92-01683-00

The 92-01683-00 terminal is a Panelmate 92** series operator terminal from Eaton Cutler-Hammer. This Panelmate 92** terminal is powered by a Motorola 68340 micro-controller. The terminal comes with a VGA-quality monochrome display which supports a 320 x 240 resolution. A keypad is provided for operator input. The 92-01683-00 terminal requires 24 Volts DC input voltage and the maximum current consumption rating of the unit can go up to 0.5 Amps. The maximum inrush current for the terminal is 35 Amps and the maximum inrush current level can last for 15 microseconds or less. The recommended minimum wire size for DC power is 18 AWG. The communication port available on the 92-01683-00 terminal is a serial port which can be configured for RS-232 and RS-422 communication. The physical interface of the serial port is DB9S.

The baud rate for the serial port on the 92-01683-00 terminal can be configured in the 110 to 19,200 baud range. The serial port can also be used for connecting to a PC for uploads and downloads. The weight of the 92-01683-00 terminal is 4 pounds. The rated heat dissipation of the unit is 42 BTU/hour. The recommended operating and storage temperature ranges are 0 to 50 degrees Celsius and -20 to 60 degrees Celsius, respectively. The relative humidity level should be maintained between 20 and 85% in the location where the terminal is installed. The maximum operating and non-operating altitudes for the terminal are 10,000 feet and 30,000 feet, respectively. The 92-01683-00 terminal has a NEMA 4 or NEMA 12 protection rating when it is installed properly in the corresponding rated enclosures. The terminal is rated for a NEMA 4X level of protection when it is installed in an Eaton Cutler-Hammer stainless steel housing.