S801+R13N3S

The S801+R13N3S soft starter from the Eaton S801 series has a current rating of 135 Amps and its operating voltage range is from 200 to 600 Volts AC. The main application for this soft starter is 3-phase motor control. The S801+R13N3S soft starter is an R Frame starter with 3 poles and it supports 47 to 63 Hertz of operating frequency. The operating temperature range is from -40 to 50 degrees Celsius. The wire size recommended for terminations on the soft starter is #22-14 AWG. The dimensions of the R Frame starter are 6.6 x 4.3 x 7.9 inches. The approximate weight of the unit is 10.5 pounds. The S801+R13N3S soft starter supports the following starting methods: the soft start, full voltage start, and the wye-delta start. The standard-duty rating for the S801+R13N3S soft starter at 230 Volts AC is 40 kilowatts, at 380 to 400 Volts AC, it is 63 kilowatts and at 440 Volts AC, it is 80 kilowatts.

The S801+R13N3S soft starter should be stored in a location where the ambient temperature range is between –50 and 70 degrees Celsius, the relative humidity is between 0 and 95%, the environment is clean, dry and non-corrosive, and where the unit will be protected from shocks exceeding 15 G or vibrations exceeding 3 G. The packaging used for the shipping of the S801+R13N3S soft starter should be able to adequately protect the device. The S801+R13N3S soft starter is installed inside a cabinet or a panel and it can be mounted in any orientation. Bolts are needed for mounting the starter, and at least 4 bolts with 0.25-inch diameters (Grade 5) and with 0.625-inch lengths are required.