IC694MDL250

The IC694MDL250 is a digital input module that belongs to the PACSYstem RX3i product platform of Programmable Automation Controllers (PAC). This module mainly features Sixteen (16) individually isolated input channels that are rated 120 VAC and accept an input voltage range of 0-132 VAC. Within the PACSYstem RX3i family, this module is categorized as a high-voltage module. This module supports Hot-swap feature with improved backplane communication for enhanced input data exchange. The IC694MDL250 is a single slot module that can be installed to any available slot of the PACSystem RX3i and can be used as a local output module, residing along with the CPU rack or as part of a distributed I/O node, installed along with communication adapters. The IC694MDL250 is designed to accept an input current of 14.5 mA with an on the response time of 30 ms and Off response time of 45 ms. The module’s on-state signal range is 74-132 VAC with each channel provided with individual common for input isolation. To terminate input signals to the IC694MDL250, compatible connectors include IC694TBBx32 or IC694TBSx32. It has an internal power consumption of 60 mA at 5 VDC voltage from the backplane. Typically supported devices by the IC694MDL250 are push-button devices, auxiliary contacts, proximity sensors, thumbwheel switches, and similar binary operating devices. With individual channel isolation, this module may continue to operate even with a failed input channel. This module carries certification from UL 508, equivalent to CSA C22.2 No 142M1987 standard and approved for installation in Class I, Div. 2, Groups A, B, C, D application areas.

The IC694MDL250 is a 16-point input module that has been designed and manufactured by GE Fanuc. The module is backed with a high-speed serial bus that is capable of high-speed data transfers. The input module runs with an input voltage rating of 120 Volts AC and it requires CPU firmware version of 3.5 or later for normal operation. All of the 16 points are located on the front panel of the module and they are each equipped with an LED that illuminates when a connection is made to that specific point. The IC694MDL250 16-point input module is compatible with the RX3i PACSystems PLC system and a serial bus with both a normal base and an expansion base. This 16-point input module has a frequency rating of 50 to 60 Hertz. The IC694MDL250 input module can be easily mounted by using a DIN Rail or a panel mounting base. It has been certified to operate safely in a Class 1, Division 2 environment. Since it has an open type of architecture, the module should be used in a clean environment with no EMC noise. The RX3i PLC system is an efficient control system that offers high performance and backs the PAC engine. This system is equipped with PROFINET, which offers real-time distributed I/O. The IC694MDL250 input module features hot swap capability and it supports different application demands. The module is also equipped with a terminal block LED that illuminates green or red. To protect the module from transient electrical noise, an RC snubber is included. The module can be connected to a programming terminal or a personal computer by using the RS-485 port on the input module.