The D100 Micro Programmable Logic Controller series is a controller device series manufactured by Eaton Cutler-Hammer. These controllers are equipped with a central processing unit, power supply, memory module, and input/output circuitry for other terminals. These logic controllers are used to control counters, step sequences, flip-flop functions, 1-shot functions, master control functions, and timers. The D100 series controllers are available in a wide range of variants and they can be used to control a wide spectrum of applications. The logic controllers are compact in size and cost-effective. They have exceptional expansion abilities with 14 to 120 I/O. The D100 Micro Programmable Logic Controllers make use of true ladder logic programming. The controllers have the ability to display 8 runs of logic at a single time. The front of the controller is equipped with a large LCD screen.
The D100 Micro Programmable Logic Controllers are used to monitor the operation of the whole machine system. Timers and counter registers can also be observed in real-time. The logic controllers are equipped with analog input modules, protocol modules, multidrop modules, RS 232 converters, and timer/counter access modules. The logic controllers are manufactured in different configurations to meet different requirements. They are available with 115 Volts AC and 24 Volts DC power supplies. A maximum of 12 inputs are supported by different controller variants. The D100 Micro Programmable Logic Controllers come with different system I/O capacities, disk sizes, and power supply ratings. All of the controllers use a lithium-ion battery rated at 3 Volts with 1200 mA. The controllers can only be operated in a temperature range between 0 and 60 degrees Celsius. They can be mounted either vertically or horizontally. There should be enough space around the controllers so that they can be properly ventilated.
Browse available units in our catalog of D100 Micro Programmable Logic Controllers.