is powered by an external 85-264VAC supply voltage and has a 6.5-inch colored display with embedded RS232 and Ethernet communication ports. This operator terminal has a Touchscreen input interface.

In Stock
Ships from Raleigh, NC
2 Year DO Supply Warranty
Not an Authorized Distributor: DO Supply is not an authorized distributor for listed manufacturers or tradenames and therefore the manufacturer's warranty does not apply. All of our products come with DO Supply's 2-year warranty.
Learn more
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Technical specifications for 2711P-T7C4A1

ManufacturerAllen Bradley
Product TypePanelView Plus 700 Operator Terminals
Product LinePanelview Plus 700
Part Number2711P-T7C4A1
UPC612598338863
Weight4.00 lbs (1.81 kg)
Display Size6.5 in. inches
BacklightCCFL 50,000 hours life, min.
Product FamilyPanelView Plus Operator Terminals
Operator InputTouch
Display TypeColor active matrix, thin-film transistor (TFT) with liquid crystal display (LCD)
Lifecycle statusDiscontinued
Display Area132 x 99 mm (5.2 x 3.9 in.)
Resolution640 x 480
Toiuchscreen1 million presses
Actuation force10-110 g
Internal memory64MB Flash Memory / 64MB Random Access Memory
Integrated portsEthernet, Data Highway Plus (DH+), Remote I/O (RIO), DH485, RS232, USB communication ports.
Frequency47-63 Hz
Display ColorColor
Input TypeTouchscreen
CommunicationEthernet and RS-232
Input Power85-264 VAC
Memory64 MB
Communication Cable1761-NET-ENI
SeriesSeries A, B, C, D, E, F, G
Product Lifecycle Status*Discontinued/Obsolete

* The Allen Bradley 2711P-T7C4A1 has been discontinued by the manufacturer, however we specialize in obsolete parts and can likely still supply surplus and/or refurbished replacement 2711P-T7C4A1 units instead of migration.

The Allen-Bradley 2711P-T7C4A1 is an AC powered PanelView Plus 700 graphic operator terminal. This operator terminal has an electronic circuitry designed to be operated by an external AC supply voltage range of 85-264VAC. It comes with an embedded RS232 and Ethernet communication ports as standard communication interfaces along a 6.5-inch colored display screen with embedded analog-resistive touch surface.

This operator terminal is part of Allen-Bradley’s Human Interface solution of integrating factory floor controllers and providing a centralized monitoring and communication station in the plant level area. It specifically belongs to the PanelView Plus 700 operator terminals however, this product family has reached product obsolescence.

Aside from the embedded features previously mentions, this operator terminal comes with a 64 MB Random Access Memory (RAM) that is used by the terminal during runtime interface. For file storage such as recipes, trends, logs and application backup, the 2711P-T7C4A1 has a 64MB Flash memory.

This operator has a rugged and assembly that allows installation of accessory components, Some of these include display modules, logic modules, communication modules among others. It is designed to be installed in horizontal orientation, flush mounted to a NEMA or IP rated enclosure. Specifically, appropriate enclosure ratings are NEMA Type 12, 13, 4X (Indoor use only), IP54, IP65. It has a heat dissipation of 240 BTU/hr and relative humidity of 5…95% without condensation. It may be operated in temperature range of 0…55 °C (32…131 °F) and stored in a warehouse or storage room with temperature of -25…70 °C (-13…158 °F).

The approximate shipping weight and dimensions are 8 lbs. and 14 x 11 x 8 in. It has an EtherNet/IP and RS232 communication ports for connecting with process controlelrs. Ethernet supports real time I/O messaging, as well as message exchange. The EtherNet/IP screen displays and allows the user to modify some of the EtherNet/IP communication settings for a PanelView terminal. The module has its own unique IP address. This port has an RJ45, 10/100Base-T connector for network communication and supports MDI/MDI-X connections. The parameters are downloaded with the application.

Revision Part #Also known as
2711P-T7C4A1 Ser A2711P-T7C4A1/A, Series A, Rev A
2711P-T7C4A1X2711P-T7C4A1/X, Series X, Rev X
Don't see your particular revision? Contact us now.