Free UPS Ground on All Orders!
+1 (919) 205-4392
Allen Bradley Panelview Plus 6 2711P-K4M20A8

Product image is representative; revision or series may vary. Contact us to request a specific version.

2711P-K4M20A8

|

The Allen-Bradley 2711P-K4M20A8 terminal is a display terminal that is available from the Allen-Bradley PanelView Plus 6 series of terminals. Its display screen is 3.5 inches wide and its graphics are grayscale graphics. The 2711P-K4M20A8 terminal does not support a touchscreen, but it has a keypad for control. It also has 256 MB of RAM. The 2711P-K4M20A8 terminal has Ethernet and RS-232 communication ports as well as USB host and USB device ports.

In Stock
Ships from Raleigh, NC
2 Year DO Supply Warranty
Not an Authorized Distributor: DO Supply is not an authorized distributor for listed manufacturers or tradenames and therefore the manufacturer's warranty does not apply. All of our products come with DO Supply's 2-year warranty.
Learn more
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Technical specifications for 2711P-K4M20A8

ManufacturerAllen Bradley
CategoryPanelviews
Product LinePanelview Plus 6
Part Number2711P-K4M20A8
UPC884951344808
Weight1.25 lbs (0.57 kg)
BacklightWhite LED, not replaceable; 25,000 hours min at 25 °C (77 °F)
Display Size3.5 inches
Product FamilyPanelView Plus 6 Graphic Terminals
Display TypeGrayscale TFT LCD
Display Area70 x 53 mm (2.8 x 2.3 in.)
Resolution320 x 240, 16-levels gray
Keypad8 function keys (F1…F8), Numeric input, navigation
System Memory256 MB RAM, 512 MB nonvolatile memory (approx. 73 MB free user memory)
Communication portsEthernet (10/100 Mbps, Auto-MDI/MDI-X), RS-232, 1 USB host, 1 USB device port
External storageSecure Digital (SD) card, cat. no.1784-SDx, supported by hot-swappable SD card slot USB flash drive that is supported by high-speed, hot-swappable, 2.0 USB host port
Input Voltage range100 to 240V AC, 50 to 60 Hz
Power Consumption35VA max, 20VA typical
Display ColorMonochrome
Input TypeKeypad
CommunicationEthernet and RS-232
Input Power100-240 VAC
Memory256 MB RAM
Communication Cable2711-NC14
SeriesSeries A and Series B

The Allen-Bradley 2711P-K4M20A8 is part PanelView Plus 6 400 Monochrome operator terminal. This operator terminal or Human Machine Interface (HMI) device is ideally used in micro and small automation requirements. It is a compact electronic device that permits addition of components as required by the process.

The 2711P-K4M20A8 is powered by an external supply voltage ranging 100-240V AC along frequency of 50-60 Hz. It has a maximum power consumption of 35VA and typical consumption of 20VA. This operator terminal comes with a Battery-backed clock that timestamps critical data with accuracy of ±2 minutes per month. The battery is expected to last up to 4 years when operated at a minimum temperature of min at 25 °C (77 °F). This battery is field replaceable with catalog number 2711P-RY2032 or any equivalent CR2032 coin-cell lithium battery.

The 2711P-K4M20A8 has a system memory amounting to 256 Random Access Memory (RAM) and 512 Non-volatile memory with approximately 73 MB free user memory. This system memory may be expanded by installation of a Secure Digital (SD) Card. USB flash drives may also serve as removable storage by inserting to any of the available USB ports.

This operator terminal comes with a variety of communication interfaces such as One (1) RS232 and One (1) Ethernet communication ports. Two (2) USB ports are also available that permits installation of USB and keyboard and USB as mentioned previously.

The 2711P-K4M20A8 has a visualization screen that is a Monochrome LCD and Keypad assembly provided as the main operator interface.

The Ethernet/IP (Ethernet Industrial Protocol) is an open industrial network that supports real time I/O messaging, as well as message exchange. The Ethernet port connects to a controller on an EtherNet/IP network by using both the network and standard Ethernet connections. This port can work with application transfers and printing as well. The 2711P-RN20 Ethernet communication module is available for the 700 to 1500 terminals if another Ethernet port is required. The module has its own unique IP address. This port has an RJ45, 10/100Base-T connector for network communication and supports MDI/MDI-X connections. The parameters are downloaded with the application.

Revision Part #Also known as
2711P-K4M20A8 Ser A2711P-K4M20A8/A, Series A, Rev A
2711P-K4M20A8X2711P-K4M20A8/X, Series X, Rev X
Don't see your particular revision? Contact us now.