The D100EA40 is a programmable logic controller manufactured by Eaton Corporation, formerly Cutler-Hammer. It is part of the D100 Series of micro PLCs. The Cutler-Hammer D100EA40 programmable logic controller operates with an input voltage of 24 DC and a triac output. This controller requires a power source of 115V AC. It is under the 40 I/O controller category of the series. It features a 30-centimeter cable. The Cutler-Hammer D100EA40 programmable logic controller features 24 inputs and 16 outputs and a built-in PROM writer feature. Even though this controller is a 40 I/O device, it has an expandable capacity of up to 80 I/O. The Cutler-Hammer D100EA40 programmable logic controller needs a programmer, in order to have all the software and functions available for its correct functioning. Through a programmer, a controller can be monitored, controlled and revised. Another important accessory is an expander unit, which can enable extra inputs and this way allow the controller to be connected to a higher number of devices at the same time. The controller has a built-in RAM memory.
The Cutler-Hammer D100EA40 programmable logic controller should be installed taking into account a number of considerations such as, the operating temperature should not exceed the 0 to 60 degrees Celsius (32 to 140 degrees Fahrenheit) and the storage temperature -15 to 70 degrees Celsius (5 to 167 degrees Fahrenheit); the ambient humidity should be less than 95% and for long-term storage less than 60%. Constant vibrations should be less than 0.5 millimeters peak-to-peak from 10 to 55 Hertz. Finally, the atmosphere should be free of corrosive gases, flammable gases, oil mist, salt, organic solvents or conductive dust caused by the presence of metallic powders.
Repair Services for D100EA40
||Ask|| Get Quote |
Our highly skilled technicians can repair your D100EA40. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.