2711P-T6M20A8 | Allen Bradley Panelview Plus 6

×

2711P-T6M20A8

Rated 4.4 with 24 reviews
About | Product Specifications | FAQ

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.


credit cards accepted
better business bureau

2711P-T6M20A8

Description: The Allen-Bradley 2711P-T6M20A8 is an Allen-Bradley PanelView Plus 6 600 Operator Terminal. This operator terminal is powered by an external 100-240VAC supply voltage and has a 5.7-inch grayscale display with embedded Ethernet, RS-232 and Two (2) USB ports. This operator terminal has a keypad and touchscreen input interface.
Available Now
Request a quote for 2711P-T6M20A8

Description: The Allen-Bradley 2711P-T6M20A8 is an Allen-Bradley PanelView Plus 6 600 Operator Terminal. This operator terminal is powered by an external 100-240VAC supply voltage and has a 5.7-inch grayscale display with embedded Ethernet, RS-232 and Two (2) USB ports. This operator terminal has a keypad and touchscreen input interface.
About | Products Specs | FAQ

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

disclaimer
credit cards
better business bureau

Warranty: 1 year DO Supply Warranty Included
Shipping: Worldwide shipping via UPS, DHL, and TNT
Repairs: We offer repair service for the 2711P-T6M20A8.
Exchange: Exchange credit for your defective unit available.
Conditions: We sell preowned surplus and refurbished parts.

To speak to a sales representative for pricing & lead time:


Rated 4.4 with 24 reviews

    Technical Specifications for 2711P-T6M20A8

ManufacturerRockwell Automation
BrandAllen-Bradley
Input Voltage range:100-240VAC; 47-63 Hz
Integrated ports:Ethernet, RS-232, 2 USB host
Internal memory:256 MB RAM, 512 MB nonvolatile memory (approx. 79 MB free user memory)
Touch:Analog Resistive
Resolution:320 x 240, 18-bit color
Display Area:115 x 86 mm (4.5 x 3.4 in.)
Lifecycle status:End of life
Display Type:Grayscale TFT LCD
Operator Input:Touch
Product Type:PanelView Plus 6 600 Compact Terminals
Product Family:PanelView Plus 6 Compact Terminals
Part Number/Catalog No.2711P-T6M20A8
Display Size5.7 in.
BacklightWhite LED, not replaceable; 25,000 hours min at 25 °C (77 °F)
Product LinePanelview 6 Plus
Display ColorMonochrome
Input TypeTouchscreen
CommunicationEthernet and RS-232
Input Power100-240 VAC
Memory256 MB RAM
Communication Cable2711-NC13
Shipping Weight6 lbs.
Shipping Dimensions14 x 11 x 8 in
SeriesSeries A and Series B
ManufacturerRockwell Automation
BrandAllen-Bradley
Input Voltage range:100-240VAC; 47-63 Hz
Integrated ports:Ethernet, RS-232, 2 USB host
Internal memory:256 MB RAM, 512 MB nonvolatile memory (approx. 79 MB free user memory)
Touch:Analog Resistive
Resolution:320 x 240, 18-bit color
Display Area:115 x 86 mm (4.5 x 3.4 in.)
Lifecycle status:End of life
Display Type:Grayscale TFT LCD
Operator Input:Touch
Product Type:PanelView Plus 6 600 Compact Terminals
Product Family:PanelView Plus 6 Compact Terminals
Part Number/Catalog No.2711P-T6M20A8
Display Size5.7 in.
BacklightWhite LED, not replaceable; 25,000 hours min at 25 °C (77 °F)
Product LinePanelview 6 Plus
Display ColorMonochrome
Input TypeTouchscreen
CommunicationEthernet and RS-232
Input Power100-240 VAC
Memory256 MB RAM
Communication Cable2711-NC13
Shipping Weight6 lbs.
Shipping Dimensions14 x 11 x 8 in
SeriesSeries A and Series B
s

About 2711P-T6M20A8

The current Allen Bradley Panelview 6 Plus 2711P-T6M20A8 is an HMI that allows the user to interact with their machine. This operator interface has a 5.7 in. Monochrome Display. The user is able to control the operator interface by utilizing the Touchscreen to input information and data. This unit is powered using 100-240 VAC power. This unit has the following internal memory 256 MB RAM. The approximate shipping weight and dimensions are 6 lbs. and 14 x 11 x 8 in. EtherNet/IP (Ethernet Industrial Protocol) is an open industrial network that supports real time I/O messaging, as well as message exchange. The Ethernet port connects to a controller on an EtherNet/IP network by using both the network and standard Ethernet connections. This port can work with application transfers and printing as well. The EtherNet/IP screen displays and allows the user to modify some of the EtherNet/IP communication settings for a PanelView terminal. The 2711P-RN20 Ethernet communication module is available for the 700 to 1500 terminals if another Ethernet port is required. The module has its own unique IP address. This port has an RJ45, 10/100Base-T connector for network communication and supports MDI/MDI-X connections. The parameters are downloaded with the application.

