Free UPS Ground on All Orders!
Request a
Fast Quote
Account
Cart
Quote
+1 (919) 205-4392
Eaton Cutler-Hammer D100 Micro Programmable Logic Controllers D100CRA40A

Product image is representative; revision or series may vary. Contact us to request a specific version.

D100CRA40A

|
Need a Specific Revision?

The Eaton - Cutler-Hammer D100CRA40A is part of the D100 Programmable Logic Controller (PLC) product family. It has Twenty-Four (24) 115 VAC input channels and Sixteen (16) Triac outputs. This controller uses the D100 EE10 PROM. It is powered by an external supply voltage of 115VAC. This PLC is configured using the D100 programming software.

Call for an immediate quote
2 Year DO Supply Warranty
Available
Ships from Raleigh, NC
Not an Authorized Distributor: DO Supply is not an authorized distributor for listed manufacturers or tradenames and therefore the manufacturer's warranty does not apply. All of our products come with DO Supply's 2-year warranty.
Learn more

Technical specifications for D100CRA40A

ManufacturerEaton Cutler-Hammer
Product Type40 I/O Controller
Product LineD100 Micro Programmable Logic Controllers
Part NumberD100CRA40A
Weight3.25 lbs (1.47 kg)
Power Supply115V AC
InputsTwenty-Four (24)
Input Type115V AC
OutputsSixteen (16)
Output TypeTriac
System Max I/O Inputs48
System Max. I/O Outputs32
CapabilityHigh Speed Count and Analog
Product FamilyD100 Micro PLC
Compatible EEPROMD100EE10
View as PDF
Request a Repair

The D100CRA40A is a Programmable Logic Controller (PLC) that is part of the Eaton-Cutler Hammer Corporation. This electronic product is microprocessor based device which is part of the D100 product series and especially compatible for automation of micro and small applications.

The D100CRA40A is an obsolete product which means this product is a spare part for any existing installation. It may be programmed using the D100 programming software, supplied with a 5 ¼ or 3 ½ inch disk. To connect an IBM computer that runs the D100 programming software, the D100CRA40A must be installed with a protocol module which is an add-on module with RS232 communication interface. It supports programming using the ladder language.

The D100CRA40A is supplied with Twenty-Four (24) 115 VAC input channels and Sixteen (16) Triac outputs. It supports expansion up to 120 I/O points and installed with the D100 EE10 PROM.

The D100CRA40A requires a power supply voltage of 115VAC. It may be installed with option modules such as an analog input module, expander module, protocol module, multidrop module, RS232 / 422 converter, Timer / Counter access module, Programmable Read Only Memory (PROM) modules which include EEPROM and UVPROM. LCD programmers may also be used to program this controller locally. This LCD programmer has part number D100PG10A.

The D100CRA40A supports direct mounting to the enclosure mounting through the provided Four (4) mounting screws or DIN Rail. It has physical dimension of 100 mm (H) x 320 mm (W). It has an approximate weight of 3 lb or 6 oz or 1.5 kg.

The minimum load current of the Cutler-Hammer D100CRA40A programmable logic controller is 20 mA, 12 Volts DC and it is able to withstand a voltage of 1500 Volts AC per 1 minute. This controller features 24 inputs and 16 outputs and a built-in PROM writer feature. The Cutler-Hammer D100CRA40A programmable logic controller can be combined with an expander unit. Once the controller has been connected to the programmer, the controller can be programmed, edited, monitored and operated. The capacity of the Cutler-Hammer D100CRA40A programmable logic controller can be expanded to a total of 120 I/O.