S811+V42N3S

The Eaton S811+V42N3S soft starter is a starter that provides motor control and protection. It has been designed specifically to start, accelerate, and decelerate a motor while always controlling the motor’s loads and the amount of power that is used. It has been designed by the Eaton Corporation and included in the Eaton S811 series of soft motor starters. Some of the most remarkable features of this starter are a built-in run bypass contactor, built-in overload protection, adjustable ramp times, and kick start control. The Eaton S811+V42N3S soft starter provides a current rating of 420 Amps and a voltage range of 200 to 600 Volts AC. This voltage is applied to 3-phase motors that are fully compatible with these specifications, including a frequency of 60 Hertz. With this current and this power source, the S811+V42N3S soft starter is a powerful soft starter despite its size.

The S811+V42N3S soft starter requires a power source of 24 Volts DC in order to perform operations in a safe way for all the equipment involved. The Eaton S811+V42N3S soft starter has a frame size of 290 millimeters and it comes enclosed in an IP 20 enclosure. This housing impedes the entrance of dust particles and it provides a mounting mechanism. It is important to install this soft starter, along with the motor, in a well-ventilated environment. This kind of equipment tends to release heat, so the cables should be well selected and so should the surface where the soft starter is going to be mounted. This soft starter has a pump control option and an analog interface. It also comes in a smaller size than standard soft starters.