The 2711P-T6M20A8 features a monochrome display screen with diagonal measurement of 5.7- inch display screen. This Human Machine Interface (HMI) is ideal for small and simple industrial application as the monochrome screen provides a limited level of information. This operator terminal is equipped with a touch input interface that is recommended to be operated with a gloved finger or stylus, with an actuation force of 10-110 g. The touch input interface has a built-in calibration sequence that can be launched through the HMI panel’s configuration environment. This touch interface is rated up to 1 million actuations. To power up this operator terminal, it must be supplied with an external voltage of 100-240VAC with frequency of 47-63 Hz. It has a rated maximum power consumption of 35VA with typical value of 20VA.

This operator terminal is provided with internal memory areas pre-allocated for 256 MB Random Access Memory (RAM) and 512 MB non-volatile memory with 79 MB free user memory. It may be installed with Secure Digital (SD) cards to the provided SD card slot for memory and hot-swappable removable storage.

FAQ for 2711P-T6M20A8

Does this operator terminal capable of opening user manuals in PDF format?


Yes. It has a PDF reader capability.

What is the Windows CE version installed with the 2711P-T6M20D8?


It has a basic version of Windows CE 6.0 installed.

Does this operator terminal support installation of peripheral devices such as USB keyboard and mouse?


Yes. USB keyboard and mouse may be connected to any of the available USB ports.

Technical Description of 2711P-T6M20A8

Allen-Bradley 2711P-T6M20A8 PanelView Plus 6 Operator interface , 600 Terminal, with Touchscreen, Grayscale Display, Ethernet and RS-232 Communication, AC Powered Unit.

Repair Services for 2711P-T6M20A8

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

We Can Repair Your Panelview Plus 6

We have a team of highly trained technicians that can repair your Panelview Plus 6 quickly at a great low price. To get a repair quote call 1-800-730-0292 or email sales@dosupply.com. Some of the benefits of our repair process includes:

  • Repair Turnaround of 3-5 Days for Most Panelview Plus 6
  • Rush Repairs of 1-3 Days
  • Fast Return of Your Repair via UPS, FedEx, or DHL.
  • If the item is not repairable, you can choose to have it returned to you free of charge or it can be counted as an exchange credit toward a refurbished or surplus unit if available.
  • Wide range of repairs that can be completed by our highly skilled technicians as shown below.
  • All Repairs Come With Our 1-Year Warranty!

We Can Repair Your Hardware Failures Including:

  • Communication Failures
  • Broken Toushcreens/Keypads
  • Broken Glass
  • Displays (Dead/Dim/Lines/Missing Pixels)
  • Dead Backlights
  • Broken Housing/Bezel
  • Power Board Failures

Revisions for 2711P-T6M20A8

Please refer to the manual for more information about the 2711P-T6M20A8 such as the wiring diagrams, data sheets and migration or obsolescence details.

Revision Part # Also Known as Availability
2711P-T6M20A8 Ser A
2711P-T6M20A8/A, Series A, Rev A Request Quote
2711P-T6M20A8X
2711P-T6M20A8/X, Series X, Rev X Request Quote
Common misspellings:
  • 27l1P-T6M20A8
  • 271lP-T6M20A8
  • 2711P-T6M2oA8
  • 2711P-T6M20Ab
  • 2711PT6M20A8

Reviews for 2711P-T6M20A8

User Input Method

"This PV Plus 6 has Touch Input, but has no keypad input. " -DO Supply Tech

Internal Review

"The 2711P-T6M20A8 is an Allen-Bradley operator terminal that features a monochrome display screen and a touch input interface. This operator terminal is ideal for use in small applications as it only has a limited display and comes with a monochrome screen. With a monochrome screen, limited display information is supported as it cannot implement color coded graphics however, in term of cost, this operator terminal may cost lower compared to the colored versions. " -DO Supply Tech

Dimensions For 2711P-T6M20A8

Size 5.7 inch 600 Grayscale
Input Type Keypad or Keypad/ Touch
Panel Cutout Height 142 mm (5.61 in)
Panel Cutout Width 241 mm (9.50 in)
Terminal Height 167 mm (6.58 in)
Terminal Width 266 mm (10.47 in)
Terminal Overall Depth 68 mm (2.68 in)
Terminal Mounted Depth 98 mm (3.36 in)

