Product image is representative; revision or series may vary. Contact us to request a specific version.
IC695PSA040
The GE Fanuc / Emerson Automation IC695PSA040 is a PACSystem RX3i power supply. This Power supply has a rated output power of 40 Watts. It operates with an input supply voltage of 85-264VAC or 100-300VDC and provides a variety of output voltage such as +5.1 VDC, +24 VDC relay output, +3.3 VDC for internal use.
-
We sell industrial automation parts backed by our free 2-Year DO Supply Warranty.
-
Same-day domestic and fast international shipping with UPS, FedEx, DHL, and more.
-
AMEX, Visa, MasterCard, Discover, wire transfer, net terms, and more.
-
Repairs and exchanges are available for all automation products.
- Reseller Options
Drop shipping, blind shipping, and account shipping with no extra fees.
Technical specifications for IC695PSA040
| Manufacturer | GE Fanuc Emerson |
|---|---|
| Product Type | Multi-Purpose Power Supply |
| Product Line | RX3i PacSystem |
| Part Number | IC695PSA040 |
| Weight | 1.19 lbs (0.54 kg) |
| Catalog | IC695 |
| Current Per Terminal | 6 Amperes |
| Nominal Voltage | 120/240 VAC or 125 VDC |
| Input Power | 70 W |
| Load Capacity | 40 Watts |
| Module Type | Universal Base Power Supply |
| Backplane Support | Universal Backplane Only |
| Output Type | +5.1 VDC output +24 VDC relay output +3.3 VDC |
| Maximum number of power supply per IC695 rack | Four (4) power supply |
| Voltage Input | 120/240 V AC or 125 V DC |
| AC Power | 85 to 264 V AC |
| DC Power | 100 to 300 V DC |
| Input Power With Full Load | 70 Watts |
| Output Voltage | 24 V DC (19.2 V DC to 28.8 V DC) |
| LED Indicators | Yes |
| Input to Backplane Isolation | 250 V AC continuous/1500 V AC for 1 minute |
The IC695PSA040 is a GE Fanuc / Emerson Automation power supply module that is part of the PACSystem RX3i product family. This power supply has an output power rating of 40 Watts and provided with Three (3) output voltages such as +5.1 VDC output; +24VDC relay output that mat be used to power external circuitry and +3.3 VDC that is used internally by the RX3i system and attached modules to the backplane. This power supply is compatible for use with similar IC695 product family.
The IC695PSA040 is compatible with RX3i universal backplane. This power supply cannot be mixed with other RX3i power supplies residing in the same backplane. RX3i modules that is outside the output power capacity of the IC695PSA040 must be installed in expansion backplanes as the IC695PSA040 does not support increased capacity and redundancy.
The IC695PSA040 is operated by supplying nominal rated voltage of 120/240VAC or 125VDC with voltage ranges of 84-264 VAC or 100 to 300 VDC. It has an input power requirement 70 Watts and capable of withstanding 4 Amperes with maximum duration of 250 ms. The module’s output voltage is range is 19.2 VDC to 28.8 VDC for 24VDC nominal output; 5.0 VDC to 5.2 VDC for 5.1 VDC nominal output and 3.1 VDC to 3.5 VDC for nominal output of 3.3VDC while the output current is 0 -1.6 Amperes for 24VDC; 0 - 6 Amperes for 5.1 VDC and 0 - 9 Amperes for 3.3 VDC output.
The IC695PSA040 is equipped with Four (4) status LED indicators. These LED indicators are Power, P/S Fault, Over Temperature and Overload. It also has an ON/OFF switch, situated behind the hinged door of the power supply unit. The switch is used to enable or disable the power supply. This switch does not cut-off the incoming supply and it is provided with a projecting tab that helps prevent accidental turning ON/OFF the switch.
The GE Fanuc IC695PSA040 module is a power supply manufactured as part of the RX3i PACSystems series. It has a power rating of 120 Volts AC or 240 Volts AC and 125 Volts DC with a power consumption of 40 Watts. This GE Fanuc IC695PSA040 power supply can be used with a DC or AC input voltage source, with operating voltage range of 100 to 300 Volts DC or 85 to 264 Volts AC. This power supply comes with 3 outputs, including 3.3 Volts DC for internal use with modules from the same IC695 series. It also has an output voltage of 5.1 Volts DC and 24 Volts DC relay voltage which is used to power the circuits on the output relay modules.
| Revision Part # | Also known as | |
|---|---|---|
| IC695PSA040AK | IC695PSA040-AK, Series AK, Rev AK | |
| IC695PSA040B | IC695PSA040-B, Series B, Rev B | |
| IC695PSA040E | IC695PSA040-E, Series E, Rev E | |
| IC695PSA040F | IC695PSA040-F, Series F, Rev F | |
| IC695PSA040G | IC695PSA040-G, Series G, Rev G | |
| IC695PSA040H | IC695PSA040-H, Series H, Rev H | |
| IC695PSA040J | IC695PSA040-J, Series J, Rev J | |
| IC695PSA040K | IC695PSA040-K, Series K, Rev K | |
| IC695PSA040L | IC695PSA040-L, Series L, Rev L | |
| IC695PSA040M | IC695PSA040-M, Series M, Rev M | |
| IC695PSA040N | IC695PSA040-N, Series N, Rev N | |
| Don't see your particular revision? Contact us now. | ||
- 1C695PSA040
- 1C695PSAOAO
- IC695PSA04O
- IC695PSA0A0
- IC695PSAO40
- IC695PSAO4O
Does the IC695PSA040 come with a warranty?
Yes, the IC695PSA040 includes a free 2-year DO Supply warranty. You can upgrade to a 3-year warranty at checkout for even more protection.
What is the difference between the IC695PSA040 and IC695PSA140 power supplies?
The IC695PSA040 is a standard power supply and does not support load sharing, extended capacity and redundancy while the IC695PSA140 supports the mentioned functions.
What is the output power rating of the IC695PSA040?
The IC695PSA040 has an output power rating of 40 Watts.
What is the maximum number of daisy-chained IC695PSA040 is permitted for installation?
Up to Four (4) IC695PSA140 power supplies is permitted.
The IC695PSA040 power supply module is manufactured by GE Fanuc as a member of the RX3i series. It operates on a power rating of 125 Volts DC and 120/240 Volts AC. The GE Fanuc IC695PSA040 power supply module supports the use of DC and AC power source with rated voltage ranges of 85 to 264 Volts AC or 100 to 300 Volts DC.