D100CA20

The D100CA20 is a programmer controller that belongs to the A1 series manufactured by Cutler-Hammer. It is equipped with an I/O Module and is powered by an input voltage of 115 Volts AC. This 20 I/O controller has a 24 Volt DC triac output. The D100CA20 has a PROM writer feature. It also has analog capabilities, which allow it to monitor and control at the same time. Using the D100CA20 module, users are able to control the applications of the parts that are attached to it as well as interface with the machine. The weight of this part is around 3.00 pounds; its height is 10 inches, its width 4 inches, and its length is 5 inches. The D100CA20 comes with a high-speed counter that can count up to 4 kHz. The D100CA20 is best installed in a temperature controlled environment and connected to the computer or machinery that it is meant to operate by using cable wires. The D100CA20 is installed by applying the required software to a computer system; this software is provided to users by the Cutler-Hammer brand. The D100CA20 is used to transfer information, as well as to monitor and control the functionality of certain parts, such as expanders. Note that the D100CA20 should be connected to a computer before an expansion unit is attached. It has the features of a programmer module and can be used as one on a relatively small industrial scale. The LCD display built into the D100CA20 makes it most appropriate for microprogramming.