IC694MDL390

The GE Fanuc IC694MDL390 Output Module from the RX3i PacSystem series has a rated voltage of 120 to 240 Volts AC, an output current rating of 2 Amps per point, an inrush current of 25 Amps per cycle, and output voltage range from 85 to 264 Volts AC at a frequency of 50 to 60 Hertz. This module has 5 output points, and every point has a different common. The output circuits can either be used on separate AC supply phases or powered from a single power supply. The AC supply used to run the loads linked to the outputs should be user-supplied. This module can only be operated by using AC power supply and it cannot be powered by using a DC power supply. The GE Fanuc IC694MDL390 Output Module has a 3 Amps rated fuse on each output. It comes with an RC snubber to secure all the outputs from electrical transients on power lines.

The GE Fanuc IC694MDL390 Output Module contains labeled LEDs that indicate the on and off status of all the output points. It also has a red "F" LED which illuminates when one of the output fuses blows. The red band at the top of the module shows that the GE Fanuc IC694MDL390 Output Module is a high-voltage output module. This module has an operating temperature range between 32 and 140 degrees Fahrenheit and a storage temperature range between -40 and 185 degrees Fahrenheit. It has a non-condensing humidity range of 5% to 95%. The module's shock resistance rating is 15 G for 11 milliseconds according to the IEC60068-2-27, and JISC0912 standards and it has a vibration rating of 10 to 57 Hertz, with 0.0524 millimeters (0.006 inches) of peak displacement as per the IEC60068-2-6, and JISC0911 standards.