Dimensions For 2711P-T6M20A8

Resolutions For 2711P-T6M20A8

Size 5.7 inch 600 Grayscale
Input Type Keypad or Keypad/ Touch
Display Type Grayscale TFT LCD
Display Size (Diagonal) 5.7 in.
Viewing Area 115 x 86 mm (4.5 x 3.4 in.)
Display Resolution 320 x 240, 16-levels gray
Typical Brightness 440 cd/m2 (Nits)
About

Technical Specifications for 2711P-T6M20A8

ManufacturerRockwell Automation
BrandAllen-Bradley
Input Voltage range:100-240VAC; 47-63 Hz
Integrated ports:Ethernet, RS-232, 2 USB host
Internal memory:256 MB RAM, 512 MB nonvolatile memory (approx. 79 MB free user memory)
Touch:Analog Resistive
Resolution:320 x 240, 18-bit color
Display Area:115 x 86 mm (4.5 x 3.4 in.)
Lifecycle status:End of life
Display Type:Grayscale TFT LCD
Operator Input:Touch
Product Type:PanelView Plus 6 600 Compact Terminals
Product Family:PanelView Plus 6 Compact Terminals
Part Number/Catalog No.2711P-T6M20A8
Display Size5.7 in.
BacklightWhite LED, not replaceable; 25,000 hours min at 25 °C (77 °F)
Product LinePanelview 6 Plus
Display ColorMonochrome
Input TypeTouchscreen
CommunicationEthernet and RS-232
Input Power100-240 VAC
Memory256 MB RAM
Communication Cable2711-NC13
Shipping Weight6 lbs.
Shipping Dimensions14 x 11 x 8 in
SeriesSeries A and Series B
ManufacturerRockwell Automation
BrandAllen-Bradley
Input Voltage range:100-240VAC; 47-63 Hz
Integrated ports:Ethernet, RS-232, 2 USB host
Internal memory:256 MB RAM, 512 MB nonvolatile memory (approx. 79 MB free user memory)
Touch:Analog Resistive
Resolution:320 x 240, 18-bit color
Display Area:115 x 86 mm (4.5 x 3.4 in.)
Lifecycle status:End of life
Display Type:Grayscale TFT LCD
Operator Input:Touch
Product Type:PanelView Plus 6 600 Compact Terminals
Product Family:PanelView Plus 6 Compact Terminals
Part Number/Catalog No.2711P-T6M20A8
Display Size5.7 in.
BacklightWhite LED, not replaceable; 25,000 hours min at 25 °C (77 °F)
Product LinePanelview 6 Plus
Display ColorMonochrome
Input TypeTouchscreen
CommunicationEthernet and RS-232
Input Power100-240 VAC
Memory256 MB RAM
Communication Cable2711-NC13
Shipping Weight6 lbs.
Shipping Dimensions14 x 11 x 8 in
SeriesSeries A and Series B

About 2711P-T6M20A8

The current Allen Bradley Panelview 6 Plus 2711P-T6M20A8 is an HMI that allows the user to interact with their machine. This operator interface has a 5.7 in. Monochrome Display. The user is able to control the operator interface by utilizing the Touchscreen to input information and data. This unit is powered using 100-240 VAC power. This unit has the following internal memory 256 MB RAM. The approximate shipping weight and dimensions are 6 lbs. and 14 x 11 x 8 in. EtherNet/IP (Ethernet Industrial Protocol) is an open industrial network that supports real time I/O messaging, as well as message exchange. The Ethernet port connects to a controller on an EtherNet/IP network by using both the network and standard Ethernet connections. This port can work with application transfers and printing as well. The EtherNet/IP screen displays and allows the user to modify some of the EtherNet/IP communication settings for a PanelView terminal. The 2711P-RN20 Ethernet communication module is available for the 700 to 1500 terminals if another Ethernet port is required. The module has its own unique IP address. This port has an RJ45, 10/100Base-T connector for network communication and supports MDI/MDI-X connections. The parameters are downloaded with the application.

The 2711P-T6M20A8 features a monochrome display screen with diagonal measurement of 5.7- inch display screen. This Human Machine Interface (HMI) is ideal for small and simple industrial application as the monochrome screen provides a limited level of information. This operator terminal is equipped with a touch input interface that is recommended to be operated with a gloved finger or stylus, with an actuation force of 10-110 g. The touch input interface has a built-in calibration sequence that can be launched through the HMI panel’s configuration environment. This touch interface is rated up to 1 million actuations. To power up this operator terminal, it must be supplied with an external voltage of 100-240VAC with frequency of 47-63 Hz. It has a rated maximum power consumption of 35VA with typical value of 20VA.

This operator terminal is provided with internal memory areas pre-allocated for 256 MB Random Access Memory (RAM) and 512 MB non-volatile memory with 79 MB free user memory. It may be installed with Secure Digital (SD) cards to the provided SD card slot for memory and hot-swappable removable storage.

FAQ for 2711P-T6M20A8

Does this operator terminal capable of opening user manuals in PDF format?


