IC660EBA025

The IC660EBA025 electronic assembly is an electronic assembly that is meant to operate with an analog output block that has been manufactured and designed by GE Fanuc Automation. This electronic assembly can be used with blocks that operate with a voltage of 24 to 48 Volts DC. This assembly includes all the electronic parts that the block requires to operate properly. This assembly also includes overload protection and electronic fusing. Blocks from this series can shut circuits down within 5 microseconds after detecting the fault, and this is more effective than using thermal fuses. The GE Fanuc Automation IC660EBA025 electronic assembly comes with 6 current source options and it also comes with 2 LEDs that indicate the status of the unit and the I/O that have been enabled. The BSM control that comes with the output block is a 24/48 Volts DC BSM and it has a block to block isolation rating of 1500 Volts for 1 minute.

The GE Fanuc Automation IC660EBA025 electronic assembly operates with a power supply voltage of 18 to 56 Volts DC, a maximum current of 600 milliamps, and a ripple of 10 percent maximum. The output signal characteristics of the GE Fanuc Automation IC660EBA025 electronic assembly include an accuracy rating of 0.15 percent at a temperature of 25 degrees Celsius and an update frequency of 25 milliseconds. The block also comes with diagnostic tools that check for underrange, overrange, and feedback errors. This assembly operates at a temperature range of 0 to 60 degrees Celsius and a relative humidity level of 5 to 95 percent, non-condensing. These temperature and humidity conditions need to be met, otherwise the consistent operation of the block cannot be guaranteed.