Yes. It has a PDF reader capability.

What is the Windows CE version installed with the 2711P-T6M20D8?


It has a basic version of Windows CE 6.0 installed.

Does this operator terminal support installation of peripheral devices such as USB keyboard and mouse?


Yes. USB keyboard and mouse may be connected to any of the available USB ports.

Technical Description of 2711P-T6M20A8

Allen-Bradley 2711P-T6M20A8 PanelView Plus 6 Operator interface , 600 Terminal, with Touchscreen, Grayscale Display, Ethernet and RS-232 Communication, AC Powered Unit.
Repairs
Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

We Can Repair Your Panelview Plus 6

We have a team of highly trained technicians that can repair your Panelview Plus 6 quickly at a great low price. To get a repair quote call 1-800-730-0292 or email sales@dosupply.com. Some of the benefits of our repair process includes:

  • Repair Turnaround of 3-5 Days for Most Panelview Plus 6
  • Rush Repairs of 1-3 Days
  • Fast Return of Your Repair via UPS, FedEx, or DHL.
  • If the item is not repairable, you can choose to have it returned to you free of charge or it can be counted as an exchange credit toward a refurbished or surplus unit if available.
  • Wide range of repairs that can be completed by our highly skilled technicians as shown below.
  • All Repairs Come With Our 1-Year Warranty!

We Can Repair Your Hardware Failures Including:

  • Communication Failures
  • Broken Toushcreens/Keypads
  • Broken Glass
  • Displays (Dead/Dim/Lines/Missing Pixels)
  • Dead Backlights
  • Broken Housing/Bezel
  • Power Board Failures
Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

We Can Repair Your Panelview Plus 6

We have a team of highly trained technicians that can repair your Panelview Plus 6 quickly at a great low price. To get a repair quote call 1-800-730-0292 or email sales@dosupply.com. Some of the benefits of our repair process includes:

  • Repair Turnaround of 3-5 Days for Most Panelview Plus 6
  • Rush Repairs of 1-3 Days
  • Fast Return of Your Repair via UPS, FedEx, or DHL.
  • If the item is not repairable, you can choose to have it returned to you free of charge or it can be counted as an exchange credit toward a refurbished or surplus unit if available.
  • Wide range of repairs that can be completed by our highly skilled technicians as shown below.
  • All Repairs Come With Our 1-Year Warranty!

We Can Repair Your Hardware Failures Including:

  • Communication Failures
  • Broken Toushcreens/Keypads
  • Broken Glass
  • Displays (Dead/Dim/Lines/Missing Pixels)
  • Dead Backlights
  • Broken Housing/Bezel
  • Power Board Failures
Revisions

Please refer to the manual for more information about the 2711P-T6M20A8 such as the wiring diagrams, data sheets and migration or obsolescence details.

Revision Part # Also Known as Availability
2711P-T6M20A8 Ser A
2711P-T6M20A8/A, Series A, Rev A Request Quote
2711P-T6M20A8X
2711P-T6M20A8/X, Series X, Rev X Request Quote

Common misspellings:
  • 27l1P-T6M20A8
  • 271lP-T6M20A8
  • 2711P-T6M2oA8
  • 2711P-T6M20Ab
  • 2711PT6M20A8
PDF
2711P-T6M20A8 PDF
Dimensions

Dimension For 2711P-T6M20A8

Size 5.7 inch 600 Grayscale
Input Type Keypad or Keypad/ Touch
Panel Cutout Height 142 mm (5.61 in)
Panel Cutout Width 241 mm (9.50 in)
Terminal Height 167 mm (6.58 in)
Terminal Width 266 mm (10.47 in)
Terminal Overall Depth 68 mm (2.68 in)
Terminal Mounted Depth 98 mm (3.36 in)
Resolutions

Resolutions For 2711P-T6M20A8

Size 5.7 inch 600 Grayscale
Input Type Keypad or Keypad/ Touch
Display Type Grayscale TFT LCD
Display Size (Diagonal) 5.7 in.
Viewing Area 115 x 86 mm (4.5 x 3.4 in.)
Display Resolution 320 x 240, 16-levels gray
Typical Brightness 440 cd/m2 (Nits)
Reviews

Reviews for 2711P-T6M20A8

User Input Method

"This PV Plus 6 has Touch Input, but has no keypad input. " -DO Supply Tech

Internal Review

"The 2711P-T6M20A8 is an Allen-Bradley operator terminal that features a monochrome display screen and a touch input interface. This operator terminal is ideal for use in small applications as it only has a limited display and comes with a monochrome screen. With a monochrome screen, limited display information is supported as it cannot implement color coded graphics however, in term of cost, this operator terminal may cost lower compared to the colored versions. " -DO Supply Tech